Re: [2.4.32 - 2.6.15.4] e1000 - Fix mii interface

["Paul Rolland" <rol@witbe.net>]

[-- Attachment #1: Type: text/plain, Size: 359 bytes --]

Hello,

> Ok, great, I was just wondering since I would have made one if you had
> no plans to do so.

Well, I was just waiting to make sure it was interesting for someone ;)

Here is it, verified with tab and not spaces... but attached as my mailer
is likely to cripple anything I try to inline...

Signed-off-by: Paul Rolland <rol@as2917.net>

Cheers,
Paul

[-- Attachment #2: e1000.patch-2.6.15.4 --]
[-- Type: application/octet-stream, Size: 1507 bytes --]

diff -urN linux-2.6.15.4.orig/drivers/net/e1000/e1000_main.c linux-2.6.15.4/drivers/net/e1000/e1000_main.c
--- linux-2.6.15.4.orig/drivers/net/e1000/e1000_main.c	Fri Feb 10 07:22:48 2006
+++ linux-2.6.15.4/drivers/net/e1000/e1000_main.c	Sun Feb 26 15:04:40 2006
@@ -4153,29 +4153,29 @@
 
 	/* Fiber NICs only allow 1000 gbps Full duplex */
 	if((adapter->hw.media_type == e1000_media_type_fiber) &&
-		spddplx != (SPEED_1000 + DUPLEX_FULL)) {
+		spddplx != (SPEED_1000 + FULL_DUPLEX)) {
 		DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
 		return -EINVAL;
 	}
 
 	switch(spddplx) {
-	case SPEED_10 + DUPLEX_HALF:
+	case SPEED_10 + HALF_DUPLEX:
 		adapter->hw.forced_speed_duplex = e1000_10_half;
 		break;
-	case SPEED_10 + DUPLEX_FULL:
+	case SPEED_10 + FULL_DUPLEX:
 		adapter->hw.forced_speed_duplex = e1000_10_full;
 		break;
-	case SPEED_100 + DUPLEX_HALF:
+	case SPEED_100 + HALF_DUPLEX:
 		adapter->hw.forced_speed_duplex = e1000_100_half;
 		break;
-	case SPEED_100 + DUPLEX_FULL:
+	case SPEED_100 + FULL_DUPLEX:
 		adapter->hw.forced_speed_duplex = e1000_100_full;
 		break;
-	case SPEED_1000 + DUPLEX_FULL:
+	case SPEED_1000 + FULL_DUPLEX:
 		adapter->hw.autoneg = 1;
 		adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
 		break;
-	case SPEED_1000 + DUPLEX_HALF: /* not supported */
+	case SPEED_1000 + HALF_DUPLEX: /* not supported */
 	default:
 		DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
 		return -EINVAL;