From: "Angela" <angela.schmid@wolke7.net>
To: 'Daniel Vetter' <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Bug 51061] GPU Hang using VAAPI
Date: Wed, 20 Jun 2012 19:34:29 +0200 [thread overview]
Message-ID: <042001cd4f0a$f26f7370$d74e5a50$@wolke7.net> (raw)
In-Reply-To: <20120620073331.GA4835@phenom.ffwll.local>
> From: Daniel Vetter [mailto:daniel.vetter@ffwll.ch] On Behalf Of Daniel
> Dunno which kernel the -extra one is built from, but there's a drm-intel-
> experimental ppa at
>
> http://kernel.ubuntu.com/~kernel-ppa/mainline/drm-intel-experimental/
>
> which is built from the drm-intel-next-queued branch from
>
> http://cgit.freedesktop.org/~danvet/drm-intel
>
> That's pretty much the latest stuff. Note though that merging this into
3.5-rc
> has 2 simple merge conflicts.
Hello Daniel
Updated xorg-edgers, updated kernel (>3.5-rc3), merged
drm-intel-next-queued. "Fixed" the two conflicts, are they OK ?
No console, X starts in Vesa Mode.
Added the new kernel dmesg, my "fixed" conflict's and a good kernel dmesg.
What's next.
Angela
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.5.0-rc3-mine353+
root=UUID=8d6b1917-e239-43f0-a957-a5aa181e0255 ro drm.debug=0x06
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.0-rc3-mine353+
root=UUID=8d6b1917-e239-43f0-a957-a5aa181e0255 ro drm.debug=0x06
[ 1.103072] [drm] Initialized drm 1.1.0 20060810
[ 1.421330] [drm:intel_opregion_setup], graphic opregion physical addr:
0xbebbc018
[ 1.421341] [drm:intel_opregion_setup], SWSCI supported
[ 1.421360] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.421362] [drm] Driver supports precise vblank timestamp query.
[ 1.421365] [drm:intel_detect_pch], Found CougarPoint PCH
[ 1.421366] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[ 1.421368] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT
SNB/IVB-DESKTOPd
[ 1.421369] [drm:parse_general_features], BDB_GENERAL_FEATURES
int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120
display_clock_mode 0
[ 1.421370] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 1.421373] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT
tables:
[ 1.421375] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0
65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[ 1.421376] [drm:parse_lfp_panel_data], VBT initial LVDS value 300
[ 1.421377] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS
VBT tables:
[ 1.421379] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0
162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 1.421380] [drm:parse_sdvo_device_mapping], No SDVO device info is found
in VBT
[ 1.421385] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 1.421392] [drm:intel_modeset_init], 2 display pipes available.
[ 1.421710] [drm:intel_lvds_init], LVDS is not present in VBT
[ 1.421727] [drm:intel_crt_init], pch crt adpa set to 0xf40000
[ 1.422087] [drm:intel_sdvo_read_byte], i2c transfer returned -6
[ 1.422087] [drm:intel_sdvo_init], No SDVO device found on SDVOB
[ 1.422128] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
[ 1.424649] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f
[ 1.424650] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.427171] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f
[ 1.427172] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.427220] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
[ 1.429741] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f
[ 1.429742] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.432266] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f
[ 1.432266] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.432295] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
[ 1.434816] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f
[ 1.434817] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.437338] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f
[ 1.437339] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.437377] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off
[ 1.437379] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[ 1.484212] [drm:intel_update_fbc],
[ 1.484215] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off
[ 1.484216] [drm:gm45_get_vblank_counter], trying to get vblank count for
disabled pipe B
[ 1.484217] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[ 1.484219] [drm:gm45_get_vblank_counter], trying to get vblank count for
disabled pipe B
[ 1.484657] [drm:intel_update_fbc],
[ 1.484659] [drm:ironlake_init_pch_refclk], has_panel 0 has_lvds 0
has_pch_edp 0 has_cpu_edp 0 has_ck505 0
[ 1.484661] [drm:ironlake_init_pch_refclk], Disabling SSC entirely
[ 1.507012] [drm:init_status_page], render ring hws offset: 0x00000000
[ 1.559930] [drm:init_ring_common] *ERROR* render ring initialization
failed ctl 00000000 head 00000000 tail 00000000 start 00000000
[ 1.560018] [drm:init_status_page], bsd ring hws offset: 0x00022000
[ 1.615897] [drm:init_ring_common] *ERROR* bsd ring initialization failed
ctl 00000000 head 00000000 tail 00000000 start 00000000
[ 1.616018] [drm:i915_driver_load] *ERROR* failed to init modeset
vi drivers/gpu/drm/i915/intel_ringbuffer.c
/*
<<<<<<< HEAD
*/
ret = i915_gem_object_set_to_gtt_domain(obj, true);
if (ret)
goto err_unpin;
/*
ring->virtual_start = ioremap_wc(dev->agp->base + obj->gtt_offset,
ring->size);
=======
*/
ring->virtual_start =
ioremap_wc(dev_priv->mm.gtt->gma_bus_addr + obj->gtt_offset,
ring->size);
/*
>>>>>>> drm-intel/drm-intel-next-queued
*/
vi drivers/gpu/drm/i915/i915_reg.h
/*
<<<<<<< HEAD
IVB has funny definitions for which plane to flip.
