From: "\"Beerse, Corné\"" <c.beerse@torex-hiscom.nl>
To: "'Stephen J de Vries'" <paulhill20@juno.com>,
parisc-linux@lists.parisc-linux.org
Subject: RE: [parisc-linux] hardware newbie question...
Date: Wed, 25 Sep 2002 16:02:31 +0200 [thread overview]
Message-ID: <02Sep25.161413cest.119074@ns.hiscom.nl> (raw)
[-- Attachment #1: Type: text/plain, Size: 1929 bytes --]
> -----Original Message-----
> From: Stephen J de Vries [mailto:paulhill20@juno.com]
> I have a HP 712 that I'd purchased recently.
>
>
> Can I use a PC monitor, keyboard, and mouse to boot the thing
> up? If so,
> does the monitor have to be a multisync or something special?
I've had a 712 (running HP-UX 10.20) with a multisync monitor (compaq,
before the merger) running verry well.
As I recal, the monitor should do a sync-on-green. If you don't get a proper
picture and have a monitor-cable connection with bnc connectors, try putting
the cable-sync on the monitor-green. This should give a sharp (bad collored)
picture.
For the mouse, the HP mouse that came with the device looks verry much like
a logitech mouse with a black logitech icon. 2 exceptions: the labels differ
and the logitech has a shorter cable. The same logitech with a colored icon
on top does not work. The mouse must be a native ps/2 mouse, not one that
can do serial-mousing too.
For the keyboard: try and see what you get. No experiences with alternates
here. As with the mouse, the keyboard must be native ps/2 since it does not
get any initialize command. An easy test here is that if the bootloader
finds a keyboard, it wil use that keyboard and the video-card for
bootconsole. If the keyboard is not found, the serial-port (9600-8-N) is
used for console.
>
> In addition, HP-UX is on the hard drive but is locked down. I was
> thinking of buying an external CD drive and attempting to load debian
> 0.93. Can anyone recommend a place to buy the CD drive that they have
Any scsi cd-rom that can do a 2K blocksize will do for booting. After boot,
there is no difference. HP-s are relabeled Toshiba's.
> dealt with? I also have a network so I could attempt a
> network install
> but I am not sure what minimum requirements I'd need to
> fulfill for that.
> Is my approach the right one?
It's one right one, out of manny...
CBee
[-- Attachment #2: Type: text/html, Size: 3017 bytes --]
next reply other threads:[~2002-09-25 14:02 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-25 14:02 "Beerse, Corné" [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-09-25 13:09 [parisc-linux] hardware newbie question Stephen J de Vries
2002-09-25 13:34 ` Thibaut VARENE
2002-09-25 14:00 ` Andreas Deresch
2002-09-30 22:31 ` Derek Engelhaupt
2002-10-01 10:00 ` Harri Haataja
2002-10-01 10:47 ` Thibaut VARENE
2002-09-25 15:44 ` kenneth westelinck
2002-09-30 22:29 ` Derek Engelhaupt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=02Sep25.161413cest.119074@ns.hiscom.nl \
--to=c.beerse@torex-hiscom.nl \
--cc=parisc-linux@lists.parisc-linux.org \
--cc=paulhill20@juno.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.