Re: PCI device mapping to socket

["François-Frédéric Ozog" <ff-SpBG2i6TTxU@public.gmane.org>]

Hi,

It depends on the kernel version. For the latests ones you can use:
cat /sys/class/net/<interface name>/device/numa_node

in all other case, you can use lspci fallback (in case even no driver is yet
loaded).

lspci | grep Ethernet
09:00.2 Ethernet controller: Intel Corporation I350 Gigabit Network
Connection (rev 01)
09:00.3 Ethernet controller: Intel Corporation I350 Gigabit Network
Connection (rev 01)

lspci -t
\-[0000:00]-+-00.0
             +-01.0-[01-03]----00.0-[02-03]----08.0-[03]--+-00.0
             |                                            +-00.3
             .
             .
             +-1c.0-[09-0a]--+-00.0
             |               +-00.1
             |               +-00.2
             |               \-00.3

So the PCI bus is 0.

Now transform this to socket number:

Space=0x100/<nbsocket>

On a dual socket space=0x80, bus(0*space=0) is socket 0, bus(1*space=0x80)
is socket1.

On a quad socket space=0x40, bus(0*space=0) is socket 0, bus(1*space=0x40)
is socket1, bus(2*space=0x80) is socket2, bus(3*space=0xc0) is socket3 .

François-Frédéric


> -----Message d'origine-----
> De : dev [mailto:dev-bounces-VfR2kkLFssw@public.gmane.org] De la part de Benson, Bryan
> Envoyé : mercredi 18 décembre 2013 21:20
> À : dev-VfR2kkLFssw@public.gmane.org
> Objet : [dpdk-dev] PCI device mapping to socket
> 
> All,
> Does anyone know of a way I can find out which socket a PCI device/bridge
> is tied up to?  I have looked into dmidecode and lspci to no avail, but I
> may be missing something.  We are looking at putting multiple NICs into a
> single dual socket server.
> 
> This is so that I can tie specific NIC ports to the proper socket to take
> advantage of DDIO.
> 
> Thank you,
> Bryan Benson
> Amazon Web Services