Supermicro X7SPA-HF: in4 ALARM

From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Justin Piszcz" Date: Fri, 06 Apr 2012 20:08:12 +0000 Subject: [lm-sensors] Supermicro X7SPA-HF: in4 ALARM Message-Id: <01fa01cd1430$fed0b990$fc722cb0$@lucidpixels.com> MIME-Version: 1 Content-Type: multipart/mixed; boundary="===============4411141417684173628==" List-Id: To: lm-sensors@vger.kernel.org This is a multipart message in MIME format. --===============4411141417684173628== Content-Type: multipart/alternative; boundary="----=_NextPart_000_01FB_01CD140F.77BF67B0" Content-language: en-us This is a multipart message in MIME format. ------=_NextPart_000_01FB_01CD140F.77BF67B0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, Was curious why the max voltage does not show up properly for in4 = (VDIMM) for this X7SPA-HF using lm sensors 3.3.1 or 3.3.2? On the sensor reading page for IPMI: VDIMM Normal 1.84 Volts This is with lm_sensors: -- $ sensors w83627dhg-isa-0ca0 Adapter: ISA adapter Vcore: +1.16 V (min =3D +0.72 V, max =3D +1.39 V) Vnbcore: +1.04 V (min =3D +0.94 V, max =3D +1.16 V) AVCC: +3.34 V (min =3D +2.98 V, max =3D +3.63 V) +3.3V: +3.34 V (min =3D +2.98 V, max =3D +3.63 V) VDIMM: +1.84 V (min =3D +1.62 V, max =3D +0.00 V) ALARM +5V: +1.25 V (min =3D +1.13 V, max =3D +1.38 V) +12V: +0.75 V (min =3D +0.67 V, max =3D +0.83 V) 3VSB: +3.30 V (min =3D +2.98 V, max =3D +3.63 V) Vbat: +3.06 V (min =3D +2.70 V, max =3D +3.30 V) SYS Temp: +42.0=B0C (high =3D +75.0=B0C, hyst =3D +70.0=B0C) = sensor =3D thermistor CPU Temp: +40.5=B0C (high =3D +90.0=B0C, hyst =3D +87.0=B0C) = sensor =3D diode Case Temp: +24.0=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) = sensor =3D diode $ sensors --version sensors version 3.3.1 with libsensors version 3.3.1 lm_sensors-3.3.2$ prog/sensors/sensors --version sensors version 3.3.2 with libsensors version 3.3.1 w83627dhg-isa-0ca0 Adapter: ISA adapter Vcore: +1.16 V (min =3D +0.72 V, max =3D +1.39 V) Vnbcore: +1.04 V (min =3D +0.94 V, max =3D +1.16 V) AVCC: +3.34 V (min =3D +2.98 V, max =3D +3.63 V) +3.3V: +3.34 V (min =3D +2.98 V, max =3D +3.63 V) VDIMM: +1.84 V (min =3D +1.62 V, max =3D +0.00 V) ALARM +5V: +1.25 V (min =3D +1.13 V, max =3D +1.38 V) +12V: +0.75 V (min =3D +0.67 V, max =3D +0.83 V) 3VSB: +3.30 V (min =3D +2.98 V, max =3D +3.63 V) Vbat: +3.06 V (min =3D +2.70 V, max =3D +3.30 V) SYS Temp: +42.0=B0C (high =3D +75.0=B0C, hyst =3D +70.0=B0C) = sensor =3D thermistor CPU Temp: +40.5=B0C (high =3D +90.0=B0C, hyst =3D +87.0=B0C) = sensor =3D CPU diode Case Temp: +24.5=B0C (high =3D +80.0=B0C, hyst =3D +75.0=B0C) = sensor =3D CPU diode -- I also tried hardcoding in4_{min,max}: $ cat /etc/sensors3.conf chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*" label in0 "Vcore" label in1 "Vnbcore" label in2 "AVCC" label in3 "+3.3V" label in4 "VDIMM" label in5 "+5V" label in6 "+12V" label in7 "3VSB" label in8 "Vbat" label temp1 "SYS Temp" label temp2 "CPU Temp" label temp3 "Case Temp" set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 3.3 * 0.90 set in3_max 3.3 * 1.10 # = http://lists.lm-sensors.org/pipermail/lm-sensors/2010-November/030368.htm= l set in4_min 1.62 set in4_max 1.98 set in7_min 3.3 * 0.90 set in7_max 3.3 * 1.10 set in8_min 3.0 * 0.90 set in8_max 3.0 * 1.10 ignore fan1 ignore fan2 ignore fan3 ignore fan4 ignore fan5 ignore cpu0_vid ignore intrusion0 Justin. ------=_NextPart_000_01FB_01CD140F.77BF67B0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Supermicro X7SPA-HF: in4 ALARM

Hello,

Was curious = why the max voltage does not show up properly for in4 = (VDIMM) for = this X7SPA-HF using lm sensors 3.3.1 or 3.3.2?

