RE: [linux-lvm] What have I done!?

["Jason A. Lixfeld" <jlixfeld@andromedas.com>]

Well, because I don't remember what kernel version I was running or what
version of the LVM code I was running, I think me trying to compile
another kernel with the drivers is going to be very much in vein, so I'm
not going to even bother.

Just like the last message:  If anyone can tell me how go about blowing
away the various LVMs so I can try to re-do this thing, I'd appreciate
it!

> -----Original Message-----
> From: linux-lvm-admin@sistina.com 
> [mailto:linux-lvm-admin@sistina.com] On Behalf Of Jason A. Lixfeld
> Sent: October 3, 2001 10:54 PM
> To: linux-lvm@sistina.com
> Subject: [linux-lvm] What have I done!?
> 
> 
> 
> 
> I was running some kernel version (but I forget which one 
> because I deleted it! :/  Now, I'm running 2.4.10.  I was 
> running LVM 0.9B7 or B8. Don't remember.  I upgraded to 1.0 
> without checking for backwards compatibility and now my life 
> is a living hell!  I then upgraded to 1.0.1-rc4 in hopes that 
> it would help.  Here's a rundown of my current confusion as a 
> result of my stupidity:
> 
> # /sbin/lvscan
> lvscan -- ERROR: VGDA in kernel and lvmtab are NOT 
> consistent; please run vgscan
> 
> # /sbin/vgscan
> vgscan -- reading all physical volumes (this may take a 
> while...) vgscan -- found active volume group "HiTiSO3" 
> vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully 
> created vgscan -- WARNING: This program does not do a VGDA 
> backup of your volume group
> 
> (BTW:  whenever I run vgscan, I get these errors all over the 
> place. The drives are for an LV that is in /proc but not in 
> any of the configs! I even deleted the /dev file hoping it 
> would kill it)
> hdj: read_intr: error=0x04 { DriveStatusError }
> hdj: read_intr: status=0x59 { DriveReady SeekComplete 
> DataRequest Error }
> hdj: read_intr: error=0x04 { DriveStatusError }
> hdj: read_intr: status=0x59 { DriveReady SeekComplete 
> DataRequest Error }
> hdl: read_intr: error=0x04 { DriveStatusError }
> hdl: read_intr: status=0x59 { DriveReady SeekComplete 
> DataRequest Error }
> hdl: read_intr: error=0x04 { DriveStatusError }
> hdl: read_intr: status=0x59 { DriveReady SeekComplete 
> DataRequest Error }
> 
> # /sbin/pvscan
> pvscan -- reading all physical volumes (this may take a 
> while...) pvscan -- inactive PV "/dev/hdm"  is in no VG  [76.34 GB]
> pvscan -- ACTIVE   PV "/dev/hdn1" of VG "foo3" [76.32 GB / 0 free]
> pvscan -- inactive PV "/dev/hdi"  is in no VG  [76.34 GB]
> pvscan -- ACTIVE   PV "/dev/hdg1" of VG "foo3" [76.33 GB / 0 free]
> pvscan -- inactive PV "/dev/hde"  is in no VG  [4.50 MB]
> pvscan -- total: 5 [305.34 GB] / in use: 2 [152.66 GB] / in 
> no VG: 3 [152.67 GB]
> 
> # cat /proc/lvm/global
> LVM driver LVM version 1.0.1-rc4(03/10/2001)
> 
> Total:  2 VGs  4 PVs  2 LVs (1 LV open 1 times)
> 
> Global: 1244191 bytes malloced   IOP version: 10   5:22:56 active
> 
> VG:  foo3  [2 PV, 1 LV/1 open]  PE Size: 4096 KB
>   Usage [KB/PE]: 160071680 /39080 total  160071680 /39080 
> used  0 /0 free
>   PVs: [AA] hdn1                  80031744 /19539   80031744 /19539
> 0 /0     
>        [AA] hdg1                  80039936 /19541   80039936 /19541
> 0 /0     
>     LV:  [AWDL  ] FOO3                     160071680 /39080    1x open
> 
> VG:  foo1  [2 PV, 1 LV/0 open]  PE Size: 4096 KB
>   Usage [KB/PE]: 156295168 /38158 total  156295168 /38158 
> used  0 /0 free
>   PVs: [AA] hdj                   78147584 /19079   78147584 /19079
> 0 /0     
>        [AA] hdl                   78147584 /19079   78147584 /19079
> 0 /0     
>     LV:  [AWDL  ] FOO1                  156295168 /38158    close
> 
> # ls /etc/lvmconf
> foo3.conf
> 
> # more /etc/lvmtab
> foo3
> 
> # ls /etc/lvmtab.d/
> foo3
> 
> # /sbin/pvcreate /dev/hdk
> pvcreate -- ERROR: VGDA in kernel and lvmtab are NOT 
> consistent; please run vgscan
> 
> # /sbin/pvdisplay        
> pvdisplay -- ERROR: VGDA in kernel and lvmtab are NOT 
> consistent; please run vgscan
> 
> # /sbin/vgdisplay
> vgdisplay -- ERROR: VGDA in kernel and lvmtab are NOT 
> consistent; please run vgscan
> 
> # /sbin/lvdisplay
> lvdisplay -- ERROR: VGDA in kernel and lvmtab are NOT 
> consistent; please run vgscan
> 
> There's a couple things:
> 
> 1) I deleted everything in /etc/lv* except for anything 
> related to foo3, yet there is another VG, foo1 in /proc.
> 2) I can't remove inactive drives from showing up in pvscan
> 
> Basically, I just want to delete EVERYTHING EXCEPT for foo3.  
> I'm going to try a downgraded kernel with the old programs 
> and the old drivers and see if that makes any difference (I 
> do have all the configs backed up for the VGs that I deleted 
> previously).
> 
> If anyone has some insight on how I can just delete these 
> things and be done with it, I'd appreciate it.  I can't run 
> any vg commands without getting those VGDA consistency 
> errors.  I tried a fix for that which I found on the 
> archives, but that didn't help at all.
> 
> Any info would be greatly appreciated!!
> 
> -JL
> 
> 
> _______________________________________________
> linux-lvm mailing list
> linux-lvm@sistina.com 
> http://lists.sistina.com/mailman/listinfo/linu> x-lvm
> read the 
> LVM HOW-TO at 
> http://www.sistina.com/lvm/Pages/howto.html
>