From: "Adam Kropelin" <akropel1@rochester.rr.com>
To: sparclinux@vger.kernel.org
Subject: Re: [TESTERS NEEDED]: Rewritten ESP driver
Date: Mon, 16 Apr 2007 22:58:39 +0000 [thread overview]
Message-ID: <06af01c7807a$c598a830$84163e05@kroptech.com> (raw)
In-Reply-To: <20070412.233350.41640545.davem@davemloft.net>
David Miller wrote:
> From: "Adam Kropelin" <akropel1@rochester.rr.com>
> Date: Sun, 15 Apr 2007 12:03:26 -0400
>
>> ESP: data done csr[a6400310] flgs[1] sent[73728]
>> ESP: start data addr[c004c000] len[0] write(1)
>> esp: esp0: DMA error, csr¤40031e
>
> I know what this bug is, it should be fixed by the following patch,
> please give it a try.
That works very nicely! I can now boot right up until smartd is
launched. Disabling smartd allows a complete boot and the disk survives
some beating with concurrent 'tar -x'.
Spot mentioned smartd being problematic with the old esp driver, too.
dmesg is below, if it's of interest. I wasn't able to find an
illuminating esp_debug setting that didn't result in an overabundance of
output, so this is with no esp_debug.
--Adam
scsi0 : esp
esp: esp0 found at /sbus@1f,0/espdma@e,8400000/esp@e,8800000,
regs[1ffe8800000:1ffe8400000] irq[10]
esp: esp0 is a FAS100A, 40 MHz (ccf=0), SCSI ID 7
scsi 0:0:1:0: Direct-Access FUJITSU MAJ3182M SUN18G 0804 PQ: 0
ANSI: 2
target0:0:1: Beginning Domain Validation
target0:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
target0:0:1: Domain Validation skipping write tests
target0:0:1: Ending Domain Validation
<...>
Starting mDNSResponder... [ OK ]
Starting smartd: esp: esp0: Aborting command [fffff80030b05280:2a]
esp: esp0: Active command [fffff80030b05280:2a]
esp: esp0: Aborting command [fffff80030b05280:00]
esp: esp0: Queued command [fffff80030b05280:00]
esp: esp0: Aborting command [fffff80030b05280:00]
esp: esp0: Queued command [fffff80030b05280:00]
sd 0:0:1:0: rejecting I/O to offline device
Buffer I/O error on device sda4, logical block 487611
lost page write due to I/O error on sda4
sd 0:0:1:0: rejecting I/O to offline device
Buffer I/O error on device sda4, logical block 0
lost page write due to I/O error on sda4
Buffer I/O error on device sda4, logical block 1
lost page write due to I/O error on sda4
sd 0:0:1:0: rejecting I/O to offline device
Buffer I/O error on device sda4, logical block 1029
lost page write due to I/O error on sda4
sd 0:0:1:0: rejecting I/O to offline device
Buffer I/O error on device sda4, logical block 327766
lost page write due to I/O error on sda4
sd 0:0:1:0: rejecting I/O to offline device
Buffer I/O error on device sda4, logical block 426011
lost page write due to I/O error on sda4
sd 0:0:1:0: rejecting I/O to offline device
Buffer I/O error on device sda4, logical block 458752
lost page write due to I/O error on sda4
Buffer I/O error on device sda4, logical block 458753
lost page write due to I/O error on sda4
Buffer I/O error on device sda4, logical block 458754
lost page write due to I/O error on sda4
sd 0:0:1:0: rejecting I/O to offline device
Buffer I/O error on device sda4, logical block 458789
lost page write due to I/O error on sda4
sd 0:0:1:0: rejecting I/O to offline device
sd 0:0:1:0: rejecting I/O to offline device
<...repeats...>
next prev parent reply other threads:[~2007-04-16 22:58 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-13 6:33 [TESTERS NEEDED]: Rewritten ESP driver David Miller
2007-04-13 10:27 ` Leen Besselink
2007-04-13 15:59 ` Pasi Pirhonen
2007-04-13 20:18 ` Tom "spot" Callaway
2007-04-13 20:33 ` David Miller
2007-04-13 20:48 ` David Miller
2007-04-13 23:10 ` David Miller
2007-04-14 4:10 ` Tom "spot" Callaway
2007-04-14 4:26 ` David Miller
2007-04-14 5:01 ` David Miller
2007-04-14 10:38 ` Pasi Pirhonen
2007-04-14 17:01 ` David Miller
2007-04-14 17:26 ` David Miller
2007-04-14 17:54 ` Pasi Pirhonen
2007-04-14 22:58 ` Tom "spot" Callaway
2007-04-15 0:12 ` David Miller
2007-04-15 0:54 ` Tom "spot" Callaway
2007-04-15 2:24 ` David Miller
2007-04-15 9:16 ` Tom "spot" Callaway
2007-04-15 9:45 ` Pasi Pirhonen
2007-04-15 16:03 ` Adam Kropelin
2007-04-15 23:15 ` Adam Kropelin
2007-04-16 0:55 ` Adam Kropelin
2007-04-16 5:03 ` David Miller
2007-04-16 8:29 ` David Miller
2007-04-16 20:43 ` David Miller
2007-04-16 20:46 ` David Miller
2007-04-16 22:58 ` Adam Kropelin [this message]
2007-04-16 23:38 ` David Miller
2007-04-17 3:35 ` Adam Kropelin
2007-04-17 7:19 ` David Miller
2007-04-17 15:28 ` BERTRAND Joël
2007-04-17 19:02 ` David Miller
2007-04-17 19:29 ` BERTRAND Joël
2007-04-17 19:37 ` David Miller
2007-04-17 20:46 ` Tom "spot" Callaway
2007-04-17 20:52 ` Tom "spot" Callaway
2007-04-17 21:12 ` David Miller
2007-04-17 21:13 ` David Miller
2007-04-17 23:59 ` Adam Kropelin
2007-04-19 7:32 ` David Miller
2007-04-19 7:41 ` David Miller
2007-04-19 7:47 ` David Miller
2007-04-19 9:04 ` Pasi Pirhonen
2007-04-19 12:19 ` BERTRAND Joël
2007-04-19 13:04 ` Pasi Pirhonen
2007-04-19 19:41 ` David Miller
2007-04-20 22:55 ` Adam Kropelin
2007-04-20 23:19 ` David Miller
2007-04-21 22:38 ` Georg Chini
2007-04-21 22:41 ` David Miller
2007-04-21 23:20 ` David Miller
2007-04-22 7:49 ` BERTRAND Joël
2007-04-22 7:54 ` BERTRAND Joël
2007-04-22 9:01 ` Georg Chini
2007-04-22 9:40 ` David Miller
2007-04-23 8:42 ` BERTRAND Joël
2007-04-23 9:06 ` David Miller
2007-04-23 9:08 ` David Miller
2007-04-24 8:01 ` BERTRAND Joël
2007-04-24 8:05 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='06af01c7807a$c598a830$84163e05@kroptech.com' \
--to=akropel1@rochester.rr.com \
--cc=sparclinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.