From: Robert <xiaguowu@yahoo.com.cn>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Linux couldn't start up
Date: Thu, 14 Feb 2008 17:42:37 +0800 [thread overview]
Message-ID: <00a101c86eed$f0aca550$3400a8c0@xgw> (raw)
Hi,
I make a linux uImage with command "make uImage" ,
and linux kernel can start up after downloading it into the
target board, but now I want to generate uImage by vmlinux
with mkimage, not by "make uImage",so I do it as follows:
1)arm-none-linux-gnueabi-objcopy -O binary -R .note -R .comment \
-S /home/linux-2.6.12/vmlinux /home/temp/vmlinux.bin
2)gzip -9 /home/temp/vmlinux.bin
3)mkimage -A arm -O linux -T kernel -C none \
-a 00008000 -e 00008000 \
-n 'Linux-2.6.12.6-arm1' -d /home/temp/vmlinux.bin.gz /home/temp/uImage
At last, I load uImage to ram to run, but the following message happens:
Marvell>> tftp 0x400000 uImage
Using egiga0 device
TFTP from server 192.168.0.53; our IP address is 192.168.0.54
Filename 'uImage'.
Load address: 0x400000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
##########
done
Bytes transferred = 1710086 (1a1806 hex)
Marvell>> bootm 0x400000
## Booting image at 00400000 ...
Image Name: Linux-2.6.12.6-arm1
Created: 2008-02-03 17:12:54 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1710022 Bytes = 1.6 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
Starting kernel ...
undefined instruction
pc : [<ffffffff>] lr : [<00249274>]
sp : 001ff16c ip : ffffffff fp : 001ff694
r10: 00000000 r9 : 002570a8 r8 : 001fffd4
r7 : 000000ff r6 : 0027ee58 r5 : 00000000 r4 : 0027ee58
r3 : 00008000 r2 : 00000100 r1 : 0000020e r0 : 00000000
Flags: NZCV IRQs off FIQs off Mode SYS_32
Resetting CPU ...
Can anybody tell me what happend?
Thanks in advance!
With kind regards,
Rboert
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080214/c2b87e2f/attachment.htm
next reply other threads:[~2008-02-14 9:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-14 9:42 Robert [this message]
2008-02-14 10:23 ` [U-Boot-Users] Linux couldn't start up Anatolij Gustschin
2008-02-14 10:37 ` Anatolij Gustschin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='00a101c86eed$f0aca550$3400a8c0@xgw' \
--to=xiaguowu@yahoo.com.cn \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.