From: "Girish" <girishsg@ti.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH 5/5]Twl4030- Keypad support on OMAP 3430
Date: Fri, 2 Nov 2007 20:55:02 +0530 [thread overview]
Message-ID: <00f901c81d64$89fa0c60$6a8918ac@ent.ti.com> (raw)
This patch supports Keypad on 3430
Signed-off-by: Girish S G <girishsg@ti.com>
---
arch/arm/configs/omap_3430sdp_defconfig | 1
arch/arm/mach-omap2/board-3430sdp.c | 53 ++++++++++++++++++++++++++++++++
drivers/input/keyboard/Kconfig | 2 -
3 files changed, 55 insertions(+), 1 deletion(-)
Index: linux-omap-git/arch/arm/configs/omap_3430sdp_defconfig
===================================================================
--- linux-omap-git.orig/arch/arm/configs/omap_3430sdp_defconfig 2007-10-25 21:10:13.000000000 +0530
+++ linux-omap-git/arch/arm/configs/omap_3430sdp_defconfig 2007-10-25 21:11:41.000000000 +0530
@@ -545,6 +545,7 @@
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_TWL4030=y
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
Index: linux-omap-git/arch/arm/mach-omap2/board-3430sdp.c
===================================================================
--- linux-omap-git.orig/arch/arm/mach-omap2/board-3430sdp.c 2007-10-25 21:10:13.000000000 +0530
+++ linux-omap-git/arch/arm/mach-omap2/board-3430sdp.c 2007-10-25 21:17:26.000000000 +0530
@@ -18,6 +18,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
+#include <linux/input.h>
#include <linux/workqueue.h>
#include <linux/err.h>
#include <linux/clk.h>
@@ -36,6 +37,7 @@
#include <asm/arch/mux.h>
#include <asm/arch/board.h>
#include <asm/arch/common.h>
+#include <asm/arch/keypad.h>
#include <asm/arch/dma.h>
#include <asm/arch/gpmc.h>
@@ -122,6 +124,56 @@
.resource = sdp3430_smc91x_resources,
};
+static int sdp3430_keymap[] = {
+ KEY(0, 0, KEY_LEFT),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_A),
+ KEY(0, 3, KEY_B),
+ KEY(0, 4, KEY_C),
+ KEY(1, 0, KEY_DOWN),
+ KEY(1, 1, KEY_UP),
+ KEY(1, 2, KEY_E),
+ KEY(1, 3, KEY_F),
+ KEY(1, 4, KEY_G),
+ KEY(2, 0, KEY_ENTER),
+ KEY(2, 1, KEY_I),
+ KEY(2, 2, KEY_J),
+ KEY(2, 3, KEY_K),
+ KEY(2, 4, KEY_3),
+ KEY(3, 0, KEY_M),
+ KEY(3, 1, KEY_N),
+ KEY(3, 2, KEY_O),
+ KEY(3, 3, KEY_P),
+ KEY(3, 4, KEY_Q),
+ KEY(4, 0, KEY_R),
+ KEY(4, 1, KEY_4),
+ KEY(4, 2, KEY_T),
+ KEY(4, 3, KEY_U),
+ KEY(4, 4, KEY_D),
+ KEY(5, 0, KEY_V),
+ KEY(5, 1, KEY_W),
+ KEY(5, 2, KEY_L),
+ KEY(5, 3, KEY_S),
+ KEY(5, 4, KEY_H),
+ 0
+};
+
+static struct omap_kp_platform_data sdp3430_kp_data = {
+ .rows = 5,
+ .cols = 6,
+ .keymap = sdp3430_keymap,
+ .keymapsize = ARRAY_SIZE(sdp3430_keymap),
+ .rep = 1,
+};
+
+static struct platform_device sdp3430_kp_device = {
+ .name = "omap_twl4030keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &sdp3430_kp_data,
+ },
+};
+
/**
* @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
*
@@ -205,6 +257,7 @@
static struct platform_device *sdp3430_devices[] __initdata = {
&sdp3430_smc91x_device,
&sdp3430_flash_device,
+ &sdp3430_kp_device,
};
static inline void __init sdp3430_init_smc91x(void)
Index: linux-omap-git/drivers/input/keyboard/Kconfig
===================================================================
--- linux-omap-git.orig/drivers/input/keyboard/Kconfig 2007-10-25 21:10:13.000000000 +0530
+++ linux-omap-git/drivers/input/keyboard/Kconfig 2007-10-25 21:11:41.000000000 +0530
@@ -219,7 +219,7 @@
config KEYBOARD_TWL4030
tristate "TI TWL4030 keypad support"
- depends on TWL4030_CORE && MACH_OMAP_2430SDP
+ depends on TWL4030_CORE && (MACH_OMAP_2430SDP || MACH_OMAP_3430SDP)
help
Say Y here if you want to use the OMAP TWL4030 keypad.
next reply other threads:[~2007-11-02 15:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-02 15:25 Girish [this message]
2007-11-16 22:28 ` [PATCH 5/5]Twl4030- Keypad support on OMAP 3430 Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='00f901c81d64$89fa0c60$6a8918ac@ent.ti.com' \
--to=girishsg@ti.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.