From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Igaz Tibor" Date: Fri, 19 Oct 2007 07:04:26 +0000 Subject: Re: [lm-sensors] Dell Poweredge SC430 Message-Id: <02b601c8121e$48df4610$9020a8c0@dbrt.hu> List-Id: References: <024001c8116e$a9623700$9020a8c0@dbrt.hu> In-Reply-To: <024001c8116e$a9623700$9020a8c0@dbrt.hu> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Sorry, here are the missing informations. If I can any more information give you, just let me know. OS: Linux (openSUSE 10.3) sensors: sensors-2.10.4-23 (OS package) ---------------------------------------------------------------------------- -------------- sensors-detect output (without the uninportant parts): Probing for PCI bus adapters... Use driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7 We will now try to load each adapter module in turn. Module `i2c-i801' already loaded. ... To continue, we need module `i2c-dev' to be loaded. Do you want to load `i2c-dev' now? (YES/no): Module loaded successfully. ... Next adapter: SMBus I801 adapter at ece0 (i2c-0) Do you want to scan it? (YES/no/selectively): Client found at address 0x44 Probing for `Maxim MAX6633/MAX6634/MAX6635'... No Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Probing for `EDID EEPROM'... No Client found at address 0x52 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Probing for `EDID EEPROM'... No ... Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM78-J' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Probing for `Silicon Integrated Systems SIS5595'... No Probing for `VIA VT82C686 Integrated Sensors'... No Probing for `VIA VT8231 Integrated Sensors'... No Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No ... Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor'... No Trying family `SMSC'... Yes Found `SMSC SCH5504-NS Super IO' (no hardware monitoring capabilities) Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Fintek'... No Trying family `ITE'... No ... Do you want to scan for them? (YES/no): AMD K8 thermal sensors... No Intel Core family thermal sensor... No Intel AMB FB-DIMM thermal sensor... No ... Sorry, no sensors were detected. Either your sensors are not supported, or they are connected to an I2C or SMBus adapter that is not supported. :( ---------------------------------------------------------------------------- ---------------------------- lspci -nn -vv output (without the uninportant parts, like USB, video etc.): 00:00.0 Host bridge [Class 0600]: Intel Corporation E7230/3000/3010 Memory Controller Hub [8086:2778] Subsystem: Dell Unknown device [1028:01ae] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=FAst >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [88] Subsystem: Intel Corporation Unknown device [8086:0000] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=3D0/0 Enable+ Address: fee0300c Data: 4159 Capabilities: [a0] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 2 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 7680, PowerLimit 25.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [100] Virtual Channel Capabilities: [140] Unknown (5) 00:1c.0 PCI bridge [Class 0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 1 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 2, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=3D0/0 Enable+ Address: fee0300c Data: 4161 Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1c.4 PCI bridge [Class 0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 5 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 3, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=3D0/0 Enable+ Address: fee0300c Data: 4169 Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1c.5 PCI bridge [Class 0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 [8086:27e2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 6 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 4, PowerLimit 10.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=3D0/0 Enable+ Address: fee0300c Data: 4171 Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1e.0 PCI bridge [Class 0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- SERR- TAbort- Reset- FastB2B- Capabilities: [50] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000] 00:1f.0 ISA bridge [Class 0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- SERR- TAbort- SERR- TAbort- SERR- -----Original Message----- > From: lm-sensors-bounces@lm-sensors.org=20 > [mailto:lm-sensors-bounces@lm-sensors.org] On Behalf Of Juerg=20 > Haefliger > Sent: Thursday, October 18, 2007 6:21 PM > To: Igaz Tibor > Cc: lm-sensors@lm-sensors.org > Subject: Re: [lm-sensors] Dell Poweredge SC430 >=20 > Hi Igaz, >=20 > You're not providing enough information. Without telling us what > motherboard/chipset/hwmon chips are in this server, we can't help you. > Do you have Linux installed on it? Can you run the latest version of > sensors-detect and post the output along with the output of 'lspci -nn > -vv'? >=20 > ...juerg >=20 >=20 > On 10/18/07, Igaz Tibor wrote: > > Hi! > > > > Is there any chance to monitor a Dell Poweredge SC430 server with > > lm-sensors? > > If it's not possible, is there any other solution to this problem? > > > > Igaz Tibor _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors