From: franhsutw@gmail.com
To: "'Joel Stanley'" <joel@jms.id.au>,
"'Benjamin Fair'" <benjaminfair@google.com>
Cc: "'OpenBMC Maillist'" <openbmc@lists.ozlabs.org>,
"'Fran Hsu'" <Fran.Hsu@quantatw.com>
Subject: RE: [PATCH dev-5.1 v5 1/4] ARM: dts: nuvoton: Add NPCM730 common device tree include file.
Date: Wed, 5 Jun 2019 21:43:46 +0800 [thread overview]
Message-ID: <033001d51ba4$c06727b0$41357710$@gmail.com> (raw)
In-Reply-To: <CACPK8Xe9rAEi8e5FDsbc89CQ_+iDhD5YW6+aqnZ0N5GxpZCR0Q@mail.gmail.com>
Hi Joel, Benjamin,
I did some modification and push the patch v6 for review.
The patch v6 fixed the warning of nuvoton-npcm730-gsj.dts only.
Regarding the other warning messages, I will co-work with Nuvoton team.
Thanks,
Fran
> -----Original Message-----
> From: Joel Stanley <joel@jms.id.au>
> Sent: Tuesday, June 4, 2019 1:29 PM
> To: Benjamin Fair <benjaminfair@google.com>
> Cc: Fran Hsu <franhsutw@gmail.com>; OpenBMC Maillist
> <openbmc@lists.ozlabs.org>; Fran Hsu <Fran.Hsu@quantatw.com>
> Subject: Re: [PATCH dev-5.1 v5 1/4] ARM: dts: nuvoton: Add NPCM730 common
> device tree include file.
>
> On Tue, 4 Jun 2019 at 05:23, Joel Stanley <joel@jms.id.au> wrote:
> >
> > On Fri, 31 May 2019 at 15:28, Benjamin Fair <benjaminfair@google.com>
> wrote:
> > > This looks great! I think it's ready to merge.
> > >
> > > On Fri, May 31, 2019 at 6:26 AM Fran Hsu <franhsutw@gmail.com> wrote:
> > > >
> > > > Quanta GSJ BMC uses the Nuvoton NPCM730 BMC soc.
> > > > This file describes the common setting of NPCM730 soc.
> > > >
> > > > Signed-off-by: Fran Hsu <Fran.Hsu@quantatw.com>
> > >
> > > Reviewed-by: Benjamin Fair <benjaminfair@google.com>
> >
> > Thanks Benjamin for reviewing, and Fran for working to get these
> > patches in a state that we can merge them. I've put them in the
> > dev-5.1 tree with some small tweaks to the commit messages.
>
> I spoke too soon. I see these warnings when building:
>
> ../arch/arm/boot/dts/nuvoton-npcm730-gsj.dts:307.6-25: Warning
> (i2c_bus_reg): /ahb/apb/i2c@8d000/ipmb@40000010:reg: I2C address must
> be less than 10-bits, got "0x40000010"
> ../arch/arm/boot/dts/nuvoton-npcm730-gsj.dts:320.6-25: Warning
> (i2c_bus_reg): /ahb/apb/i2c@8e000/ipmb@40000012:reg: I2C address must
> be less than 10-bits, got "0x40000012"
>
> Please send follow up patches to fix these warnings.
>
> The following warnings also exist when building the npcm kernel. If you could
> also fix those it would be appreciated:
>
> ../arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi:222.22-231.5: Warning
> (spi_bus_bridge): /ahb/fiu@fb000000: node name for SPI buses should be 'spi'
> also defined at ../arch/arm/boot/dts/nuvoton-npcm730-gsj.dts:81.22-126.5
> arch/arm/boot/dts/nuvoton-npcm730-gsj.dtb: Warning (spi_bus_reg):
> Failed prerequisite 'spi_bus_bridge'
> ../arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi:222.22-231.5: Warning
> (spi_bus_bridge): /ahb/fiu@fb000000: node name for SPI buses should be 'spi'
> also defined
> at ../arch/arm/boot/dts/nuvoton-npcm750-evb.dts:164.22-221.5
> ../arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi:233.22-244.5: Warning
> (spi_bus_bridge): /ahb/fiu@c0000000: node name for SPI buses should be 'spi'
> also defined
> at ../arch/arm/boot/dts/nuvoton-npcm750-evb.dts:223.22-242.5
>
> Cheers,
>
> Joel
prev parent reply other threads:[~2019-06-05 13:44 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-31 13:24 [PATCH dev-5.1 v5 1/4] ARM: dts: nuvoton: Add NPCM730 common device tree include file Fran Hsu
2019-05-31 13:24 ` [PATCH dev-5.1 v5 2/4] ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl file Fran Hsu
2019-05-31 15:28 ` Benjamin Fair
2019-05-31 13:24 ` [PATCH dev-5.1 v5 3/4] ARM: dts: nuvoton: Add Quanta GSJ BMC Device Tree Fran Hsu
2019-05-31 15:29 ` Benjamin Fair
2019-05-31 13:24 ` [PATCH dev-5.1 v5 4/4] ARM: dts: nuvoton: Add GPIOs and LEDs to GSJ device tree Fran Hsu
2019-05-31 15:29 ` Benjamin Fair
2019-05-31 15:27 ` [PATCH dev-5.1 v5 1/4] ARM: dts: nuvoton: Add NPCM730 common device tree include file Benjamin Fair
2019-06-04 5:23 ` Joel Stanley
2019-06-04 5:29 ` Joel Stanley
2019-06-04 8:30 ` franhsutw
2019-06-04 10:32 ` Tomer Maimon
2019-06-05 13:43 ` franhsutw [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='033001d51ba4$c06727b0$41357710$@gmail.com' \
--to=franhsutw@gmail.com \
--cc=Fran.Hsu@quantatw.com \
--cc=benjaminfair@google.com \
--cc=joel@jms.id.au \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.