From: Derkjan de Haan <derkjan.de.haan@knvb.nl>
To: alan@lxorguk.ukuu.org.uk
Cc: linux-kernel@vger.kernel.org
Subject: 3Com pcmcia network card stopped working in 2.4.5-ac12
Date: Mon, 11 Jun 2001 12:37:01 +0200 [thread overview]
Message-ID: <01061112370100.01029@flaptop.zeis.knvb.nl> (raw)
Hi Alan,
I'd like to report that starting with 2.4.5-ac12 my pcmcia network card
(3CXFEM656C) doesn't get initialized correctly. I'm using Redhat 7.1
When using modules:
Jun 11 08:34:54 flaptop kernel: PCI: PCI BIOS revision 2.10 entry at 0xfc0be,
last bus=1
Jun 11 08:34:54 flaptop kernel: PCI: Using configuration type 1
Jun 11 08:34:54 flaptop kernel: PCI: Probing PCI hardware
Jun 11 08:34:54 flaptop kernel: Unknown bridge resource 2: assuming
transparent Jun 11 08:34:54 flaptop kernel: PCI: Using IRQ router PIIX
[8086/7110] at 00:07.0
Jun 11 08:34:54 flaptop kernel: got res[10000000:10000fff] for resource 0
of Texas Instruments PCI1225
Jun 11 08:34:54 flaptop kernel: got res[10001000:10001fff] for resource 0
of Texas Instruments PCI1225 (#2)
Jun 11 08:34:54 flaptop kernel: Limiting direct PCI/PCI transfers.
Jun 11 08:34:55 flaptop kernel: Linux Kernel Card Services 3.1.22
Jun 11 08:34:55 flaptop kernel: options: [pci] [cardbus] [pm]
Jun 11 08:34:56 flaptop kernel: PCI: Found IRQ 11 for device 00:03.0
Jun 11 08:34:56 flaptop kernel: PCI: The same IRQ used for device 00:03.1
Jun 11 08:34:56 flaptop kernel: PCI: The same IRQ used for device 00:07.2
Jun 11 08:34:56 flaptop kernel: PCI: Found IRQ 11 for device 00:03.1
Jun 11 08:34:56 flaptop kernel: PCI: The same IRQ used for device 00:03.0
Jun 11 08:34:56 flaptop kernel: PCI: The same IRQ used for device 00:07.2
Jun 11 08:34:56 flaptop kernel: Yenta IRQ list 0498, PCI irq11
Jun 11 08:34:56 flaptop kernel: Socket status: 30000020
Jun 11 08:34:56 flaptop kernel: Yenta IRQ list 0498, PCI irq11
Jun 11 08:34:56 flaptop kernel: Socket status: 30000006
Jun 11 08:34:53 flaptop ifup: Delaying eth0 initialization.
Jun 11 08:34:53 flaptop network: Bringing up interface eth0: failed
Jun 11 08:34:56 flaptop kernel: cs: cb_alloc(bus 2): vendor 0x10b7, device
0x6564
Jun 11 08:34:56 flaptop kernel: got res[1000:10ff] for resource 0 of PCI
device 10b7:6564
Jun 11 08:34:56 flaptop kernel: got res[10800000:1080007f] for resource 1
of PCI device 10b7:6564
Jun 11 08:34:56 flaptop kernel: got res[10800080:108000ff] for resource 2
of PCI device 10b7:6564
Jun 11 08:34:56 flaptop kernel: got res[10400000:1041ffff] for resource 6
of PCI device 10b7:6564
Jun 11 08:34:56 flaptop kernel: PCI: Enabling device 02:00.0 (0000 -> 0003)
Jun 11 08:34:56 flaptop kernel: got res[1400:14ff] for resource 0 of PCI
device 10b7:6565
Jun 11 08:34:56 flaptop kernel: got res[10800100:108001ff] for resource 1
of PCI device 10b7:6565
Jun 11 08:34:56 flaptop kernel: got res[10800200:1080027f] for resource 2
of PCI device 10b7:6565
Jun 11 08:34:56 flaptop kernel: PCI: Enabling device 02:00.1 (0000 -> 0003)
Jun 11 08:34:56 flaptop pcmcia: cardmgr.
Jun 11 08:34:56 flaptop cardmgr[456]: starting, version is 3.1.22
Jun 11 08:34:57 flaptop rc: Starting pcmcia: succeeded
Jun 11 08:34:57 flaptop cardmgr[456]: watching 2 sockets
Jun 11 08:34:57 flaptop kernel: cs: IO port probe 0x0c00-0x0cff: clean.
Jun 11 08:34:57 flaptop kernel: cs: IO port probe 0x0100-0x04ff: excluding
0x280-0x287 0x2f8-0x2ff 0x378-0x37f 0x3f8-0x3ff 0x4d0-0x4d7
Jun 11 08:34:57 flaptop kernel: cs: IO port probe 0x1000-0x17ff: clean.
Jun 11 08:34:57 flaptop kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Jun 11 08:34:57 flaptop cardmgr[456]: initializing socket 0
Jun 11 08:34:57 flaptop cardmgr[456]: socket 0: 3Com 3CXFEM656C w/Winmodem
Jun 11 08:34:57 flaptop cardmgr[456]: executing: 'modprobe cb_enabler'
Jun 11 08:34:57 flaptop /etc/hotplug/pci.agent: ... no drivers for PCI slot
Jun 11 08:34:57 flaptop cardmgr[456]: executing: 'modprobe 3c59x'
Jun 11 08:34:59 flaptop cardmgr[456]: get dev info on socket 0 failed:
Resource temporarily unavailable
The interesting thing is, that after a /etc/init.d/pcmcia restart, the
interface comes up.
When compiled into kernel:
Jun 11 09:09:21 flaptop kernel: Linux Kernel Card Services 3.1.22
Jun 11 09:09:21 flaptop kernel: options: [pci] [cardbus] [pm]
Jun 11 09:09:21 flaptop kernel: PCI: Found IRQ 11 for device 00:03.0
Jun 11 09:09:21 flaptop kernel: PCI: The same IRQ used for device 00:03.1
Jun 11 09:09:21 flaptop kernel: PCI: The same IRQ used for device 00:07.2
Jun 11 09:09:21 flaptop kernel: PCI: Found IRQ 11 for device 00:03.1
Jun 11 09:09:21 flaptop kernel: PCI: The same IRQ used for device 00:03.0
Jun 11 09:09:21 flaptop kernel: PCI: The same IRQ used for device 00:07.2
Jun 11 09:09:21 flaptop kernel: Intel PCIC probe: not found.
Jun 11 09:09:21 flaptop kernel: Yenta IRQ list 0698, PCI irq11
Jun 11 09:09:21 flaptop kernel: Socket status: 30000020
Jun 11 09:09:21 flaptop kernel: Yenta IRQ list 0698, PCI irq11
Jun 11 09:09:21 flaptop kernel: Socket status: 30000006
Jun 11 09:09:21 flaptop kernel: cs: cb_alloc(bus 2): vendor 0xffff, device
0xffff
Jun 11 09:09:21 flaptop kernel: PCI: device 02:00.0 has unknown header type
7f, ignoring.
I'll gladly provide additional logging or whatever may be needed.
regards,
Derkjan
reply other threads:[~2001-06-11 10:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=01061112370100.01029@flaptop.zeis.knvb.nl \
--to=derkjan.de.haan@knvb.nl \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.