From: linuxppc_em@sina.com
To: "zzh" <david-1z@263.net>
Cc: <linuxppc-embedded@lists.linuxppc.org>
Subject: Re: About rs232 on motorola mpc8260 ads board
Date: Fri, 17 Mar 2000 14:23:15 +0800 [thread overview]
Message-ID: <00c301bf8fd9$48293ac0$1ac809c0@johnzhan> (raw)
In-Reply-To: 38D88437.23494@mta2
----- Original Message -----
From: zzh <david-1z@263.net>
To: <linuxppc-embedded@lists.linuxppc.org>
Sent: Wednesday, March 22, 2000 4:28 PM
Subject: About rs232 on motorola mpc8260 ads board
>
> Hello,everyone.
> I'm trying to make the SCC1 drived rs232 port of a motorola
> mpc8260 ads board work.The manual says it can direct connect
> to pc com port.But it seems the output from this board is not
> rs232 voltage.i.e -3 to -12 for logical one,3 to 12 for logical
> zero,nor is it TTL,it seems that it use 0 for logical 1,5.0v for
> logical 0,so it is rather annoying. I have to invert the output
> from 8260 ads,then use a TTL->232 converter to connect with PC,
> it works when i send char from 8260,but cannot work in the
> other direction.
> In addition,for a while,it output 232 signal,but i cannot
> reproduce it!!
> Does anyone has experience with this board?
> Thanks for your advice.
> davidzhang
> 3/22/2000
>
> _____________________________________________
> 首都在线--中国人的网上家园 http://www.263.net
> @263.net中国最大的在线邮局 http://freemail.263.net
>
Pavel Roskin is right , that means to check RTS(from ads) or enable it manually.
b.r.
john zhan.
hacking time.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2000-03-17 6:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-03-22 8:28 About rs232 on motorola mpc8260 ads board zzh
2000-03-17 6:23 ` linuxppc_em [this message]
2000-03-22 19:16 ` Pavel Roskin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='00c301bf8fd9$48293ac0$1ac809c0@johnzhan' \
--to=linuxppc_em@sina.com \
--cc=david-1z@263.net \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.