From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <01C19DA6.994D3370.svacca@valcom.com> From: Steven Vacca Reply-To: "svacca@valcom.com" To: "LinuxEmbeddedMailList (E-mail)" Subject: RE: mpc860 vs. mpc860T Date: Tue, 15 Jan 2002 09:25:39 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: I did a complete search for CONFIG_8xx_CPU6, and truncated variations, in my mpc8xx-2.2.13 kernel, and could not find it. It doesn't show up as a cfg option either. Even a grep on CONFIG_8xx doesn't show anything resembling that. Could it be in there and accessible in an alternative way? Steven -----Original Message----- From: Wolfgang Denk [SMTP:wd@denx.de] Sent: Tuesday, January 15, 2002 9:01 AM To: svacca@valcom.com Subject: Re: mpc860 vs. mpc860T Dear Steven, in message <01C19DA2.0031A1C0.svacca@valcom.com> you wrote: > > My 860T rev is: duht-duhduh-duuuuuhh: XPC860TZP50B3 :>( > > I guess that means I'll need some workarounds. Right. > My embedded linux kernel is Redhat's mpc8xx-2.2.13, so > maybe porting in some workarounds might not be too painful. > Could I please get access to your workarounds, Magnus? Ummm... the CONFIG_8xx_CPU6 kernel configuation option (workaround for CPU6 Silicon Errata (860 Pre Rev. C et al.)) was already available with 2.2.13 kernels; you may check it RH bothered to include it. If so, just enable it. Hope that helps, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de Lead me not into temptation... I can find it myself. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/