From: "Sönke Ruempler" <ruempler@topconcepts.com>
To: <linux-kernel@vger.kernel.org>
Subject: OOPS in vmscan.c:553
Date: Tue, 1 Jul 2003 08:43:27 +0200 [thread overview]
Message-ID: <009c01c33f9c$13bb5cc0$9700a8c0@eagle> (raw)
hi there,
we had that OOPS the last night two times. does anyone know what to do? do
you need more info?
ksymoops 2.4.1 on i686 2.4.21. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.21/ (default)
-m /boot/System.map-2.4.21 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
No modules in ksyms, skipping objects
Warning (read_lsmod): no symbols in lsmod, is /proc/modules a valid lsmod
file?
Warning (compare_maps): ksyms_base symbol GPLONLY___ide_do_rw_disk not found
in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_build_dmatable not
found in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_destroy_dmatable not
found in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_dma_intr not found in
System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_get_best_pio_mode not
found in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_pci_register_driver
not found in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_pci_unregister_driver
not found in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_pio_timings not found
in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_set_xfer_rate not
found in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_setup_dma not found in
System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_setup_pci_device not
found in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_setup_pci_devices not
found in System.map. Ignoring ksyms_base entry
Jun 30 20:42:56 web01 kernel: kernel BUG at vmscan.c:553!
Jun 30 20:42:56 web01 kernel: invalid operand: 0000
Jun 30 20:42:56 web01 kernel: CPU: 0
Jun 30 20:42:56 web01 kernel: EIP: 0010:[refill_inactive+166/256] Not
tainted
Jun 30 20:42:56 web01 kernel: EIP: 0010:[<c0127ff6>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
Jun 30 20:42:56 web01 kernel: EFLAGS: 00010246
Jun 30 20:42:56 web01 kernel: eax: 00000000 ebx: c1122f80 ecx: c1122f9c
edx: c1b619b0
Jun 30 20:42:56 web01 kernel: esi: c1b619b0 edi: 00000007 ebp: 00000002
esp: c1c33f5c
Jun 30 20:42:56 web01 kernel: ds: 0018 es: 0018 ss: 0018
Jun 30 20:42:56 web01 kernel: Process kswapd (pid: 4, stackpage=c1c33000)
Jun 30 20:42:56 web01 kernel: Stack: 00000020 000001d0 00000006 00000020
c0128094 00000008 c0220500 00000006
Jun 30 20:42:56 web01 kernel: 000001d0 c0220500 00000000 c012811c
00000020 c0220500 00000002 c1c32000
Jun 30 20:42:56 web01 kernel: c012822f c02203a0 00000000 ffffffff
0008e000 c01282a6 c02203a0 c1c32000
Jun 30 20:42:56 web01 kernel: Call Trace: [shrink_caches+68/144]
[try_to_free_pages_zone+60/96] [kswapd_balance_pgdat+79/160]
[kswapd_balance+38/64] [kswapd+161/192]
Jun 30 20:42:56 web01 kernel: Call Trace: [<c0128094>] [<c012811c>]
[<c012822f>] [<c01282a6>] [<c01283e1>]
Jun 30 20:42:56 web01 kernel: [<c0128340>] [<c0105000>] [<c01055d6>]
[<c0128340>]
Jun 30 20:42:56 web01 kernel: Code: 0f 0b 29 02 26 c6 1f c0 89 f6 8b 43 18
a9 80 00 00 00 74 08
>>EIP; c0127ff6 <refill_inactive+a6/100> <=====
Trace; c0128094 <shrink_caches+44/90>
Trace; c012811c <try_to_free_pages_zone+3c/60>
Trace; c012822f <kswapd_balance_pgdat+4f/a0>
Trace; c01282a6 <kswapd_balance+26/40>
Trace; c01283e1 <kswapd+a1/c0>
Trace; c0128340 <kswapd+0/c0>
Trace; c0105000 <_stext+0/0>
Trace; c01055d6 <arch_kernel_thread+26/30>
Trace; c0128340 <kswapd+0/c0>
Code; c0127ff6 <refill_inactive+a6/100>
00000000 <_EIP>:
Code; c0127ff6 <refill_inactive+a6/100> <=====
0: 0f 0b ud2a <=====
Code; c0127ff8 <refill_inactive+a8/100>
2: 29 02 sub %eax,(%edx)
Code; c0127ffa <refill_inactive+aa/100>
4: 26 c6 1f c0 movb $0xc0,%es:(%edi)
Code; c0127ffe <refill_inactive+ae/100>
8: 89 f6 mov %esi,%esi
Code; c0128000 <refill_inactive+b0/100>
a: 8b 43 18 mov 0x18(%ebx),%eax
Code; c0128003 <refill_inactive+b3/100>
d: a9 80 00 00 00 test $0x80,%eax
Code; c0128008 <refill_inactive+b8/100>
12: 74 08 je 1c <_EIP+0x1c> c0128012
<refill_inactive+c2/100>
14 warnings issued. Results may not be reliable.
thx, soenke.
reply other threads:[~2003-07-01 6:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='009c01c33f9c$13bb5cc0$9700a8c0@eagle' \
--to=ruempler@topconcepts.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.