From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.ireste.fr (mail.ireste.fr [193.52.81.37]) by dsl2.external.hp.com (Postfix) with ESMTP id A29CF482B for ; Tue, 10 Jul 2001 09:22:23 -0600 (MDT) Received: from flambe.ireste.fr (flambe [193.52.81.109]) by mail.ireste.fr (8.9.1a/jtpda-5.3.1) with SMTP id RAA09863 for ; Tue, 10 Jul 2001 17:24:30 +0200 (MET DST) Content-Type: text/plain; charset="iso-8859-1" From: Matthieu Le Corre To: parisc-linux@lists.parisc-linux.org Subject: Re: [parisc-linux] sti console problem Date: Tue, 10 Jul 2001 17:28:34 +0200 References: <01070916084706.01035@flambe.ireste.fr> <01071016061106.03565@flambe.ireste.fr> <20010710154549.G23509@linuxcare.com> In-Reply-To: <20010710154549.G23509@linuxcare.com> MIME-Version: 1.0 Message-Id: <0107101728340D.03565@flambe.ireste.fr> List-ID: Le Mardi 10 Juillet 2001 16:45, vous avez écrit : > On Tue, Jul 10, 2001 at 04:06:11PM +0200, Matthieu Le Corre wrote: > > in fact i've installed the 0.9 iso from the serial console > > first and second stage are correct ! > > it boot correctly , but, > > at the end of booting process , > > in sti console i get an "unable to open initial" console... > > and then a login appears in serial console ! > > in fact all boot message appears un sti console execpt the boot prompt ! > > I have check inittab and /dev/tty* files , they seems ok ! i don't > > understand > > For 0.9 we had different ISOs for 32 bit STI console and 32 bit > serial console. It sounds as though you might have booted > the STI ISO, but used a serial console. You get the login prompt > on the serial console, because that is where inittab starts a > getty. Sounds like kernel printk output is displayed on the STI > console, sugests you are using the STI kernel. Not sure about > this though... Check the kernel boot params; do you have > console=tty0 or console=ttyS0? i've install FROM serial iso BUT i've installed the sti kernel and i've paramater console=tty0 ;( i've made both serial and sti start from inittab .... the sti console seem to work but the only think is i don't get login prompt on sti. but when i shutdown system message appears on sti console ! i've try 0.9.1 but it failed after "branching kernel" despite a good md5sum ... > You can try the 0.9.1 CD from http://mkhppa1.esiee.fr which should > auto-detect which console you used and route messages appropriately. > > > Richard > > > > _______________________________________________ > parisc-linux mailing list > parisc-linux@lists.parisc-linux.org > http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux -- _______________________________________ Matthieu Le Corre Service informatique Ecole Polytechnique de l'Université de Nantes Matthieu.Lecorre@polytech.univ-nantes.fr 02.40.68.32.23 _______________________________________