All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
To: Vinod Koul <vkoul@kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Johan Hovold <johan@kernel.org>
Cc: linux-phy@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] phy: omap-usb2: add explicit PHY comparator API
Date: Thu, 27 Aug 2026 09:13:28 +0300	[thread overview]
Message-ID: <09b589a1-2661-4365-a87e-ebb871e52f0d@gmail.com> (raw)
In-Reply-To: <20260722053618.602702-1-ivo.g.dimitrov.75@gmail.com>

Gentle ping on this patch. It's been about five weeks since v1, and I 
haven't seen any feedback yet.

The patch is still applicable to current linux-next. Please let me know 
if the approach looks reasonable, or if there are any concerns I should 
address.

Thanks,
Ivo

On 22.07.26 г. 8:36 ч., Ivaylo Dimitrov wrote:
> The existing omap_usb2_set_comparator() API locates the OMAP USB2 PHY
> instance by calling usb_get_phy(USB_PHY_TYPE_USB2), assuming there is a
> single USB2 PHY registered in the system.
> 
> This assumption no longer holds on systems with multiple USB2 PHY
> providers. In such cases, the global lookup may return a different USB2
> PHY instance, causing the OMAP driver to perform an invalid container_of()
> conversion when accessing its private data.
> 
> Introduce omap_usb2_set_phy_comparator(), allowing callers to explicitly
> specify the OMAP USB2 PHY instance to associate with a phy_companion.
> The new helper validates that the supplied USB PHY is an OMAP USB2 PHY
> before accessing its private data.
> 
> The existing omap_usb2_set_comparator() API is kept unchanged for
> existing users.
> 
> 
> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
> ---
>   drivers/phy/ti/phy-omap-usb2.c | 32 ++++++++++++++++++++++++++++++++
>   include/linux/phy/omap_usb.h   |  7 +++++++
>   2 files changed, 39 insertions(+)
> 
> diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
> index 1eb252604441..ac31b693fce7 100644
> --- a/drivers/phy/ti/phy-omap-usb2.c
> +++ b/drivers/phy/ti/phy-omap-usb2.c
> @@ -70,6 +70,8 @@ struct omap_usb {
>   
>   #define	phy_to_omapusb(x)	container_of((x), struct omap_usb, phy)
>   
> +static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host);
> +
>   struct usb_phy_data {
>   	const char *label;
>   	u8 flags;
> @@ -113,6 +115,36 @@ int omap_usb2_set_comparator(struct phy_companion *comparator)
>   }
>   EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
>   
> +/**
> + * omap_usb2_set_phy_comparator() - associate a comparator with an OMAP USB2 PHY
> + *
> + * @omap_phy: OMAP USB2 PHY instance
> + * @comparator: companion PHY providing comparator operations
> + *
> + * The phy companion driver should call this API with the companion PHY
> + * implementation containing the callbacks required by @omap_phy.
> + *
> + * For use by phy companion drivers.
> + */
> +int omap_usb2_set_phy_comparator(struct usb_phy *omap_phy,
> +				 struct phy_companion *comparator)
> +{
> +	struct omap_usb	*phy;
> +
> +	if (!omap_phy)
> +		return -EINVAL;
> +
> +	if (WARN_ON(!omap_phy->otg ||
> +		    omap_phy->otg->set_host != omap_usb_set_host))
> +		return -EINVAL;
> +
> +	phy = phy_to_omapusb(omap_phy);
> +	phy->comparator = comparator;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(omap_usb2_set_phy_comparator);
> +
>   static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
>   {
>   	struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
> diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h
> index e23b52df93ec..96f9792c6ce6 100644
> --- a/include/linux/phy/omap_usb.h
> +++ b/include/linux/phy/omap_usb.h
> @@ -15,11 +15,18 @@
>   
>   #if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE)
>   extern int omap_usb2_set_comparator(struct phy_companion *comparator);
> +extern int omap_usb2_set_phy_comparator(struct usb_phy *omap_phy,
> +					struct phy_companion *comparator);
>   #else
>   static inline int omap_usb2_set_comparator(struct phy_companion *comparator)
>   {
>   	return -ENODEV;
>   }
> +static inline int omap_usb2_set_phy_comparator(struct usb_phy *omap_phy,
> +					       struct phy_companion *comparator)
> +{
> +	return -ENODEV;
> +}
>   #endif
>   
>   #endif /* __DRIVERS_OMAP_USB_H */

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2026-08-27  6:13 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-22  5:36 [PATCH] phy: omap-usb2: add explicit PHY comparator API Ivaylo Dimitrov
2026-07-22  5:36 ` Ivaylo Dimitrov
2026-07-22  5:48 ` sashiko-bot
2026-08-27  6:13 ` Ivaylo Dimitrov [this message]
2026-08-27 15:51 ` Vinod Koul
2026-08-31 16:14   ` Ivaylo Dimitrov
2026-10-03 20:20     ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=09b589a1-2661-4365-a87e-ebb871e52f0d@gmail.com \
    --to=ivo.g.dimitrov.75@gmail.com \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=neil.armstrong@linaro.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.