From: s-jaschke@t-online.de (Stefan Jaschke)
To: Oliver Teuber <teuber@core.devicen.de>
Cc: linux-kernel@vger.kernel.org, epic@skyld.com
Subject: Re: epic100 error
Date: Fri, 20 Apr 2001 13:09:15 +0200 [thread overview]
Message-ID: <01042013091501.07156@antares> (raw)
In-Reply-To: <20010417184552.A6727@core.devicen.de>
In-Reply-To: <20010417184552.A6727@core.devicen.de>
Hi,
it seems the epic100 driver broke between 2.4.2 and 2.4.3.
I reloaded the epic100 module with the parameter "debug=6".
Unfortunately, I cannot make much out of the log:
Apr 20 12:47:01 antares kernel: epic100.c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>
Apr 20 12:47:01 antares kernel: http://www.scyld.com/network/epic100.html
Apr 20 12:47:01 antares kernel: (unofficial 2.4.x kernel port, version 1.1.6, January 11, 2001)
Apr 20 12:47:01 antares kernel: epic100(00:08.0): EEPROM contents
Apr 20 12:47:01 antares kernel: e000 2829 ec39 aa00 001d 1c08 10b8 a011 0000 0000 0000 0000 0000 0000 0000 0000
Apr 20 12:47:01 antares kernel: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Apr 20 12:47:01 antares kernel: 0010 0000 1980 2100 0000 0000 0003 0000 0701 0000 0000 0000 4d53 3943 3334 5432
Apr 20 12:47:01 antares kernel: 2058 2020 0000 0000 0280 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Apr 20 12:47:01 antares kernel: epic100(00:08.0): MII transceiver #3 control 3000 status 7809.
Apr 20 12:47:01 antares kernel: epic100(00:08.0): Autonegotiation advertising 01e1 link partner 0001.
Apr 20 12:47:01 antares kernel: eth0: SMSC EPIC/100 83c170 at 0xd800, IRQ 9, 00:e0:29:28:39:ec.
Apr 20 12:48:07 antares kernel: eth0: Setting half-duplex based on MII xcvr 3 register read of 0001.
Apr 20 12:48:07 antares kernel: eth0: epic_open() ioaddr d800 IRQ 9 status 0512 half-duplex.
Apr 20 12:48:10 antares kernel: eth0: Media monitor tick, Tx status 0000000b.
Apr 20 12:48:10 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:10 antares kernel: eth0: Setting full-duplex based on MII #3 link partner capability of 41e1.
Apr 20 12:48:15 antares kernel: eth0: Media monitor tick, Tx status 0000000b.
Apr 20 12:48:15 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:20 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:20 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:25 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:25 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:30 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:30 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:35 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:35 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:40 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:40 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:45 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:45 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:45 antares kernel: eth0: Interrupt, status=0x00250001 new intstat=0x00240000.
Apr 20 12:48:45 antares kernel: In epic_rx(), entry 0 00601021.
Apr 20 12:48:45 antares kernel: epic_rx() status was 00601021.
Apr 20 12:48:45 antares kernel: eth0: Interrupt, status=0x00240000 new intstat=0x00240000.
Apr 20 12:48:45 antares kernel: eth0: exiting interrupt, intr_status=0x240000.
Apr 20 12:48:46 antares kernel: eth0: Interrupt, status=0x008d0004 new intstat=0x008c0000.
Apr 20 12:48:46 antares last message repeated 32 times
Apr 20 12:48:46 antares kernel: eth0: Too much work at interrupt, IntrStatus=0x008d0004.
Apr 20 12:48:46 antares kernel: eth0: exiting interrupt, intr_status=0x8d0004.
Apr 20 12:48:50 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:50 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 8c0000 RxStatus 6014a1.
Apr 20 12:48:55 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:55 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 8c0000 RxStatus 6014a1.
I also noted that there are substantial differences between the original epic100.c at
http://www.scyld.com/network/epic100.html and the version included with 2.4.3.
Who did these changes?
Stefan J.
--
Stefan R. Jaschke <stefan@jaschke-net.de>
http://www.jaschke-net.de
next prev parent reply other threads:[~2001-04-20 11:09 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-04-17 16:45 epic100 error Oliver Teuber
2001-04-17 20:34 ` Stefan Jaschke
[not found] ` <20010418204021.A14531@se1.cogenit.fr>
2001-04-20 8:22 ` Stefan Jaschke
2001-04-20 10:25 ` Francois Romieu
2001-04-20 11:30 ` Stefan Jaschke
2001-04-20 14:05 ` Stefan Jaschke
2001-04-20 14:33 ` Francois Romieu
2001-04-20 15:57 ` Stefan Jaschke
2001-04-20 16:45 ` Francois Romieu
2001-04-20 20:13 ` Stefan Jaschke
2001-04-20 11:09 ` Stefan Jaschke [this message]
2001-04-20 11:33 ` Jeff Garzik
2001-04-20 12:07 ` Stefan Jaschke
2001-04-20 8:14 ` Arnaldo Carvalho de Melo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=01042013091501.07156@antares \
--to=s-jaschke@t-online.de \
--cc=epic@skyld.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stefan@jaschke-net.de \
--cc=teuber@core.devicen.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.