From: "Håkan Lager" <hakan@digiloo.net>
To: <Bluez-users@lists.sourceforge.net>
Subject: [Bluez-users] VB: Problem with 2nd second dongle
Date: Mon, 13 Nov 2006 21:39:10 +0100 [thread overview]
Message-ID: <00a301c70763$c64a3fe0$0200a8c0@BLACKBIRD> (raw)
I begin to suspect this is a dbus error. Is there any simple way to check
this suspicion?
-----Ursprungligt meddelande-----
Fr=E5n: H=E5kan Lager [mailto:hakan@digiloo.net] =
Skickat: den 13 november 2006 19:23
Till: 'BlueZ users'
=C4mne: SV: [Bluez-users] Problem with 2nd second dongle
Hi,
After mounted the /proc/bus/usb filesystem the result is this:
Nov 13 18:18:12 ts7200 daemon.info hcid[145]: HCI dev 0 down
Nov 13 18:18:12 ts7200 daemon.info hcid[145]: Stoping security manager 0
Nov 13 18:18:12 ts7200 daemon.info hcid[145]: HCI dev 0 unregistered
Nov 13 18:18:16 ts7200 daemon.info hcid[145]: HCI dev 0 registered
Nov 13 18:18:16 ts7200 daemon.info hcid[145]: HCI dev 0 up
Nov 13 18:18:16 ts7200 daemon.info hcid[145]: Starting security manager 0
Nov 13 18:18:53 ts7200 daemon.info hcid[145]: HCI dev 1 registered
Nov 13 18:18:53 ts7200 daemon.err hcid[186]: Can't init device hci1: No such
device (19)
Nov 13 18:18:53 ts7200 daemon.info hcid[145]: HCI dev 1 unregistered
Nov 13 18:18:53 ts7200 daemon.info hcid[145]: HCI dev 1 registered
Nov 13 18:19:03 ts7200 daemon.err hcid[195]: Can't init device hci1:
Connection timed out (110)
cat /proc/bus/usb/devices gives:
$ cat /proc/bus/usb/devices
T: Bus=3D01 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 MxC=
h=3D 3
B: Alloc=3D 38/900 us ( 4%), #Int=3D 2, #Iso=3D 2
D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0000 ProdID=3D0000 Rev=3D 0.00
S: Product=3DUSB OHCI Root Hub
S: SerialNumber=3De0020000
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 2 Ivl=3D255ms
T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D00 Cnt=3D01 Dev#=3D 2 Spd=3D12 MxC=
h=3D 2
D: Ver=3D 2.00 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D64 #Cfgs=3D 1
P: Vendor=3D0409 ProdID=3D005a Rev=3D 1.00
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3De0 MxPwr=3D100mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 1 Ivl=3D255ms
T: Bus=3D01 Lev=3D02 Prnt=3D02 Port=3D00 Cnt=3D01 Dev#=3D 9 Spd=3D12 MxC=
h=3D 0
D: Ver=3D 1.10 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D 1
P: Vendor=3D050d ProdID=3D0084 Rev=3D 5.25
C:* #Ifs=3D 3 Cfg#=3D 1 Atr=3Dc0 MxPwr=3D 0mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 16 Ivl=3D1ms
E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
E: Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
I: If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
I: If#=3D 1 Alt=3D 1 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
I: If#=3D 1 Alt=3D 2 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
I: If#=3D 1 Alt=3D 3 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
I: If#=3D 1 Alt=3D 4 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
I: If#=3D 1 Alt=3D 5 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
I: If#=3D 2 Alt=3D 0 #EPs=3D 0 Cls=3Dfe(app. ) Sub=3D01 Prot=3D00 Driver=
=3D(none)
T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D02 Cnt=3D02 Dev#=3D 7 Spd=3D12 MxC=
h=3D 0
D: Ver=3D 1.10 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D 1
P: Vendor=3D0db0 ProdID=3D6970 Rev=3D 5.25
C:* #Ifs=3D 3 Cfg#=3D 1 Atr=3D80 MxPwr=3D100mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 16 Ivl=3D1ms
E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
E: Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
I: If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
I: If#=3D 1 Alt=3D 1 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
I: If#=3D 1 Alt=3D 2 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
I: If#=3D 1 Alt=3D 3 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
I: If#=3D 1 Alt=3D 4 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
I: If#=3D 1 Alt=3D 5 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
I: If#=3D 2 Alt=3D 0 #EPs=3D 0 Cls=3Dfe(app. ) Sub=3D01 Prot=3D00 Driver=
=3D(none)
/ Hakan
-----Ursprungligt meddelande-----
Fr=E5n: bluez-users-bounces@lists.sourceforge.net
[mailto:bluez-users-bounces@lists.sourceforge.net] F=F6r Marcel Holtmann
Skickat: den 13 november 2006 18:44
Till: BlueZ users
=C4mne: Re: [Bluez-users] Problem with 2nd second dongle
Hi,
> OK; But it work with one dongle...
it can be a bug (however I have multiple dongles working without any
problems) or simply a bad dongle or even a USB bus issue.
Regards
Marcel
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D1=
21642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easi=
er
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D1=
21642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next reply other threads:[~2006-11-13 20:39 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-11-13 20:39 Håkan Lager [this message]
2006-11-16 10:32 ` [Bluez-users] VB: Problem with 2nd second dongle Marcel Holtmann
2006-11-18 15:08 ` Håkan Lager
2006-11-18 18:31 ` Andres Vargas - zodman
2006-11-18 17:02 ` Håkan Lager
2006-11-18 21:40 ` Andres Vargas - zodman
2006-11-18 20:04 ` Håkan Lager
2006-11-18 23:01 ` Andres Vargas - zodman
2006-11-19 1:45 ` Håkan Lager
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='00a301c70763$c64a3fe0$0200a8c0@BLACKBIRD' \
--to=hakan@digiloo.net \
--cc=Bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.