Re: [yocto-rocko] : fsl-community-bsp X11 build touch screen calibration issue on iMX6UL

["Alankar Dhobale" <alankar.dhobale@renuelectronics.com>]

[-- Attachment #1: Type: text/plain, Size: 1674 bytes --]

Hi Max,

 

Yes you are right, I used the same bbappend and this resolved the issue, perfect solution…

 

I have been struggling with this since couple of days! 

 

Many thanks for your inputs and resolution.

 

I have tested the build for imx6ulevk as well as to our own machine, both worked well. Calibration passes correctly and also writes it to /etc/pointercal.xinput file and works perfect

 

Thanks once again…

 

Regards

Alankar

 

 

-----Original Message-----
From: Max Krummenacher [mailto:max.oss.09@gmail.com] 
Sent: 04/12/2018 1:08 AM
To: Alankar Dhobale; yocto@yoctoproject.org
Subject: Re: [yocto] [yocto-rocko] : fsl-community-bsp X11 build touch screen calibration issue on iMX6UL

 

Hi

 

> Machine: imx6ulevek

> 

> Image: core-image-x11

> 

> The issue I have observed on the device is, Xorg is unable to 

> calibrate the touchscreen, I don't know what has changed but it is 

> unable to calibrate, below is the log I get on prompt

> 

...

> ERROR: XorgPrint Calibrator does not support the supplied 

> --output-type

> 

> Error: unable to apply or save configuration valuesUsing calibration 

> data stored in /etc/pointercal.xinput

> 

 

Does not installing xf86-input-libinput help? xinput-calibrator cannot cope with that input backend.

 

I used the following bbappend to achieve this:

 

 <http://git.toradex.com/cgit/meta-toradex-demos.git/commit/?h=rocko-next&id=664a1926af81e49396bfe2681> http://git.toradex.com/cgit/meta-toradex-demos.git/commit/?h=rocko-next&id=664a1926af81e49396bfe2681

18969ec2b8718cb

 

Regards

Max


[-- Attachment #2: Type: text/html, Size: 5216 bytes --]