RE: [PATCH v7 0/6] ARM: dts: add support for exynos hdmi subsystem

[Kukjin Kim <kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>]

Rahul Sharma wrote:
> 
> On 29 August 2013 19:05, Tomasz Figa <t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> wrote:
> > Hi Rahul,
> >
> > On Thursday 29 of August 2013 19:22:51 Rahul Sharma wrote:
> >> It adds Device tree nodes and clocks information for HDMI subsystem
> >> for exynos5420 and exynos5250 SoCs. It adds pinctrl node for hdmi
> >> hpd gpio and update binding documents.
> >>
> >> This set is based on kukjin's for-next branch at
> >> http://git.kernel.org/cgit/linux/kernel/git/kgene/linux-samsung.git.
> >>
> >> v7:
> >> 1) Minor change in of-documentation.
> >> 2) Squash gpio pin-ctrl and ddc patch to one patch.
> >>
> >> v6:
> >> 1) Update clock numbers as per change in mux and divider clocks.
> >> 2) Isolate board changes from SoC patch and add a different patch for
> >> ddc.
> >>
> >> v5:
> >> 1) Merged Clock addition patch to DT nmde addition patch.
> >> 2) Add dout_pixel clock for hdmi in place of sclk_pixel.
> >> 3) Enable mixer node in soc dtsi file.
> >>
> >> v4:
> >> 1) Remove the movement of common properties to Exynos5.dtsi for
> >> I2C and hdmi subsystem.
> >> 2) Change the title of the patches.
> >>
> >> v3:
> >> 1) Rebase to kgene for-next based on 3.11-rc1.
> >> 2) Changes clock numbers as per updated clocks file for
> >> exyno5250 and exynos5420.
> >> 3) Dropped Sachin patch as already got merged.
> >>
> >> v2:
> >> 1) Added patch for moving common i2c properties to exynos5.dtsi
> >> 2) Added patch for moving common hdmi, mixer properties to exynos5.dtsi
> >> 3) moved hpd pinctrl node to board file.
> >> 4) Added Sachin's patch to update binding document for hdmi with hpd
> >> information.
> >>
> >> Andrew Bresticker (1):
> >>   ARM: dts: add i2c device nodes for Exynos5420
> >>
> >> Rahul Sharma (4):
> >>   of/documentation: update with clock information for exynos hdmi
> >>     subsystem
> >>   ARM: dts: add clocks to hdmi dt node for exynos5250
> >>   ARM: dts: add dt nodes for hdmi subsystem for exynos5420
> >>   ARM: dts: enable hdmi subsystem for exynos5420 smdk board
> >>
> >> Sean Paul (1):
> >>   ARM: dts: add mixer clocks to mixer node for Exynos5250
> >>
> >>  .../devicetree/bindings/video/exynos_hdmi.txt      |   14 +++-
> >>  .../devicetree/bindings/video/exynos_mixer.txt     |    4 ++
> >>  arch/arm/boot/dts/exynos5250.dtsi                  |    8 ++-
> >>  arch/arm/boot/dts/exynos5420-smdk5420.dts          |   26 +++++++
> >>  arch/arm/boot/dts/exynos5420.dtsi                  |   75
> >> ++++++++++++++++++++ 5 files changed, 123 insertions(+), 4 deletions(-)
> >
> > The whole series looks good to me now. Thanks for keeping up with all
> the
> > comments.
> 
> Thanks Tomasz.
> 
> >
> > Reviewed-by: Tomasz Figa <t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> >
Tomasz, thanks for your review.
> 
> Hi Mr. Kim,
> 
> Please consider this series for your for-next branch.
> 
Yeah, looks good to me as well. Applied this whole series.

Thanks,
Kukjin

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html