On the sensor = reading page for IPMI:

VDIMM Normal 1.84 = Volts

This is with = lm_sensors:

$ = sensors

w83627dhg-isa-0ca0

Adapter: ISA = adapter

Vcore: +1.16 = V (min =3D +0.72 V, max =3D +1.39 V)

Vnbcore: +1.04 V = (min =3D +0.94 V, max =3D +1.16 V)

AVCC: = +3.34 V (min =3D +2.98 V, max =3D +3.63 = V)

+3.3V: +3.34 = V (min =3D +2.98 V, max =3D +3.63 V)

VDIMM: +1.84 = V (min =3D +1.62 V, max =3D +0.00 V) = ALARM

+5V: &nbs= p; +1.25 V (min =3D +1.13 V, max =3D +1.38 = V)

+12V: = +0.75 V (min =3D +0.67 V, max =3D +0.83 = V)

3VSB: = +3.30 V (min =3D +2.98 V, max =3D +3.63 = V)

Vbat: = +3.06 V (min =3D +2.70 V, max =3D +3.30 = V)

SYS = Temp: +42.0=B0C (high =3D +75.0=B0C, hyst = =3D +70.0=B0C) sensor =3D thermistor

CPU = Temp: +40.5=B0C (high =3D +90.0=B0C, hyst = =3D +87.0=B0C) sensor =3D diode

Case = Temp: +24.0=B0C (high =3D +80.0=B0C, hyst =3D = +75.0=B0C) sensor =3D diode

$ sensors = --version

sensors version = 3.3.1 with libsensors version 3.3.1

lm_sensors-3.3.2$ prog/sensors/sensors = --version

sensors version = 3.3.2 with libsensors version 3.3.1

w83627dhg-isa-0ca0

Adapter: ISA = adapter

Vcore: +1.16 = V (min =3D +0.72 V, max =3D +1.39 V)

Vnbcore: +1.04 V = (min =3D +0.94 V, max =3D +1.16 V)

AVCC: = +3.34 V (min =3D +2.98 V, max =3D +3.63 = V)

+3.3V: +3.34 = V (min =3D +2.98 V, max =3D +3.63 V)

VDIMM: +1.84 = V (min =3D +1.62 V, max =3D +0.00 V) = ALARM

+5V: &nbs= p; +1.25 V (min =3D +1.13 V, max =3D +1.38 = V)

+12V: = +0.75 V (min =3D +0.67 V, max =3D +0.83 = V)

3VSB: = +3.30 V (min =3D +2.98 V, max =3D +3.63 = V)

Vbat: = +3.06 V (min =3D +2.70 V, max =3D +3.30 = V)

SYS = Temp: +42.0=B0C (high =3D +75.0=B0C, hyst = =3D +70.0=B0C) sensor =3D thermistor

CPU = Temp: +40.5=B0C (high =3D +90.0=B0C, hyst = =3D +87.0=B0C) sensor =3D CPU diode

Case = Temp: +24.5=B0C (high =3D +80.0=B0C, hyst =3D = +75.0=B0C) sensor =3D CPU diode

I also tried = hardcoding in4_{min,max}:

$ cat /etc/sensors3.conf

chip = "w83627ehf-*" "w83627dhg-*" "w83667hg-*" = "nct6775-*" "nct6776-*"

label in0 = "Vcore"

label in1 = "Vnbcore"

label in2 = "AVCC"

label in3 = "+3.3V"

label in4 = "VDIMM"

label in5 = "+5V"

label in6 = "+12V"

label in7 = "3VSB"

label in8 = "Vbat"

label temp1 "SYS = Temp"

label temp2 "CPU = Temp"

label temp3 "Case = Temp"

set in2_min 3.3 * = 0.90

set in2_max 3.3 * = 1.10

set in3_min 3.3 * = 0.90

set in3_max 3.3 * = 1.10

# http://lists.lm-sensors.org/pipermail/lm-sensors/2010-November= /030368.html

set in4_min = 1.62

set in4_max = 1.98

set in7_min 3.3 * = 0.90

set in7_max 3.3 * = 1.10

set in8_min 3.0 * = 0.90

set in8_max 3.0 * = 1.10

ignore fan1

ignore fan2

ignore fan3

ignore fan4

ignore fan5

ignore cpu0_vid

ignore intrusion0

Justin.

------=_NextPart_000_01FB_01CD140F.77BF67B0-- --===============4411141417684173628== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors --===============4411141417684173628==--