*/
#define MI_DISPLAY_FLIP_IVB_PLANE_A (0 << 19)
#define MI_DISPLAY_FLIP_IVB_PLANE_B (1 << 19)
#define MI_DISPLAY_FLIP_IVB_SPRITE_A (2 << 19)
#define MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)
#define MI_DISPLAY_FLIP_IVB_PLANE_C (4 << 19)
#define MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19)
/*
=======
*/
#define MI_ARB_ON_OFF MI_INSTR(0x08, 0)
#define MI_ARB_ENABLE (1<<0)
#define MI_ARB_DISABLE (0<<0)
/*
>>>>>>> drm-intel/drm-intel-next-queued
*/
Good kernel:
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.5.0-rc2-mine5+
root=UUID=8d6b1917-e239-43f0-a957-a5aa181e0255 ro drm.debug=0x06
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.0-rc2-mine5+
root=UUID=8d6b1917-e239-43f0-a957-a5aa181e0255 ro drm.debug=0x06
[ 1.103710] [drm] Initialized drm 1.1.0 20060810
[ 1.388663] [drm:intel_opregion_setup], graphic opregion physical addr:
0xbebbc018
[ 1.388674] [drm:intel_opregion_setup], SWSCI supported
[ 1.388692] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.388694] [drm] Driver supports precise vblank timestamp query.
[ 1.388697] [drm:intel_detect_pch], Found CougarPoint PCH
[ 1.388699] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[ 1.388701] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT
SNB/IVB-DESKTOPd
[ 1.388702] [drm:parse_general_features], BDB_GENERAL_FEATURES
int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120
display_clock_mode 0
[ 1.388703] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 1.388705] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT
tables:
[ 1.388707] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0
65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[ 1.388708] [drm:parse_lfp_panel_data], VBT initial LVDS value 300
[ 1.388710] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS
VBT tables:
[ 1.388711] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0
162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 1.388712] [drm:parse_sdvo_device_mapping], No SDVO device info is found
in VBT
[ 1.388725] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 1.388731] [drm:intel_modeset_init], 2 display pipes available.
[ 1.389042] [drm:intel_lvds_init], LVDS is not present in VBT
[ 1.389059] [drm:intel_crt_init], pch crt adpa set to 0xf40000
[ 1.389416] [drm:intel_sdvo_read_byte], i2c transfer returned -6
[ 1.389417] [drm:intel_sdvo_init], No SDVO device found on SDVOB
[ 1.389461] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
[ 1.391987] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 1.391988] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.394509] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 1.394509] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.394559] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
[ 1.397079] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 1.397080] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.399599] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 1.399600] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.399628] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
[ 1.402148] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 1.402149] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.404670] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 1.404671] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.404710] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off
[ 1.404712] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[ 1.468208] [drm:intel_update_fbc],
[ 1.468210] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off
[ 1.468212] [drm:gm45_get_vblank_counter], trying to get vblank count for
disabled pipe B
[ 1.468213] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[ 1.468215] [drm:gm45_get_vblank_counter], trying to get vblank count for
disabled pipe B
[ 1.468653] [drm:intel_update_fbc],
[ 1.468655] [drm:ironlake_init_pch_refclk], has_panel 0 has_lvds 0
has_pch_edp 0 has_cpu_edp 0 has_ck505 0
[ 1.468657] [drm:ironlake_init_pch_refclk], Disabling SSC entirely
[ 1.490812] [drm:init_status_page], render ring hws offset: 0x00000000
[ 1.491057] [drm:init_status_page], bsd ring hws offset: 0x00022000
[ 1.491164] [drm:init_status_page], blitter ring hws offset: 0x00043000
[ 1.491307] [drm:intel_enable_rc6], Sandybridge: deep RC6 disabled
[ 1.491308] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 1.583993] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:7:VGA-1]
[ 1.583998] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug
detect cycle: adpa=0xf40000
[ 1.599925] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug
adpa=0xf40000, result 0
