From: bing_chou <bing_chou@bandrich.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] about bit rate and wmm
Date: Fri, 31 May 2013 12:13:15 +0800 [thread overview]
Message-ID: <009f01ce5db5$2c442410$84cc6c30$@com> (raw)
Dear ath9k teams
Some questions , please everybody help me , thanks
1.Why does the client?s bit rate highest only show 54M (11g) , when I set
wmm_enabled=0
on the AP?is this normal status?
2. And if I set wmm_enabled=1 , the client?s bit rate can be running on 11n
mode , but no change to 11g or 11b mode and it will disconnect when I
increase the distance?
Chip is AR9341
The hostapd.conf below
root at OpenWrt:/# cat /var/run/hostapd-phy0.conf
ctrl_interface=/var/run/hostapd-phy0
driver=nl80211
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
tx_queue_data3_aifs=7
tx_queue_data3_cwmin=15
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=0
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=15
tx_queue_data2_cwmax=63
tx_queue_data2_burst=0
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5
hw_mode=g
channel=6
country_code=US
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
ieee80211n=1
ht_capab=[HT20][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-
40]
ieee80211d=1
interface=wlan0
ctrl_interface=/var/run/hostapd-phy0
disassoc_low_ack=1
preamble=1
auth_algs=1
wpa=0
ssid=OpenWrt_willis1
bridge=br-lan
wmm_enabled=0
bssid=00:03:7f:00:00:05
ignore_broadcast_ssid=0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20130531/72651900/attachment.htm
reply other threads:[~2013-05-31 4:13 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='009f01ce5db5$2c442410$84cc6c30$@com' \
--to=bing_chou@bandrich.com \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.