Re: [PATCH v2 2/2] remoteproc: qcom: Add support for parsing fw dt bindings

[Sibi Sankar <sibis@codeaurora.org>]

Hi Brian,
Thanks for the review!

On 2019-01-04 05:14, Brian Norris wrote:
> On Fri, Dec 28, 2018 at 10:18:19AM +0530, Sibi Sankar wrote:
>> Add support for parsing "firmware-name" dt bindings which specifies
>> the relative paths of mba/modem/pas image as strings. Fallback to
>> the default paths for mba/modem/pas image on -EINVAL.
>> 
>> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
>> ---
>>  drivers/remoteproc/qcom_q6v5_mss.c | 46 
>> +++++++++++++++++++++++-------
>>  drivers/remoteproc/qcom_q6v5_pas.c | 11 ++++++-
>>  2 files changed, 46 insertions(+), 11 deletions(-)
>> 
>> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c 
>> b/drivers/remoteproc/qcom_q6v5_mss.c
>> index 01be7314e176..c75179006e24 100644
>> --- a/drivers/remoteproc/qcom_q6v5_mss.c
>> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
>> @@ -188,6 +188,7 @@ struct q6v5 {
>>  	bool has_alt_reset;
>>  	int mpss_perm;
>>  	int mba_perm;
>> +	const char *hexagon_mdt_image;
>>  	int version;
>>  };
>> 
>> @@ -860,17 +861,27 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
>>  	phys_addr_t min_addr = PHYS_ADDR_MAX;
>>  	phys_addr_t max_addr = 0;
>>  	bool relocate = false;
>> -	char seg_name[10];
>> +	char *fw_name;
>> +	size_t fw_name_len;
>>  	ssize_t offset;
>>  	size_t size = 0;
>>  	void *ptr;
>>  	int ret;
>>  	int i;
>> 
>> -	ret = request_firmware(&fw, "modem.mdt", qproc->dev);
>> +	fw_name_len = strlen(qproc->hexagon_mdt_image);
>> +	if (fw_name_len <= 4)
>> +		return -EINVAL;
>> +
>> +	fw_name = kstrdup(qproc->hexagon_mdt_image, GFP_KERNEL);
>> +	if (!fw_name)
>> +		return -ENOMEM;
>> +
>> +	ret = request_firmware(&fw, qproc->hexagon_mdt_image, qproc->dev);
>>  	if (ret < 0) {
>> -		dev_err(qproc->dev, "unable to load modem.mdt\n");
>> -		return ret;
>> +		dev_err(qproc->dev, "unable to load %s\n",
>> +			qproc->hexagon_mdt_image);
>> +		goto out;
>>  	}
>> 
>>  	/* Initialize the RMB validator */
>> @@ -918,10 +929,12 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
>>  		ptr = qproc->mpss_region + offset;
>> 
>>  		if (phdr->p_filesz) {
>> -			snprintf(seg_name, sizeof(seg_name), "modem.b%02d", i);
>> -			ret = request_firmware(&seg_fw, seg_name, qproc->dev);
>> +			snprintf(fw_name + fw_name_len - 3, fw_name_len,
>> +				 "b%02d", i);
> 
> So, you're assuming that 'fw_name' ends in '.XXX' (for some 3-char 
> value
> of 'XXX')? Seems a bit odd. But if you really want this, it feels like
> you should enforce this, and either comment on what you're doing or 
> else
> use a proper computation that makes it clear (e.g., strlen("bin")).
> 
> Brian

we want to construct the names of the fw blobs
incrementally i.e xxx.xxx to xxx.bxx. Given
that we restrict the fw_name_len to be greater
than 4 at the beginning, I'll probably do
something like this.