[ 1.599936] [drm:intel_crt_detect], CRT not detected via hotplug
[ 1.599939] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:7:VGA-1] disconnected
[ 1.599943] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:10:HDMI-A-1]
[ 1.600326] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
adapter i915 gmbus dpb
[ 1.600327] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:10:HDMI-A-1] disconnected
[ 1.600328] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:13:DP-1]
[ 1.602847] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 1.610431] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 1.618431] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 1.623908] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 1.623913] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:13:DP-1] disconnected
[ 1.623916] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:16:HDMI-A-2]
[ 1.631904] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050
r(1)
[ 1.631908] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
adapter i915 gmbus dpc
[ 1.631912] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:16:HDMI-A-2] disconnected
[ 1.631915] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:18:HDMI-A-3]
[ 1.919718] [drm:drm_detect_monitor_audio], Monitor has basic audio
support
[ 2.207550] [drm:drm_edid_to_eld], ELD monitor Philips FTV
[ 2.207562] [drm:drm_edid_to_eld], ELD size 10, SAD count 3
[ 2.207584] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:18:HDMI-A-3] probed modes :
[ 2.207588] [drm:drm_mode_debug_printmodeline], Modeline 53:"1920x1080"
50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15
[ 2.207592] [drm:drm_mode_debug_printmodeline], Modeline 48:"1920x1080"
60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[ 2.207596] [drm:drm_mode_debug_printmodeline], Modeline 44:"1366x768" 60
85885 1366 1439 1583 1800 768 769 772 795 0x0 0x6
[ 2.207599] [drm:drm_mode_debug_printmodeline], Modeline 42:"1360x768" 60
85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
[ 2.207603] [drm:drm_mode_debug_printmodeline], Modeline 41:"1280x800" 60
83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
[ 2.207614] [drm:drm_mode_debug_printmodeline], Modeline 40:"1280x800" 60
71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
[ 2.207615] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x768" 60
79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
[ 2.207617] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x768" 60
68250 1280 1328 1360 1440 768 771 778 790 0x40 0x9
[ 2.207618] [drm:drm_mode_debug_printmodeline], Modeline 52:"1280x720" 50
74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
[ 2.207620] [drm:drm_mode_debug_printmodeline], Modeline 47:"1280x720" 60
74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[ 2.207621] [drm:drm_mode_debug_printmodeline], Modeline 55:"1440x576" 50
27000 1440 1464 1590 1728 576 580 586 625 0x40 0x101a
[ 2.207623] [drm:drm_mode_debug_printmodeline], Modeline 37:"1024x768" 60
65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 2.207624] [drm:drm_mode_debug_printmodeline], Modeline 50:"1440x480" 60
27000 1440 1478 1602 1716 480 488 494 525 0x40 0x101a
[ 2.207626] [drm:drm_mode_debug_printmodeline], Modeline 43:"1024x576" 60
46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6
[ 2.207627] [drm:drm_mode_debug_printmodeline], Modeline 35:"800x600" 60
40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 2.207629] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 56
36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 2.207630] [drm:drm_mode_debug_printmodeline], Modeline 51:"720x576" 50
27000 720 732 796 864 576 581 586 625 0x40 0xa
[ 2.207632] [drm:drm_mode_debug_printmodeline], Modeline 36:"848x480" 60
33750 848 864 976 1088 480 486 494 517 0x40 0x5
[ 2.207633] [drm:drm_mode_debug_printmodeline], Modeline 46:"720x480" 60
27000 720 736 798 858 480 489 495 525 0x40 0xa
[ 2.207635] [drm:drm_mode_debug_printmodeline], Modeline 31:"640x480" 60
25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 2.207636] [drm:drm_mode_debug_printmodeline], Modeline 45:"640x480" 60
25175 640 656 752 800 480 490 492 525 0x40 0xa
[ 2.207638] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 60
25175 640 656 752 800 480 489 492 525 0x40 0xa
[ 2.207639] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:19:DP-2]
[ 2.210168] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 2.218036] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 2.226031] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 2.231504] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 2.231509] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:19:DP-2] disconnected
