From: "Jaehoon Chung" <jh80.chung@samsung.com>
To: "'Martyn Welch'" <martyn.welch@collabora.com>,
<uboot-imx@nxp.com>, <sbabic@denx.de>
Cc: "'Martyn Welch'" <martyn.welch@collabora.co.uk>,
"'Simon Glass'" <sjg@chromium.org>, <u-boot@lists.denx.de>
Subject: RE: [PATCH v5 4/5] drivers: power: pmic: Enable use of rn5t567 PMIC in SPL
Date: Tue, 25 Oct 2022 19:25:52 +0900 [thread overview]
Message-ID: <045d01d8e85c$28d9fe80$7a8dfb80$@samsung.com> (raw)
In-Reply-To: <20221025095503.1254110-4-martyn.welch@collabora.com>
> -----Original Message-----
> From: Martyn Welch [mailto:martyn.welch@collabora.com]
> Sent: Tuesday, October 25, 2022 6:55 PM
> To: uboot-imx@nxp.com; sbabic@denx.de; Jaehoon Chung <jh80.chung@samsung.com>
> Cc: Martyn Welch <martyn.welch@collabora.co.uk>; Simon Glass <sjg@chromium.org>; u-
> boot@lists.denx.de
> Subject: [PATCH v5 4/5] drivers: power: pmic: Enable use of rn5t567 PMIC in SPL
>
> From: Martyn Welch <martyn.welch@collabora.co.uk>
>
> The support added later in this series tweaks the PMIC voltages in the
> SPL. Enable support for the rn5t567 in SPL builds to allow this to be done
> cleanly.
>
> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
> Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Best Regards,
Jaehoon Chung
> ---
>
> Changes in v3:
> - New patch (replaces addition of legacy support for rn5t567)
>
> Changes in v4:
> - None
>
> Changes in v5:
> - Rebase to current master branch
>
> drivers/power/pmic/Kconfig | 8 ++++++++
> drivers/power/pmic/Makefile | 2 +-
> 2 files changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
> index 0478f2aa1d..628d3a94bc 100644
> --- a/drivers/power/pmic/Kconfig
> +++ b/drivers/power/pmic/Kconfig
> @@ -300,6 +300,14 @@ config PMIC_RN5T567
> regulators Real-Time Clock and 4 GPIOs. This driver provides
> register access only.
>
> +config SPL_PMIC_RN5T567
> + bool "Enable driver for Ricoh RN5T567 PMIC in SPL"
> + depends on SPL_DM_PMIC
> + ---help---
> + The RN5T567 is a PMIC with 4 step-down DC/DC converters, 5 LDO
> + regulators Real-Time Clock and 4 GPIOs. This driver provides
> + register access only.
> +
> config PMIC_TPS65090
> bool "Enable driver for Texas Instruments TPS65090 PMIC"
> ---help---
> diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
> index e1d3545490..58c6507c58 100644
> --- a/drivers/power/pmic/Makefile
> +++ b/drivers/power/pmic/Makefile
> @@ -22,7 +22,7 @@ obj-$(CONFIG_$(SPL_)PMIC_AXP) += axp.o
> obj-$(CONFIG_PMIC_MAX8997) += max8997.o
> obj-$(CONFIG_PMIC_QCOM) += pmic_qcom.o
> obj-$(CONFIG_$(SPL_TPL_)PMIC_RK8XX) += rk8xx.o
> -obj-$(CONFIG_PMIC_RN5T567) += rn5t567.o
> +obj-$(CONFIG_$(SPL_)PMIC_RN5T567) += rn5t567.o
> obj-$(CONFIG_PMIC_TPS65090) += tps65090.o
> obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o
> obj-$(CONFIG_DM_PMIC_TPS65910) += pmic_tps65910_dm.o
> --
> 2.35.1
next prev parent reply other threads:[~2022-10-25 10:26 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-25 9:54 [PATCH v5 1/5] imx8m: USDHC3 base address definition for i.MX8MP Martyn Welch
2022-10-25 9:54 ` [PATCH v5 2/5] ARM: imx: imx8mp: Enable support for i2c5 and i2c6 on i.MX8MP Martyn Welch
2022-10-26 13:00 ` Peng Fan
2022-11-08 16:38 ` sbabic
2022-10-25 9:55 ` [PATCH v5 3/5] drivers: power: pmic: Add support for rn5t568 PMIC Martyn Welch
2022-10-25 9:59 ` Jaehoon Chung
2022-11-08 16:39 ` sbabic
2022-10-25 9:55 ` [PATCH v5 4/5] drivers: power: pmic: Enable use of rn5t567 PMIC in SPL Martyn Welch
2022-10-25 10:25 ` Jaehoon Chung [this message]
2022-11-08 16:39 ` sbabic
2022-10-25 9:55 ` [PATCH v5 5/5] arm: imx8mp: Initial MSC SM2S iMX8MP support Martyn Welch
2022-11-08 16:49 ` sbabic
2022-11-08 16:37 ` [PATCH v5 1/5] imx8m: USDHC3 base address definition for i.MX8MP sbabic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='045d01d8e85c$28d9fe80$7a8dfb80$@samsung.com' \
--to=jh80.chung@samsung.com \
--cc=martyn.welch@collabora.co.uk \
--cc=martyn.welch@collabora.com \
--cc=sbabic@denx.de \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.