All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Olivier Le Pogam" <olepogam@free.fr>
To: "BlueZ development" <bluez-devel@lists.sourceforge.net>
Subject: [Bluez-devel] Creating a connection : Error: Command Disallowed
Date: Thu, 20 Dec 2007 18:08:31 +0100	[thread overview]
Message-ID: <009b01c8432a$f2b9a800$0200a8c0@jester> (raw)


[-- Attachment #1.1: Type: text/plain, Size: 2345 bytes --]

Hello,

When I try to open 3 RFCOMM connections from the same device to 3 remote ones, the first connection is OK but the 2 following give a "Error: Command Disallowed". I suspect an incorrect bluetooth parameter in my hcid.conf (lp ? lm ?)

Any hint is welcome !

PC is running a 2.6.23.12 Kernel with BlueZ 3.23

hcidump & hciconfig are below if it can help !

Thanks a lot,
Oli

------------------------------------------------------------------------

HCI sniffer - Bluetooth packet analyzer ver 1.40
device: hci0 snap_len: 1028 filter: 0xffffffff
2007-12-20 17:58:21.442414 < HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:17:B0:1E:54:FD ptype 0xcc18 rswitch 0x00 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2007-12-20 17:58:21.468697 > HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1

2007-12-20 17:58:21.468711 < HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:19:2D:15:FF:0E ptype 0xcc18 rswitch 0x00 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2007-12-20 17:58:21.472695 > HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x0c ncmd 1
    Error: Command Disallowed

2007-12-20 17:58:21.472705 < HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:16:4E:83:2D:19 ptype 0xcc18 rswitch 0x00 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2007-12-20 17:58:21.476695 > HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x0c ncmd 1
    Error: Command Disallowed

------------------------------------------------------------------------

hci0:   Type: USB
        BD Address: 00:10:60:E8:B6:A1 ACL MTU: 384:8 SCO MTU: 64:8
        UP RUNNING
        RX bytes:9938 acl:157 sco:0 events:350 errors:0
        TX bytes:3965 acl:148 sco:0 commands:118 errors:0
        Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: SNIFF
        Link mode: MASTER
        Name: 'BlueZ'
        Class: 0x000100
        Service Classes: Unspecified
        Device Class: Computer, Uncategorized
        HCI Ver: 2.0 (0x3) HCI Rev: 0x7a6 LMP Ver: 2.0 (0x3) LMP Subver: 0x7a6
        Manufacturer: Cambridge Silicon Radio (10)

[-- Attachment #1.2: Type: text/html, Size: 4399 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

             reply	other threads:[~2007-12-20 17:08 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-12-20 17:08 Olivier Le Pogam [this message]
2007-12-20 18:17 ` [Bluez-devel] Creating a connection : Error: Command Disallowed Peter Wippich
2007-12-20 19:10   ` Marcel Holtmann
2007-12-20 20:07   ` Olivier Le Pogam
2007-12-21 10:15     ` Olivier Le Pogam
2007-12-21 13:39       ` Marcel Holtmann
2007-12-21 13:49         ` Peter Wippich
2007-12-21 14:35           ` Olivier Le Pogam
2007-12-21 14:53             ` Peter Wippich
2007-12-21 19:34               ` Olivier Le Pogam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='009b01c8432a$f2b9a800$0200a8c0@jester' \
    --to=olepogam@free.fr \
    --cc=bluez-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.