From mboxrd@z Thu Jan 1 00:00:00 1970 From: john@scl.co.uk (John Sutton) Date: Thu, 19 May 2005 06:24:10 +0000 Subject: Linux on GA-8LD533(-P) Message-Id: <03080608403600.10057@diva.localdomain> List-Id: References: <03080518254600.09450@diva.localdomain> In-Reply-To: <03080518254600.09450@diva.localdomain> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Thanks for that Jean. I'll go ahead and buy the kit and see what happens... On Tue, 05 Aug 2003, Jean Delvare wrote: > > On the lm_sensors web site http://www2.lm-sensors.nu/~lm78/index.html > > support for the particular SMBus controller (implemented in the > > 82801DB chip) is mentioned but the sensor chip itself (implemented in > > the IT8702F) is not mentioned - only the IT8705 and IT8712. And the > > IT8707 and IT8708 are mentioned as being definitely NOT supported at > > present. So is the 8702 in this m/b like the 8705/8712 (i.e., > > supported) or like the 8707/8708(unsupported)? > > As seen on ITE's website, the IT8712F is pin compatible with the > IT8702F, so I'd expect both chips to be rather similar, and support > could be easy to add. You could even try forcing the it87 driver and see > if it gives interesting results. > > -- > Jean Delvare > http://www.ensicaen.ismra.fr/~delvare/ -- *************************************************** John Sutton SCL Internet URL http://www.scl.co.uk/ Tel. +44 (0) 1239 711 888 ***************************************************