From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Glen Petrie" Date: Thu, 30 Oct 2003 13:29:35 -0800 Message-ID: <005901c39f2c$eb07f310$11031f8a@GWPLAPTOP> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Subject: [Printing-architecture] FW: Your message to Printing-architecture awaits moderator approval Sender: printing-architecture-admin@freestandards.org Errors-To: printing-architecture-admin@freestandards.org List-Help: List-Post: List-Subscribe: , List-Id: List-Unsubscribe: , List-Archive: To: 'printing-architecture' Cc: "Glen (E-mail)" My note is being reviewed. If it does not go through in a couple of days please tell me and I will send it directly to contributors. Rgds, Glen W. Petrie Manager, Software Printing Solutions Epson Imaging Technology Center 150 River Oaks Parkway, Suite 200 San Jose, CA, 95134 Voice: 408.576.4131 Fax: 408.474.0511 -----Original Message----- From: printing-architecture-admin@freestandards.org [mailto:printing-architecture-admin@freestandards.org] Sent: Thursday, October 30, 2003 1:25 PM To: glen.petrie@eitc.epson.com Subject: Your message to Printing-architecture awaits moderator approval Your mail to 'Printing-architecture' with the subject Updated and new Use Models being reviewed Is being held until the list moderator can review it for approval. The reason it is being held: Message body is too big: 86732 bytes but there's a limit of 40 KB Either the message will get posted to the list, or you will receive notification of the moderator's decision.