[ 2.231512] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:21:DP-3]
[ 2.234036] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 2.242018] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 2.250014] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 2.255490] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 2.255494] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:21:DP-3] disconnected
[ 2.255497] [drm:drm_setup_crtcs],
[ 2.255500] [drm:drm_enable_connectors], connector 7 enabled? no
[ 2.255502] [drm:drm_enable_connectors], connector 10 enabled? no
[ 2.255504] [drm:drm_enable_connectors], connector 13 enabled? no
[ 2.255506] [drm:drm_enable_connectors], connector 16 enabled? no
[ 2.255508] [drm:drm_enable_connectors], connector 18 enabled? yes
[ 2.255511] [drm:drm_enable_connectors], connector 19 enabled? no
[ 2.255513] [drm:drm_enable_connectors], connector 21 enabled? no
[ 2.255515] [drm:drm_target_preferred], looking for cmdline mode on
connector 18
[ 2.255517] [drm:drm_target_preferred], looking for preferred mode on
connector 18
[ 2.255519] [drm:drm_target_preferred], found mode 1920x1080
[ 2.255521] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 2.255525] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
[ 2.261081] [drm:intelfb_create], allocated 1920x1080 fb: 0x00064000, bo
ffff88020fdb2a00
[ 2.261187] fbcon: inteldrmfb (fb0) is primary device
[ 2.261219] [drm:drm_crtc_helper_set_config],
[ 2.261220] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25]
#connectors=1 (x y) (0 0)
[ 2.261225] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode
set
[ 2.261225] [drm:drm_crtc_helper_set_config], modes are different, full
mode set
[ 2.261227] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0
0 0 0 0 0x0 0x0
[ 2.261228] [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080"
50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15
[ 2.261229] [drm:drm_crtc_helper_set_config], encoder changed, full mode
switch
[ 2.261229] [drm:drm_crtc_helper_set_config], crtc changed, full mode
switch
[ 2.261230] [drm:drm_crtc_helper_set_config], [CONNECTOR:18:HDMI-A-3] to
[CRTC:3]
[ 2.261231] [drm:drm_crtc_helper_set_config], attempting to set mode from
userspace
[ 2.261232] [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080"
50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15
[ 2.261234] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[ 2.261276] [drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI
[ 2.261277] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8
(max display bpc 8)
[ 2.261278] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
[ 2.261279] [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080"
50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15
[ 2.261280] [drm:intel_get_pch_pll], CRTC:3 allocated PCH PLL c6014
[ 2.261280] [drm:intel_get_pch_pll], using pll 0 for pipe 0
[ 2.261281] [drm:intel_get_pch_pll], switching PLL c6014 off
[ 2.315421] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 2.315426] [drm:ironlake_update_plane], Writing base 00064000 00000000 0
0 7680
[ 2.315428] [drm:intel_update_fbc],
[ 2.315431] [drm:sandybridge_update_wm], FIFO watermarks For pipe A -
plane 6, cursor: 6
[ 2.315433] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc
lines 3, cursor 6
[ 2.315435] [drm:ironlake_check_srwm], watermark 2: display plane 12, fbc
lines 3, cursor 6
[ 2.315437] [drm:ironlake_check_srwm], watermark 3: display plane 54, fbc
lines 3, cursor 6
[ 2.315441] [drm:drm_crtc_helper_set_mode], [ENCODER:17:TMDS-17] set
[MODE:24:1920x1080]
[ 2.315442] [drm:intel_hdmi_mode_set], Enabling HDMI audio on pipe A
[ 2.315445] [drm:intel_write_eld], ELD on [CONNECTOR:18:HDMI-A-3],
[ENCODER:17:TMDS-17]
[ 2.315447] [drm:ironlake_write_eld], ELD on pipe A
[ 2.315449] [drm:ironlake_write_eld], Audio directed to unknown port
[ 2.315458] [drm:ironlake_write_eld], ELD size 10
[ 2.371409] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 2.427378] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 2.427387] [drm:sandybridge_update_wm], FIFO watermarks For pipe A -
plane 6, cursor: 6
[ 2.427389] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc
lines 3, cursor 6
[ 2.427391] [drm:ironlake_check_srwm], watermark 2: display plane 12, fbc
lines 3, cursor 6
[ 2.427393] [drm:ironlake_check_srwm], watermark 3: display plane 54, fbc
lines 3, cursor 6
[ 2.483340] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 2.539305] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 2.540109] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700
[ 2.540111] [drm:gen6_fdi_link_train], FDI train 1 done.
