RE: [PATCH v1 1/2] power: regulator: replace printf() with pr_err()

["Jaehoon Chung" <jh80.chung@samsung.com>]

> -----Original Message-----
> From: Shree Ramamoorthy <s-ramamoorthy@ti.com>
> Sent: Thursday, December 19, 2024 2:13 AM
>
> Replace printf() with pr_err() because pr_err() has a uniform print format
> and takes into consideration the log levels supported.
>
> Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>

Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

Best Regards,
Jaehoon Chung

> ---
>  drivers/power/regulator/tps65219_regulator.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/power/regulator/tps65219_regulator.c
> b/drivers/power/regulator/tps65219_regulator.c
> index b7124fed0245..4b0fb205909a 100644
> --- a/drivers/power/regulator/tps65219_regulator.c
> +++ b/drivers/power/regulator/tps65219_regulator.c
> @@ -250,7 +250,7 @@ static int tps65219_ldo_probe(struct udevice *dev)
>  	/* idx must be in 1..TPS65219_LDO_NUM */
>  	idx = dev->driver_data;
>  	if (idx < 1 || idx > TPS65219_LDO_NUM) {
> -		printf("Wrong ID for regulator\n");
> +		pr_err("Wrong ID for regulator\n");
>  		return -EINVAL;
>  	}
>
> @@ -271,7 +271,7 @@ static int tps65219_buck_probe(struct udevice *dev)
>  	/* idx must be in 1..TPS65219_BUCK_NUM */
>  	idx = dev->driver_data;
>  	if (idx < 1 || idx > TPS65219_BUCK_NUM) {
> -		printf("Wrong ID for regulator\n");
> +		pr_err("Wrong ID for regulator\n");
>  		return -EINVAL;
>  	}
>
> --
> 2.34.1