From: PeterYin <peteryin.openbmc@gmail.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v9 1/2] ARM: dts: aspeed: Minerva: Add Facebook Minerva (AST2600) BMC
Date: Wed, 4 Oct 2023 09:46:03 +0800 [thread overview]
Message-ID: <02b596d2-c169-899b-bcba-5aff2dbd5113@gmail.com> (raw)
In-Reply-To: <20230907064514.1764010-2-peteryin.openbmc@gmail.com>
On 9/7/23 14:45, Peter Yin wrote:
> Add linux device tree entry related to Minerva
> specific devices connected to BMC SoC.
>
> Signed-off-by: Peter Yin<peteryin.openbmc@gmail.com>
> ---
> arch/arm/boot/dts/aspeed/Makefile | 1 +
> .../aspeed/aspeed-bmc-facebook-minerva.dts | 371 ++++++++++++++++++
> 2 files changed, 372 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
>
> diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
> index 23cbc7203a8e..b1da302dbcd6 100644
> --- a/arch/arm/boot/dts/aspeed/Makefile
> +++ b/arch/arm/boot/dts/aspeed/Makefile
> @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-facebook-fuji.dtb \
> aspeed-bmc-facebook-galaxy100.dtb \
> aspeed-bmc-facebook-greatlakes.dtb \
> + aspeed-bmc-facebook-minerva.dtb \
> aspeed-bmc-facebook-minipack.dtb \
> aspeed-bmc-facebook-tiogapass.dtb \
> aspeed-bmc-facebook-wedge40.dtb \
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
> new file mode 100644
> index 000000000000..4834473c3c39
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
> @@ -0,0 +1,371 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright (c) 2023 Facebook Inc.
> +/dts-v1/;
> +
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
> +
> +/ {
> + model = "Facebook Minerva";
> + compatible = "facebook,minerva-bmc", "aspeed,ast2600";
> +
> + aliases {
> + serial0 = &uart1;
> + serial4 = &uart5;
> + };
> +
> + chosen {
> + stdout-path = &uart5;
> + };
> +
> + memory at 80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x80000000>;
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
> + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
> + <&adc1 2>;
> + };
> +};
> +
> +// HOST BIOS Debug
> +&uart1 {
> + status = "okay";
> +};
> +
> +// SOL Host Console
> +&uart2 {
> + status = "okay";
> + pinctrl-0 = <>;
> +};
> +
> +// SOL BMC Console
> +&uart4 {
> + status = "okay";
> + pinctrl-0 = <>;
> +};
> +
> +// BMC Debug Console
> +&uart5 {
> + status = "okay";
> +};
> +
> +// MTIA
> +&uart6 {
> + status = "okay";
> +};
> +
> +&uart_routing {
> + status = "okay";
> +};
> +
> +&vuart1 {
> + status = "okay";
> + virtual;
> + port=<0x3e8>;
> + sirq = <7>;
> + sirq-polarity = <0>;
> + dma-mode;
> + dma-channel = <12>;
> +};
> +
> +&wdt1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdtrst1_default>;
> + aspeed,reset-type = "soc";
> + aspeed,external-signal;
> + aspeed,ext-push-pull;
> + aspeed,ext-active-high;
> + aspeed,ext-pulse-duration = <256>;
> +};
> +
> +&mac3 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii4_default>;
> + no-hw-checksum;
> + use-ncsi;
> + ncsi-ctrl,start-redo-probe;
> + ncsi-ctrl,no-channel-monitor;
> + mlx,multi-host;
> + ncsi-package = <1>;
> + ncsi-channel = <1>;
> + ncsi-rexmit = <1>;
> + ncsi-timeout = <2>;
> +};
> +
> +&rtc {
> + status = "okay";
> +};
> +
> +&fmc {
> + status = "okay";
> +
> + flash at 0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout-128.dtsi"
