From: Ruedi.Hofer@ascom.ch
To: linuxppc-embedded@lists.linuxppc.org
Cc: erammsu@kieraypc01.p.y.ki.era.ericsson.se,
kernel@linux01.hasler.ascom.ch
Subject: Re: PCMCIA support for 860
Date: Wed, 05 Apr 2000 17:21:20 +0100 (CED) [thread overview]
Message-ID: <0FSJ00F9FUON1E@pmdf-it.hasler.ascom.ch> (raw)
[-- Attachment #1: Type: TEXT/PLAIN, Size: 908 bytes --]
Hi
Thanx for all the support. I've added now Marcus' patchfiles.
Compiling works fine now.
Unfortunately, when I enable the IDE stuff in the kernel config
(Block devices -> Enhanced IDE support)
it won't boot anymore!
Why?
Is there something else necessary in the kernel config?
(As mentioned in the patch, I've disabled
MPC8xx CPM options -> Configure IDE driver for ATA on PCMCIA....
The kernel output:
entry 0x100000, phoff 0x34, shoff 0x829fc
phnum 0x1, shnum 0x9
p_offset 0x10000, p_vaddr 0x100000, p_paddr 0x100000
p_filesz 0x530c, p_memsz 0xb1cc
Loading at 0x10c000
Starting 0x11c000
loaded at: 0011C000 001271CC
relocated to: 00100000 0010B1CC
board data at: 01FF0000 01FF001C
relocated to: 0010C100 0010C11C
zimage at: 00122000 0018E9C0
avail ram: 0018F000 02000000
Linux/PPC load:
Uncompressing Linux...done.
Now booting the kernel
<crash><crash><crash><crash><crash>
Ruedi
next reply other threads:[~2000-04-05 16:21 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-04-05 16:21 Ruedi.Hofer [this message]
2000-04-06 9:07 ` PCMCIA support for 860 Marcus Sundberg
-- strict thread matches above, loose matches on Subject: below --
2000-05-23 9:58 Shuangjun Zhu
2000-05-22 9:24 Shuangjun Zhu
2000-05-19 8:35 Shuangjun Zhu
2000-04-06 10:39 Ruedi.Hofer
2000-04-06 12:23 ` Marcus Sundberg
2000-04-04 11:52 Ruedi Hofer
2000-04-04 13:23 ` Marcus Sundberg
2000-04-04 9:49 Ruedi Hofer
2000-04-04 11:54 ` Marcus Sundberg
2000-04-04 23:33 ` Dan Malek
2000-04-03 7:55 Ruedi.Hofer
2000-04-03 17:01 ` Marcus Sundberg
2000-04-03 19:55 ` Dan Malek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0FSJ00F9FUON1E@pmdf-it.hasler.ascom.ch \
--to=ruedi.hofer@ascom.ch \
--cc=erammsu@kieraypc01.p.y.ki.era.ericsson.se \
--cc=kernel@linux01.hasler.ascom.ch \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.