From: "Sönke Ruempler" <ruempler@topconcepts.com>
To: <linux-kernel@vger.kernel.org>
Subject: reiserfs bug
Date: Thu, 28 Nov 2002 09:28:47 +0100 [thread overview]
Message-ID: <072801c296b8$2cb01000$6600a8c0@topconcepts.net> (raw)
[-- Attachment #1: Type: text/plain, Size: 10543 bytes --]
kernel oops while writing through sbp2 to ieee1394 ide reiserfs-formated
device
i am NOT on the list, pls CC me!
trace:
kernel BUG at prints.c:334!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c0174d69>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: 00000024 ebx: c0259c00 ecx: cf51a000 edx: cf51bf64
esi: cc7f6c00 edi: ce2cb6c0 ebp: 00000003 esp: c12f1ea0
ds: 0018 es: 0018 ss: 0018
Process kupdated (pid: 7, stackpage=c12f1000)
Stack: c024e755 c02e0120 c0259c00 c12f1ec4 d0923830 00000000 c017f13d
cc7f6c00
c0259c00 00000000 00000014 ce2cb6c0 d093aaf4 c0131268 c023fa4d
cb66a000
d0923000 00000013 00000010 00000004 c0182b4b cc7f6c00 d0923830
00000001
Call Trace: [<c017f13d>] [<c0131268>] [<c023fa4d>] [<c0182b4b>]
[<c0181d40>]
[<c0181d4e>] [<c01725d5>] [<c0133eee>] [<c01334bc>] [<c013374c>]
[<c0105000>]
[<c0105000>] [<c0106ff6>] [<c0133670>]
Code: 0f 0b 4e 01 e2 0f 25 c0 85 f6 68 20 01 2e c0 74 0d 0f b7 46
>>EIP; c0174d69 <reiserfs_panic+29/60> <=====
Trace; c017f13d <flush_commit_list+2bd/3b0>
Trace; c0131268 <getblk+18/40>
Trace; c023fa4d <_mmx_memcpy+4d/150>
Trace; c0182b4b <do_journal_end+7eb/af0>
Trace; c0181d40 <flush_old_commits+130/160>
Trace; c0181d4e <flush_old_commits+13e/160>
Trace; c01725d5 <reiserfs_write_super+15/20>
Trace; c0133eee <sync_supers+be/e0>
Trace; c01334bc <sync_old_buffers+c/40>
Trace; c013374c <kupdate+dc/100>
Trace; c0105000 <_stext+0/0>
Trace; c0105000 <_stext+0/0>
Trace; c0106ff6 <kernel_thread+26/30>
Trace; c0133670 <kupdate+0/100>
Code; c0174d69 <reiserfs_panic+29/60>
00000000 <_EIP>:
Code; c0174d69 <reiserfs_panic+29/60> <=====
0: 0f 0b ud2a <=====
Code; c0174d6b <reiserfs_panic+2b/60>
2: 4e dec %esi
Code; c0174d6c <reiserfs_panic+2c/60>
3: 01 e2 add %esp,%edx
Code; c0174d6e <reiserfs_panic+2e/60>
5: 0f 25 (bad)
Code; c0174d70 <reiserfs_panic+30/60>
7: c0 85 f6 68 20 01 2e rolb $0x2e,0x12068f6(%ebp)
Code; c0174d77 <reiserfs_panic+37/60>
e: c0 (bad)
Code; c0174d78 <reiserfs_panic+38/60>
f: 74 0d je 1e <_EIP+0x1e> c0174d87
<reiserfs_panic+47/60>
Code; c0174d7a <reiserfs_panic+3a/60>
11: 0f b7 46 00 movzwl 0x0(%esi),%eax
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux blah 2.4.19 #1 Die Aug 13 10:01:16 CEST 2002 i686 unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.11.90.0.8
util-linux 2.11f
mount 2.11g
modutils 2.4.6
e2fsprogs 1.23
reiserfsprogs 3.x.0j
isdn4k-utils 3.1pre1
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.60
Console-tools 0.3.3
Sh-utils 2.0.11
Modules Loaded sbp2 smbfs nls_iso8859-1 isofs lp
Linux version 2.4.19 (root@blah) (gcc version 2.96 20000731 (Red Hat Linux
7.1 2.96-98)) #1 Die Aug 13 10:01:16 CEST 2002
cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 3
model name : AMD Duron(tm) Processor
stepping : 1
cpu MHz : 706.989
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36
mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1409.02
modules:
sbp2 15904 1
smbfs 32144 1 (autoclean)
nls_iso8859-1 2832 0 (autoclean)
isofs 17296 0 (autoclean)
lp 5968 0 (autoclean)
ipports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0140-015f : aha152x
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
b000-bfff : PCI Bus #01
d800-d803 : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller
da00-da1f : AVM Audiovisuelles MKTG & Computer System GmbH B1 ISDN
da00-da1e : b1pci-da00
dc00-dc3f : AVM Audiovisuelles MKTG & Computer System GmbH B1 ISDN
de00-deff : Macronix, Inc. [MXIC] MX987x5
de00-deff : tulip
f000-f00f : Advanced Micro Devices [AMD] AMD-756 [Viper] IDE
f000-f007 : ide0
f008-f00f : ide1
iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-0024371c : Kernel code
0024371d-002978bf : Kernel data
0fff0000-0fff7fff : ACPI Tables
0fff8000-0fffffff : ACPI Non-volatile Storage
e6c00000-e6cfffff : PCI Bus #01
e8000000-ebffffff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller
