* SATO terminal takes 4 min to launch @ 2020-02-25 8:08 Ashish 2020-02-25 8:23 ` Ashish 0 siblings, 1 reply; 6+ messages in thread From: Ashish @ 2020-02-25 8:08 UTC (permalink / raw) To: poky [-- Attachment #1: Type: text/plain, Size: 681 bytes --] Hi All , I am having an yocto setup where the console-terminal ( Touchscreen panel ) from "matchbox-terminal" package takes around 4-7 min to launch This much time is taken for every time first instance of terminal is being launched. For subsequent terminal (terminal 2 onwards ) not much time is being taken. Any pointers or aspects which i can evaluate to get an idea as what is causing this issue ? or As an thumb rule approx how much time does sato-terminal takes to launch ? Is there any specific resources which i can look at to have pointers I am trying to understand the flow so as to understand various elements coming in play here . Thanks Ashish [-- Attachment #2: Type: text/html, Size: 816 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: SATO terminal takes 4 min to launch 2020-02-25 8:08 SATO terminal takes 4 min to launch Ashish @ 2020-02-25 8:23 ` Ashish 2020-02-25 8:40 ` [poky] " Mikko Rapeli 0 siblings, 1 reply; 6+ messages in thread From: Ashish @ 2020-02-25 8:23 UTC (permalink / raw) To: poky [-- Attachment #1: Type: text/plain, Size: 77 bytes --] Based on initial understanding of SATO , i am evaluating X11 to being with. [-- Attachment #2: Type: text/html, Size: 77 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [poky] SATO terminal takes 4 min to launch 2020-02-25 8:23 ` Ashish @ 2020-02-25 8:40 ` Mikko Rapeli 2020-03-07 20:57 ` Ashish 0 siblings, 1 reply; 6+ messages in thread From: Mikko Rapeli @ 2020-02-25 8:40 UTC (permalink / raw) To: ashish.emailaddress; +Cc: poky Hi, Please check systemd-analyze output. It may be that ssh and crypto key generation without HW support is taking a lot of time for example. Cheers, -Mikko ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: SATO terminal takes 4 min to launch 2020-02-25 8:40 ` [poky] " Mikko Rapeli @ 2020-03-07 20:57 ` Ashish 2020-03-07 21:17 ` [poky] " akuster 0 siblings, 1 reply; 6+ messages in thread From: Ashish @ 2020-03-07 20:57 UTC (permalink / raw) To: poky [-- Attachment #1: Type: text/plain, Size: 504 bytes --] Hi Group Members , Further debugging on same i observed that : 1) After board booted , if i try to launch the matchbox-teriminal by double clicking on the icon is takes around 3-4 min to give terminal . 2) But if i *run startx application specifically* and then run the matchbox-terminal it starts in seconds . If member's can share any input / feedback on same it would be helpful. Or if i am missing any obvious things here ( as this is my first project on QT graphics ) Thanks Ashish [-- Attachment #2: Type: text/html, Size: 796 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [poky] SATO terminal takes 4 min to launch 2020-03-07 20:57 ` Ashish @ 2020-03-07 21:17 ` akuster 2020-04-01 16:09 ` Ashishx88 0 siblings, 1 reply; 6+ messages in thread From: akuster @ 2020-03-07 21:17 UTC (permalink / raw) To: Ashish, poky [-- Attachment #1: Type: text/plain, Size: 672 bytes --] On 3/7/20 12:57 PM, Ashish wrote: > Hi Group Members , > > Further debugging on same i observed that : > 1) After board booted , if i try to launch the matchbox-teriminal by > double clicking on the icon > is takes around 3-4 min to give terminal . > > 2) But if i *run startx application specifically *and then run the > matchbox-terminal it starts in seconds . If member's can share any > input / feedback on same it would be helpful. Or if i am missing any > obvious things here ( as this is my first project on QT graphics ) can you provide dmesg or any other console messages. I bet there is some info there. - armin > Thanks Ashish > > [-- Attachment #2: Type: text/html, Size: 1660 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: SATO terminal takes 4 min to launch 2020-03-07 21:17 ` [poky] " akuster @ 2020-04-01 16:09 ` Ashishx88 0 siblings, 0 replies; 6+ messages in thread From: Ashishx88 @ 2020-04-01 16:09 UTC (permalink / raw) To: poky [-- Attachment #1: Type: text/plain, Size: 473 bytes --] Hi Armin , Sorry for delay in response. Thanks for pointer , debugging further i was able to improve the time ( approx by 30% ) by moving from core-image-minimal to X11. Still there is some approx 2 min but at-least an improvement by 50% of what i had . Currently having some issue accessing hardware due to lock-down . Will share the logs once i get an access to hardware. Thanks for pointer & apologies for delay in updating the thread. Thanks Ashish [-- Attachment #2: Type: text/html, Size: 594 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-04-01 16:09 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-02-25 8:08 SATO terminal takes 4 min to launch Ashish 2020-02-25 8:23 ` Ashish 2020-02-25 8:40 ` [poky] " Mikko Rapeli 2020-03-07 20:57 ` Ashish 2020-03-07 21:17 ` [poky] " akuster 2020-04-01 16:09 ` Ashishx88
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.