From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mout1.freenet.de (mout1.freenet.de [194.97.50.132]) by dsl2.external.hp.com (Postfix) with ESMTP id 456A4482A for ; Sun, 15 Jul 2001 03:41:28 -0600 (MDT) Content-Type: text/plain; charset="iso-8859-1" From: Reinhard Gimbel Reply-To: Reinhard.Gimbel@freenet.de To: parisc-linux@lists.parisc-linux.org Date: Sun, 15 Jul 2001 11:26:46 +0200 Cc: okraus@t-online.de MIME-Version: 1.0 Message-Id: <01071511264600.00948@octopus> Subject: [parisc-linux] palinux-0.9.2: Installation fails on C180 List-ID: Hi folks ! Recently I bought an C180 at a local 2nd hand computer store. I tried to install the latest palinux-0.9.2 (esiee.fr), but the installation failed :-( The download itself went ok (md5sums ok), no probs while burning the ISO image (using xcdrgtk). The C180 boots from the CD-R, the system can be set up (HD partitioning, creating the ext2 filesystems, etc.) but during heavy traffic on the SESCSI bus the system crashes (sometime during kernel installation, sometimes during base system installation). I double-checked the hardware (cables, termination, also replaced the CD-R drive by another one). In the log file (minicom log from my Intel-Linux box) I could find the following lines which may be could give a hint what's going on (or even not ...). Furthermre you can find the postmorted registerdump: [...] Dino version 2.1 (bridge mode) found at 0xf2000000 The GSCtoPCI (Dino hrev 1) bus converter found may exhibit data corruption. See Service Note Numbers: A4190A-01, A4191A-01. Systems shipped after Aug 20, 1997 will not exhibit this problem. Models affected: C180, C160, C160L, B160L, and B132L workstations. dino_bridge_init: IO_ADDR_EN hasn't been configured. kernel BUG at dino.c:808! [...] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00000000000001101111100100001110 r0-3 00000000 102b2810 101c97cc 1f7a3a00 r4-7 1f7a3a28 00000006 00000000 00000000 r8-11 1f7a2000 000000ff 1fe02a74 00000200 r12-15 102b2810 00000001 00000400 1f584688 r16-19 1f584588 00000000 00000000 dae998dc r20-23 00000008 1e1fc500 00000000 0000000f r24-27 00000000 00000006 1f7a2000 1028a010 r28-31 00000000 00000400 1f584dc0 101bd938 sr0-3 00000000 000000b5 00000000 000000b5 sr4-7 00000000 00000000 00000000 00000000 IASQ: 00000000 00000000 IAOQ: 101d3004 101d3008 IIR: 0e641288 ISR: 00000000 IOR: dae998e0 ORIG_R28: 1073e740 [...] I do not know when my maschine was shipped (as I wrote above it's a used one). Because the STI installation did not lead to any success currently I'm using serial_1 as the boot console. I do not have much knowledge from HP workstations (but some knowledge from older SUN workstations, much VME-bus knowledge [older Motorola-CPUs], much Intel-PC knowledge) Has anybody outthere an idea ? Many thanks in advance for your help ! Reinhard.