All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael S.Zick <mszick@goquest.com>
To: Eric Huiban <grompf@grompf.net>, parisc-linux@lists.parisc-linux.org
Subject: Re: [parisc-linux] Serial port problem.
Date: Mon, 16 Jun 2003 06:58:33 -0500	[thread overview]
Message-ID: <03061606583300.00942@wolf686> (raw)
In-Reply-To: <E19RXnb-0000LH-00@tyrann>

On Sunday 15 June 2003 08:43 am, Eric Huiban wrote:
> Hi all,
>
> I just need to install an 'old' modem (USR Sportster V34) on a freshly
> installed HP 9000/730. Using minicom i only managed to communicate
> with the modem up to 19200bps. I'm using ttyS0 as backup console port and
> ttyS1 as modem port.
>
> here is the content of my serial.conf generated during the debian
> installation :
>
> ###PORT STATE GENERATED USING AUTOSAVE-ONCE###
> ###AUTOSAVE-ONCE###
> ###AUTOSAVE###
> #
> [snip : comments]
> /dev/ttyS0 uart 16550A port 0x0000 irq 90 baud_base 454545 spd_vhi
> /dev/ttyS1 uart 16550A port 0x0000 irq 89 baud_base 454545 spd_vhi
>
> Is there something specific to the HP 9000 computers , or just a little
> something i missed somewhere ?
>
Such as a UART speed limit?
Depends on the model, but on some older machines, 19200 is all you get.
Subject has come up on the mailing list before; info should be in the
ML archives.

Mike
>
> Thant you all !
>
> Eric Huiban, aka Grompf.
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

      reply	other threads:[~2003-06-16 12:07 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-06-15 13:43 [parisc-linux] Serial port problem Eric Huiban
2003-06-16 11:58 ` Michael S.Zick [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=03061606583300.00942@wolf686 \
    --to=mszick@goquest.com \
    --cc=grompf@grompf.net \
    --cc=parisc-linux@lists.parisc-linux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.