eedff000-eedfffff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller
eee00000-eeefffff : PCI Bus #01
ef7e8000-ef7ebfff : Texas Instruments TSB12LV26 IEEE-1394 Controller (Link)
ef7ee000-ef7eefff : Advanced Micro Devices [AMD] AMD-756 [Viper] USB
ef7ef000-ef7ef7ff : Texas Instruments TSB12LV26 IEEE-1394 Controller (Link)
ef7ef000-ef7ef7ff : ohci1394
ef7efec0-ef7efeff : AVM Audiovisuelles MKTG & Computer System GmbH B1 ISDN
ef7eff00-ef7effff : Macronix, Inc. [MXIC] MX987x5
ef7eff00-ef7effff : tulip
ef800000-efffffff : S3 Inc. 86c764/765 [Trio32/64/64V+]
ffff0000-ffffffff : reserved
lspci -vvv:
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller (rev 25)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 120
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at eedff000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at d800 [disabled] [size=4]
Capabilities: [a0] AGP version 1.0
Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x1
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP
Bridge (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 120
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: eee00000-eeefffff
Prefetchable memory behind bridge: e6c00000-e6cfffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA (rev
01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE (rev
07) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at f000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB
(rev 06) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 16 (20000ns max), cache line size 08
Interrupt: pin D routed to IRQ 12
Region 0: Memory at ef7ee000 (32-bit, non-prefetchable) [size=4K]
00:08.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH
B1 ISDN (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 500ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ef7efec0 (32-bit, non-prefetchable) [size=64]
Region 1: I/O ports at dc00 [size=64]
Region 2: I/O ports at da00 [size=32]
00:09.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8020
(prog-if 10 [OHCI])
Subsystem: Texas Instruments: Unknown device 8010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at ef7ef000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at ef7e8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Ethernet controller: Macronix, Inc. [MXIC] MX987x5 (rev 20)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at de00 [size=256]
Region 1: Memory at ef7eff00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at ef7d0000 [disabled] [size=64K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1+,D2-,D3hot-,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+]
(prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 12
Region 0: Memory at ef800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at ef7f0000 [disabled] [size=64K]
have fun!
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 2436 bytes --]
next reply other threads:[~2002-11-28 8:21 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-28 8:28 Sönke Ruempler [this message]
2002-11-28 8:47 ` reiserfs bug Oleg Drokin
2002-11-28 8:50 ` Sonke Ruempler
2002-11-28 8:50 ` Sonke Ruempler
2002-11-28 8:57 ` Oleg Drokin
2002-11-28 9:04 ` Sonke Ruempler
2002-11-28 9:04 ` Sonke Ruempler
2002-11-28 9:09 ` Oleg Drokin
2002-11-28 9:12 ` Sonke Ruempler
2002-11-28 9:12 ` Sonke Ruempler
2002-11-28 9:13 ` Henning P. Schmiedehausen
2002-11-28 10:03 ` Oleg Drokin
-- strict thread matches above, loose matches on Subject: below --
2013-12-04 7:07 Reiserfs bug Shaun Robinson
2005-01-22 23:26 reiserfs bug Pablo Barbáchano
2005-01-23 11:13 ` Pablo Barbáchano
2004-07-01 6:09 Hongwei Li
2004-07-01 7:10 ` Vladimir V. Saveliev
2004-07-01 20:44 ` Oleg Drokin
2004-10-05 15:01 ` Vladimir Saveliev
2002-04-22 10:17 ReiserFS BUG Anders Widman
2002-04-22 10:42 ` Vitaly Fertman
[not found] ` <200204221242483.SM00415@thebsh.namesys.com>
2002-04-22 16:14 ` Anders Widman
2002-04-23 0:43 ` Anders Widman
2002-04-22 10:11 Anders Widman
2001-10-08 16:44 ReiserFS Bug Aleksander Adamowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='072801c296b8$2cb01000$6600a8c0@topconcepts.net' \
--to=ruempler@topconcepts.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.