From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Remus" Date: Wed, 13 Oct 2004 12:53:51 +0000 Subject: [LARTC] Traffic shaping and tun devices Message-Id: <045101c4b123$b063f8d0$6e69690a@RIMAS> MIME-Version: 1 Content-Type: multipart/mixed; boundary="----=_NextPart_000_044E_01C4B12C.1206F620" List-Id: To: lartc@vger.kernel.org This is a multi-part message in MIME format. ------=_NextPart_000_044E_01C4B12C.1206F620 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi folks, I have three network cards on my Slackware box and eth0 and eth1 are for = two Internet connections. They have imq0 and imq1. All traffic shaping works fine. Internal eth2 does no traffic shaping. But recently I have put two OpenVPN tunnels (tun devices) and both work = via eth0. So my question is - how to shape the traffic on these tun0 and tun1 = devices? Thanks Remus ------=_NextPart_000_044E_01C4B12C.1206F620 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi folks,
 
I have three network cards on my = Slackware box and=20 eth0 and eth1 are for two Internet connections.
They have imq0 and imq1. All traffic = shaping works=20 fine.
Internal eth2 does no traffic = shaping.
 
But recently I have put two OpenVPN = tunnels (tun=20 devices) and both work via eth0.
 
So my question is - how to shape the = traffic on=20 these tun0 and tun1 devices?
 
 
 
Thanks
 
Remus
 
 
------=_NextPart_000_044E_01C4B12C.1206F620-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/