From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Dumaresq Date: Thu, 17 Jan 2008 10:28:50 -0500 Subject: [U-Boot-Users] RM9200 and at49bv642d Message-ID: <01ac01c8591d$a8ea4c30$6e00a8c0@JONATHAN> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi all, I'm new to u-boot and I want to use it on my new custom design RM9200 board. This is the first time we design a board based to an arm9 cpu. I would like to know if this setup is already done or I should start customizing u-boot to get this work ? My configuration is: 2 x SDRAM MT48LC16M16A2 1 x Flash AT49bv642D I'm not 100% sure, but I think we based our desing on the AT91RM9200EK board for the memory interface. SO I would like to start with something that is the nearest of what I need. I see some U-BOOT source based on the 1.2.0 but I'm not sure from what to start. If someone can point me to the right direction ? Regards Jonathan -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20080117/1c538bc5/attachment.htm