[ 2.540759] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
[ 2.540760] [drm:gen6_fdi_link_train], FDI train 2 done.
[ 2.540761] [drm:gen6_fdi_link_train], FDI train done.
[ 2.540762] [drm:intel_enable_pch_pll], enable PCH PLL c6014 (active 0,
on? 0)for crtc 3
[ 2.540763] [drm:intel_enable_pch_pll], enabling PCH PLL c6014
[ 2.541969] [drm:intel_update_fbc],
[ 2.542471] [drm:drm_crtc_helper_set_config], Setting connector DPMS
state to on
[ 2.542472] [drm:drm_crtc_helper_set_config],
[CONNECTOR:18:HDMI-A-3] set DPMS on
[ 2.542488] [drm:drm_crtc_helper_set_config],
[ 2.542488] [drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB]
[ 2.542508] [drm:drm_crtc_helper_set_config],
[ 2.542509] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25]
#connectors=1 (x y) (0 0)
[ 2.542512] [drm:drm_crtc_helper_set_config], [CONNECTOR:18:HDMI-A-3] to
[CRTC:3]
[ 2.545365] fb0: inteldrmfb frame buffer device
[ 2.545365] drm: registered panic notifier
[ 2.546081] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 2.562044] [drm:intel_prepare_page_flip], preparing flip with no unpin
work?
[ 3.443806] [drm:drm_crtc_helper_set_config],
[ 3.443807] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25]
#connectors=1 (x y) (0 0)
[ 3.443812] [drm:drm_crtc_helper_set_config], [CONNECTOR:18:HDMI-A-3] to
[CRTC:3]
[ 3.495686] [drm:drm_crtc_helper_set_config],
[ 3.495687] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25]
#connectors=1 (x y) (0 0)
[ 3.495691] [drm:drm_crtc_helper_set_config], [CONNECTOR:18:HDMI-A-3] to
[CRTC:3]
[ 12.560879] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug
adpa=0xf40000, result 0
[ 12.560883] [drm:intel_crt_detect], CRT not detected via hotplug
[ 12.560887] [drm:output_poll_execute], [CONNECTOR:7:VGA-1] status updated
from 2 to 2
[ 12.561235] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
adapter i915 gmbus dpb
[ 12.561237] [drm:output_poll_execute], [CONNECTOR:10:HDMI-A-1] status
updated from 2 to 2
[ 12.563758] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 12.571405] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 12.579400] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 12.584877] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 12.584882] [drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated
from 2 to 2
[ 12.592875] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050
r(1)
[ 12.592879] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
adapter i915 gmbus dpc
[ 12.592883] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-2] status
updated from 2 to 2
[ 12.880697] [drm:drm_detect_monitor_audio], Monitor has basic audio
support
[ 12.880702] [drm:output_poll_execute], [CONNECTOR:18:HDMI-A-3] status
updated from 1 to 1
[ 12.883224] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 12.891206] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 12.899200] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 12.904676] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 12.904681] [drm:output_poll_execute], [CONNECTOR:19:DP-2] status updated
from 2 to 2
[ 12.907204] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 12.915190] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 12.923185] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
[ 12.928662] [drm:intel_dp_detect], DPCD: 0000000000000000
[ 12.928667] [drm:output_poll_execute], [CONNECTOR:21:DP-3] status updated
from 2 to 2
[ 47.693915] [drm:drm_crtc_helper_set_config],
[ 47.693917] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25]
#connectors=1 (x y) (0 0)
[ 47.693925] [drm:drm_crtc_helper_set_config], [CONNECTOR:18:HDMI-A-3] to
[CRTC:3]
next prev parent reply other threads:[~2012-06-20 17:34 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-18 18:33 [Bug 51061] GPU Hang using VAAPI Angela
2012-06-20 6:28 ` Angela
2012-06-20 7:33 ` Daniel Vetter
2012-06-20 17:34 ` Angela [this message]
2012-06-20 18:08 ` Daniel Vetter
2012-06-20 19:21 ` Angela
2012-06-20 19:29 ` Daniel Vetter
2012-06-20 19:44 ` Angela
2012-06-20 20:48 ` Daniel Vetter
2012-06-20 22:22 ` Angela
2012-06-25 17:18 ` Angela
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='042001cd4f0a$f26f7370$d74e5a50$@wolke7.net' \
--to=angela.schmid@wolke7.net \
--cc=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.