From: "Nai-Hsien" <dennis@loop.com.tw>
To: lartc@vger.kernel.org
Subject: [LARTC] point-to-point ethernet link
Date: Mon, 15 May 2006 10:50:00 +0000 [thread overview]
Message-ID: <075f01c6780d$50a49870$0102000a@loop.com.tw> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 961 bytes --]
I have an embedded linux board (main board), which has multiple Ethernet interfaces, and
a daughter card, which has one Ethernet interface. The diagram is shown as following.
+---------+ +----------------------------+
| daughter |--------------------| ptp |----------------
| card | Ethernet | Main board |---------------- Ethernet links with IP
+---------+ | |---------------- addresses
+----------------------------+
I am looking for a method to manage the daughter card with single IP address. I tried to build
a point-to-point Ethernet link on main board. However, it does not work.
Is there any solution to route packets to ptp port while the ptp port does not have an IP address?
[-- Attachment #1.2: Type: text/html, Size: 3315 bytes --]
[-- Attachment #2: Type: text/plain, Size: 143 bytes --]
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
next reply other threads:[~2006-05-15 10:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-15 10:50 Nai-Hsien [this message]
2006-05-15 19:26 ` [LARTC] point-to-point ethernet link Antonio Di Bacco
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='075f01c6780d$50a49870$0102000a@loop.com.tw' \
--to=dennis@loop.com.tw \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.