> + };
> +
> + flash at 1 {
> + status = "okay";
> + m25p,fast-read;
> + label = "alt-bmc";
> + spi-max-frequency = <50000000>;
> + };
> +};
> +
> +// BIOS Flash
> +&spi2 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi2_default>;
> +
> + flash at 0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "pnor";
> + spi-max-frequency = <12000000>;
> + spi-tx-bus-width = <2>;
> + spi-rx-bus-width = <2>;
> + };
> +};
> +
> +&kcs2 {
> + status = "okay";
> + aspeed,lpc-io-reg = <0xca8>;
> +};
> +
> +&kcs3 {
> + status = "okay";
> + aspeed,lpc-io-reg = <0xca2>;
> +};
> +
> +&lpc_snoop {
> + status = "okay";
> + snoop-ports = <0x80>;
> +};
> +
> +&peci0 {
> + status = "okay";
> + clock-frequency = <1000000>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + tmp75 at 4B {
> + compatible = "ti,tmp75";
> + reg = <0x4B>;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +};
> +
> +&i2c3 {
> + status = "okay";
> +};
> +
> +&i2c4 {
> + status = "okay";
> +};
> +
> +&i2c5 {
> + status = "okay";
> +};
> +
> +&i2c6 {
> + status = "okay";
> +};
> +
> +&i2c7 {
> + status = "okay";
> +};
> +
> +&i2c8 {
> + status = "okay";
> +};
> +
> +&i2c9 {
> + status = "okay";
> +};
> +
> +&i2c11 {
> + status = "okay";
> +};
> +
> +&i2c12 {
> + status = "okay";
> +};
> +
> +&i2c13 {
> + status = "okay";
> +};
> +
> +// To Debug card
> +&i2c14 {
> + status = "okay";
> + multi-master;
> +
> + ipmb at 10 {
> + compatible = "ipmb-dev";
> + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
> + i2c-protocol;
> + };
> +};
> +
> +&i2c15 {
> + status = "okay";
> +
> + // SCM FRU
> + eeprom at 50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> + // BSM FRU
> + eeprom at 56 {
> + compatible = "atmel,24c64";
> + reg = <0x56>;
> + };
> +};
> +
> +&adc0 {
> + ref_voltage = <2500>;
> + status = "okay";
> + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> + &pinctrl_adc2_default &pinctrl_adc3_default
> + &pinctrl_adc4_default &pinctrl_adc5_default
> + &pinctrl_adc6_default &pinctrl_adc7_default>;
> +};
> +
> +&adc1 {
> + ref_voltage = <2500>;
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc10_default>;
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&gpio0 {
> + pinctrl-names = "default";
> + gpio-line-names =
> + /*A0-A7*/ "","","","","","","","",
> + /*B0-B7*/ "","","","","","FM_ID_LED_N","","",
> + /*C0-C7*/ "","","","","","","","",
> + /*D0-D7*/ "","","SOL_UART_SET","","","","","",
> + /*E0-E7*/ "","","","","","","","",
> + /*F0-F7*/ "","","","","","","","",
> + /*G0-G7*/ "","","","","","","","",
> + /*H0-H7*/ "","","","","","","","",
> + /*I0-I7*/ "","","","","","","","",
> + /*J0-J7*/ "","","","","","","","",
> + /*K0-K7*/ "","","","","","","","",
> + /*L0-L7*/ "","","","","","","","",
> + /*M0-M7*/ "","","","","","","","",
> + /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1",
> + "LED_POSTCODE_2","LED_POSTCODE_3",
> + "LED_POSTCODE_4","LED_POSTCODE_5",
> + "LED_POSTCODE_6","LED_POSTCODE_7",
> + /*O0-O7*/ "","","","","","","","",
> + /*P0-P7*/ "FP_SYS_PWRBTN_IN_N","BMC_SYS_PWRBTN_OUT_N",
> + "FP_RST_BTN_IN_N","","","","","",
> + /*Q0-Q7*/ "","","","","","","","",
> + /*R0-R7*/ "","","","","","","","",
> + /*S0-S7*/ "","","","","","","","",
> + /*T0-T7*/ "","","","","","","","",