/* Replace "xxx.xxx" with "xxx.bxx" */
sprintf(fw_name + fw_name_len - 3, "b%02d", i);

> 
>> +			ret = request_firmware(&seg_fw, fw_name, qproc->dev);
>>  			if (ret) {
>> -				dev_err(qproc->dev, "failed to load %s\n", seg_name);
>> +				dev_err(qproc->dev, "failed to load %s\n",
>> +					fw_name);
>>  				goto release_firmware;
>>  			}
>> 
>> @@ -960,6 +973,8 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
>> 
>>  release_firmware:
>>  	release_firmware(fw);
>> +out:
>> +	kfree(fw_name);
>> 
>>  	return ret < 0 ? ret : 0;
>>  }
>> @@ -1075,9 +1090,10 @@ static int 
>> qcom_q6v5_register_dump_segments(struct rproc *rproc,
>>  	unsigned long i;
>>  	int ret;
>> 
>> -	ret = request_firmware(&fw, "modem.mdt", qproc->dev);
>> +	ret = request_firmware(&fw, qproc->hexagon_mdt_image, qproc->dev);
>>  	if (ret < 0) {
>> -		dev_err(qproc->dev, "unable to load modem.mdt\n");
>> +		dev_err(qproc->dev, "unable to load %s\n",
>> +			qproc->hexagon_mdt_image);
>>  		return ret;
>>  	}
>> 
>> @@ -1253,6 +1269,8 @@ static int q6v5_probe(struct platform_device 
>> *pdev)
>>  	const struct rproc_hexagon_res *desc;
>>  	struct q6v5 *qproc;
>>  	struct rproc *rproc;
>> +	const char *mba_image;
>> +	const char *fw_name[2];
>>  	int ret;
>> 
>>  	desc = of_device_get_match_data(&pdev->dev);
>> @@ -1262,8 +1280,15 @@ static int q6v5_probe(struct platform_device 
>> *pdev)
>>  	if (desc->need_mem_protection && !qcom_scm_is_available())
>>  		return -EPROBE_DEFER;
>> 
>> +	ret = of_property_read_string_array(pdev->dev.of_node, 
>> "firmware-name",
>> +					    fw_name, 2);
>> +	if (ret != -EINVAL && ret != 2)
>> +		return ret > 0 ? -EINVAL : ret;
>> +
>> +	mba_image = (ret != 2) ? desc->hexagon_mba_image : fw_name[0];
>> +
>>  	rproc = rproc_alloc(&pdev->dev, pdev->name, &q6v5_ops,
>> -			    desc->hexagon_mba_image, sizeof(*qproc));
>> +			    mba_image, sizeof(*qproc));
>>  	if (!rproc) {
>>  		dev_err(&pdev->dev, "failed to allocate rproc\n");
>>  		return -ENOMEM;
>> @@ -1272,6 +1297,7 @@ static int q6v5_probe(struct platform_device 
>> *pdev)
>>  	qproc = (struct q6v5 *)rproc->priv;
>>  	qproc->dev = &pdev->dev;
>>  	qproc->rproc = rproc;
>> +	qproc->hexagon_mdt_image = (ret != 2) ? "modem.mdt" : fw_name[1];
>>  	platform_set_drvdata(pdev, qproc);
>> 
>>  	ret = q6v5_init_mem(qproc, pdev);
>> diff --git a/drivers/remoteproc/qcom_q6v5_pas.c 
>> b/drivers/remoteproc/qcom_q6v5_pas.c
>> index b1e63fcd5fdf..141c7da29e9a 100644
>> --- a/drivers/remoteproc/qcom_q6v5_pas.c
>> +++ b/drivers/remoteproc/qcom_q6v5_pas.c
>> @@ -258,6 +258,8 @@ static int adsp_probe(struct platform_device 
>> *pdev)
>>  	const struct adsp_data *desc;
>>  	struct qcom_adsp *adsp;
>>  	struct rproc *rproc;
>> +	const char *fw_name;
>> +	const char *of_fw_name;
>>  	int ret;
>> 
>>  	desc = of_device_get_match_data(&pdev->dev);
>> @@ -267,8 +269,15 @@ static int adsp_probe(struct platform_device 
>> *pdev)
>>  	if (!qcom_scm_is_available())
>>  		return -EPROBE_DEFER;
>> 
>> +	ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
>> +				      &of_fw_name);
>> +	if (ret && ret != -EINVAL)
>> +		return ret;
>> +
>> +	fw_name = ret ? desc->firmware_name : of_fw_name;
>> +
>>  	rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_ops,
>> -			    desc->firmware_name, sizeof(*adsp));
>> +			    fw_name, sizeof(*adsp));
>>  	if (!rproc) {
>>  		dev_err(&pdev->dev, "unable to allocate remoteproc\n");
>>  		return -ENOMEM;
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
>> Forum,
>> a Linux Foundation Collaborative Project
>> 

-- 
-- Sibi Sankar --
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.