All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andreas Hartmann <andihartmann@freenet.de>
To: "Kernel-Mailingliste" <linux-kernel@vger.kernel.org>
Subject: Re: [2.4.4ac11 - 2.4.5 and 2.4.5ac5] problems with stat continue (ln -s broken ...?)
Date: Wed, 30 May 2001 23:05:20 +0200	[thread overview]
Message-ID: <01053023011500.02902@athlon> (raw)
In-Reply-To: <01052500061100.01519@athlon> <01052611582000.11785@athlon>
In-Reply-To: <01052611582000.11785@athlon>

Hallo all!

I know that I'm repeating myself - but the problem is still the same. It's 
impossible for me to use these kernels mentioned in the subject.

I think there is a parallelism to the mail "ln -s broken on 2.4.5" or am I 
the problem? Who can help me?

Regards,
Andreas Hartmann


> Hallo all,
>
> I get the mentioned error as often as longer the system is running. E.g.:
> $ ls kviewshell/.libs/libkmultipage.so
>
> The following is what strace say's:
>
> [....]
> 3795  lstat("kviewshell/.libs/libkmultipage.so", 0xbffff718) = -1 EIO
> (Input/output error)
> [...]
>
> The file really exists and is correct!
>
> Another example is:
> umount /boot
>
> That's what strace is saying:
> [...]
>
> 3762  open("/etc/mtab~3762", O_WRONLY|O_CREAT, 0) = 4
> 3762  close(4)                          = 0
> 3762  link("/etc/mtab~3762", "/etc/mtab~") = -1 ENOENT (No such file or
> directory)
> 3762  unlink("/etc/mtab~3762")          = 0
> [....]
>
> I've got no problems with 2.4.4ac9 and ac10. The Problems start with ac11
> and can be found until the actual ac17.
>
>
> Versions:
> Linux athlon 2.4.4-ac16 #1 Don Mai 24 22:47:31 CEST 2001 i686 unknown
>
> Gnu C                  2.95.3
> Gnu make               3.76.1
> binutils               2.9.5.0.12
> util-linux             2.10s
> mount                  2.10s
> modutils               2.4.5
> e2fsprogs              1.19
> PPP                    2.4.0b1
> Linux C Library        2.1.3
> Dynamic linker (ldd)   2.1.3
> Procps                 2.0.2
> Net-tools              1.56
> Kbd                    0.96
> Sh-utils               2.0g
> Modules Loaded         ext2 nfs lockd sunrpc 8139too sis900 serial
> parport_pc lp parport unix
>
> I'm using reiserfs, 3.5.x disk format.
>
>
> $ lspci -v
>
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8371 [KX133] (rev 02)
> 	Flags: bus master, medium devsel, latency 0
> 	Memory at d6000000 (32-bit, prefetchable) [size=32M]
> 	Capabilities: <available only to root>
>
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8371 [PCI-PCI Bridge] (prog-if
> 00 [Normal decode])
> 	Flags: bus master, 66Mhz, medium devsel, latency 0
> 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> 	I/O behind bridge: 0000c000-0000cfff
> 	Memory behind bridge: d4000000-d5ffffff
> 	Prefetchable memory behind bridge: d0000000-d3ffffff
> 	Capabilities: <available only to root>
>
> 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22)
> 	Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
> 	Flags: bus master, stepping, medium devsel, latency 0
>
> 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev
> 10) (prog-if 8a [Master SecP PriP])
> 	Flags: bus master, medium devsel, latency 32
> 	I/O ports at d000 [size=16]
> 	Capabilities: <available only to root>
>
> 00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
> (prog-if 00 [UHCI])
> 	Subsystem: Unknown device 0925:1234
> 	Flags: bus master, medium devsel, latency 32, IRQ 9
> 	I/O ports at d400 [size=32]
> 	Capabilities: <available only to root>
>
> 00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> (rev 30)
> 	Flags: medium devsel, IRQ 9
> 	Capabilities: <available only to root>
>
> 00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686
> [Apollo Super AC97/Audio] (rev 20)
> 	Subsystem: VIA Technologies, Inc.: Unknown device 4511
> 	Flags: medium devsel, IRQ 5
> 	I/O ports at dc00 [size=256]
> 	I/O ports at e000 [size=4]
> 	I/O ports at e400 [size=4]
> 	Capabilities: <available only to root>
>
> 00:08.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100
> Ethernet (rev 02)
> 	Subsystem: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet Adapter
> 	Flags: bus master, medium devsel, latency 32, IRQ 10
> 	I/O ports at e800 [size=256]
> 	Memory at d9000000 (32-bit, non-prefetchable) [size=4K]
> 	Expansion ROM at <unassigned> [disabled] [size=128K]
> 	Capabilities: <available only to root>
>
> 00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev
> 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139
> 	Flags: bus master, medium devsel, latency 32, IRQ 11
> 	I/O ports at ec00 [size=256]
> 	Memory at d9001000 (32-bit, non-prefetchable) [size=256]
> 	Expansion ROM at <unassigned> [disabled] [size=64K]
>
> 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF
> (prog-if 00 [VGA])
> 	Subsystem: ATI Technologies Inc: Unknown device 0008
> 	Flags: bus master, stepping, 66Mhz, medium devsel, latency 32, IRQ 10
> 	Memory at d0000000 (32-bit, prefetchable) [size=64M]
> 	I/O ports at c000 [size=256]
> 	Memory at d5000000 (32-bit, non-prefetchable) [size=16K]
> 	Expansion ROM at <unassigned> [disabled] [size=128K]
> 	Capabilities: <available only to root>
>
>
>
> Regards,
> Andreas Hartmann

      reply	other threads:[~2001-05-30 21:05 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-05-24 22:06 [2.4.4ac15/16] problems with stat or link Andreas Hartmann
2001-05-26  9:58 ` [2.4.4ac11-17] lasting " Andreas Hartmann
2001-05-30 21:05   ` Andreas Hartmann [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=01053023011500.02902@athlon \
    --to=andihartmann@freenet.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.