Re: [PATCH v6 2/2] arm64: dts: qcom: shikra: Correct QCE node configuration

[Wenjia Zhang <wenjia.zhang@oss.qualcomm.com>]

On 9/7/2026 8:03 PM, Kuldeep Singh wrote:
> Shikra is derived from Agatti and uses the same QCE integration.
> Update the QCE node to match the underlying hardware implementation by
> adjusting the fallback compatible and related properties, including
> clocks and clock-names.
>
> Signed-off-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
> ---
>   arch/arm64/boot/dts/qcom/shikra.dtsi | 9 +++++----
>   1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
> index c1f06f692f66..30c7cabc058a 100644
> --- a/arch/arm64/boot/dts/qcom/shikra.dtsi
> +++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
> @@ -1075,10 +1075,12 @@ cryptobam: dma-controller@1b04000 {
>   			qcom,controlled-remotely;
>   			num-channels = <16>;
>   			qcom,num-ees = <4>;
> +			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
> +			clock-names = "bam_clk";
>   		};
>   
>   		crypto: crypto@1b3a000 {
> -			compatible = "qcom,shikra-qce", "qcom,sm8150-qce", "qcom,qce";
> +			compatible = "qcom,shikra-qce", "qcom,ipq4019-qce", "qcom,qce";
>   			reg = <0x0 0x01b3a000 0x0 0x6000>;
>   			dmas = <&cryptobam 4>, <&cryptobam 5>;
>   			dma-names = "rx", "tx";
> @@ -1089,9 +1091,8 @@ crypto: crypto@1b3a000 {
>   				 <&apps_smmu 0x96 0x0011>,
>   				 <&apps_smmu 0x98 0x0001>,
>   				 <&apps_smmu 0x9f 0x0>;
> -			interconnects = <&system_noc MASTER_CRYPTO_CORE0 0
> -					 &mc_virt SLAVE_EBI_CH0 0>;
> -			interconnect-names = "memory";
> +			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
> +			clock-names = "core";
>   		};
>   
>   		qfprom: efuse@1b44000 {
Tested-by: Wanjia Zhang <wenjia.zhang@oss.qualcomm.com> #on shikra device