RE: [PATCH v2] arm64: dts: add cpu cache information to ExynosAuto-v920

["Alim Akhtar" <alim.akhtar@samsung.com>]

Hi Devang

> -----Original Message-----
> From: Devang Tailor <dev.tailor@samsung.com>
> Sent: Wednesday, January 8, 2025 11:20 AM
> To: alim.akhtar@samsung.com; dev.tailor@samsung.com; robh@kernel.org;
> krzk+dt@kernel.org; conor+dt@kernel.org
> Cc: devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> samsung-soc@vger.kernel.org; linux-kernel@vger.kernel.org;
> faraz.ata@samsung.com
> Subject: [PATCH v2] arm64: dts: add cpu cache information to ExynosAuto-
> v920
> 
> Add CPU caches information to its dt nodes so that the same is available to
> userspace via sysfs. This SoC has 64/64 KB I/D cache and 256KB of L2 cache for
> each core, 2 MB of shared L3 cache for each quad cpu cluster and 1 MB of
> shared L3 cache for the dual cpu cluster.
> 
> Signed-off-by: Devang Tailor <dev.tailor@samsung.com>
> 
> ---
> Changes in v2:
> - Added L3 cache for all the three cpu clusters
> - Corrected L2 cache numbering as a part of review comments from Krzysztof
>   and updated as per cpus clusters.
> - Link to v1: https://patchwork.kernel.org/project/linux-arm-
> kernel/patch/20241231064350.523713-1-dev.tailor@samsung.com/
> ---
>  .../arm64/boot/dts/exynos/exynosautov920.dtsi | 127
> ++++++++++++++++++
>  1 file changed, 127 insertions(+)
>
[snip]
 > +		l3_cache_cl0: l3-cache0 {
You can add one node for cl0 and cl1, say "l3_cache_cl0_cl1" and
Remove the specific node for CL1, because both are same. 

> +			compatible = "cache";
> +			cache-level = <3>;
> +			cache-unified;
> +			cache-size = <0x200000>;/* 2MB L3 cache for cpu
> cluster-0 */
> +			cache-line-size = <64>;
> +			cache-sets = <2048>;
> +		};
> +
> +		l3_cache_cl1: l3-cache1 {
> +			compatible = "cache";
> +			cache-level = <3>;
> +			cache-unified;
> +			cache-size = <0x200000>;/* 2MB L3 cache for cpu
> cluster-1 */
> +			cache-line-size = <64>;
> +			cache-sets = <2048>;
> +		};
> +
[snip]
> +		l3_cache_cl2: l3-cache2 {
> 2.34.1