> + /*U0-U7*/ "","","","","","","","",
> + /*V0-V7*/ "","","","","","","","",
> + /*W0-W7*/ "","","","","","","","",
> + /*X0-X7*/ "","","","","","","","",
> + /*Y0-Y7*/ "","","","","","","","",
> + /*Z0-Z7*/ "","","","","","","","";
> +};
> +
> +&sgpiom0 {
> + status = "okay";
> + max-ngpios = <128>;
> + ngpios = <128>;
> + bus-frequency = <2000000>;
> + gpio-line-names =
> + /*in - out - in - out */
> + /*A0-A3 line 0-7*/
> + "","","","","","ENABLE_SENSORS","","",
> + /*A4-A7 line 8-15*/
> + "","","","","","","","",
> + /*B0-B3 line 16-23*/
> + "","","","","","BMC_RST_BTN_OUT_N","","",
> + /*B4-B7 line 24-31*/
> + "","","","","","","","",
> + /*C0-C3 line 32-39*/
> + "","","","","","","","",
> + /*C4-C7 line 40-47*/
> + "","","","","","","","",
> + /*D0-D3 line 48-55*/
> + "","","","","","","","",
> + /*D4-D7 line 56-63*/
> + "","","","","","","","",
> + /*E0-E3 line 64-71*/
> + "","","","","","","","",
> + /*E4-E7 line 72-79*/
> + "","","","","","","","",
> + /*F0-F3 line 80-87*/
> + "","","","","","","","",
> + /*F4-F7 line 88-95*/
> + "","","","","","","","",
> + /*G0-G3 line 96-103*/
> + "","","","","","","","",
> + /*G4-G7 line 104-111*/
> + "","","","","","","","",
> + /*H0-H3 line 112-119*/
> + "","","","","PLD_SYS_POWER_GOOD","","","",
> + /*H4-H7 line 120-127*/
> + "","","","","","","","",
> + /*I0-I3 line 128-135*/
> + "","","","","","","","",
> + /*I4-I7 line 136-143*/
> + "","","","","","","","",
> + /*J0-J3 line 144-151*/
> + "","","PLD_BIOS_POST_CMPLT_N","","","","","",
> + /*J4-J7 line 152-159*/
> + "","","","","","","","",
> + /*K0-K3 line 160-167*/
> + "","","","","","","","",
> + /*K4-K7 line 168-175*/
> + "","","","","","","","",
> + /*L0-L3 line 176-183*/
> + "","","","","","","","",
> + /*L4-L7 line 184-191*/
> + "","","","","","","","",
> + /*M0-M3 line 192-199*/
> + "","","","","","","","",
> + /*M4-M7 line 200-207*/
> + "","","","","","","","",
> + /*N0-N3 line 208-215*/
> + "","","","","","","","",
> + /*N4-N7 line 216-223*/
> + "","","","","","","","",
> + /*O0-O3 line 224-231*/
> + "","","","","","","","",
> + /*O4-O7 line 232-239*/
> + "","","","","","","","",
> + /*P0-P3 line 240-247*/
> + "","","","","","","","",
> + /*P4-P7 line 248-255*/
> + "","","","","","","","";
> +};
Hello Maintainer,
Are there any recommendations or modifications that you consider necessary?
Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linux-aspeed/attachments/20231004/b51e13bd/attachment-0001.htm>
next prev parent reply other threads:[~2023-10-04 1:46 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-07 6:45 [PATCH v9 0/2] Add Facebook Minerva (AST2600) BMC Peter Yin
2023-09-07 6:45 ` Peter Yin
2023-09-07 6:45 ` Peter Yin
2023-09-07 6:45 ` [PATCH v9 1/2] ARM: dts: aspeed: Minerva: " Peter Yin
2023-09-07 6:45 ` Peter Yin
2023-09-07 6:45 ` Peter Yin
2023-10-04 1:46 ` PeterYin [this message]
2023-10-04 2:22 ` PeterYin
2023-10-04 2:22 ` PeterYin
2023-10-04 2:22 ` PeterYin
2023-09-07 6:45 ` [PATCH v9 2/2] dt-bindings: arm: aspeed: add Meta Minerva board Peter Yin
2023-09-07 6:45 ` Peter Yin
2023-09-07 6:45 ` Peter Yin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=02b596d2-c169-899b-bcba-5aff2dbd5113@gmail.com \
--to=peteryin.openbmc@gmail.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.