From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Fjellstrom Subject: Re: rawmidi problem (was Re: ALSA homepage redesign) Date: Tue, 23 Apr 2002 01:54:22 -0600 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <0GV000LJSGHPTE@l-daemon> References: <0GUZ00E0JTREEW@l-daemon> <1104.217.124.10.68.1019544885.squirrel@iuamtg.upf.es> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 7BIT Return-path: In-Reply-To: <1104.217.124.10.68.1019544885.squirrel@iuamtg.upf.es> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: mdeboer@iua.upf.es Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On April 23, 2002 12:54 am, you wrote: > Last time I tried, rawmidi worked for me, on hw:0,1 > You shouldn't need the snd-virmidi device, just the > snd-emu10k1 will do. Exactly what version of alsa-driver > are you using? 0.9.0beta12 > Anyway, because playing through the sequencer _does_ work, > you could indeed load the snd-virmidi device as well, > use aconnect to connect a virmidi sequencer port to the > emu10k1 synth sequencer port, and use hw:1,0 (in case > that the virmidi is your second card). On monday (at > work, where I have the SBLive! installed), I will send > you my configuration (modules.conf), and the exact > aconnect parameters. Thanks. > But then again, just rawmidi -o hw:0,1 should work. > Unfortunatly it does not... Im using the same settings I used for a previous version of alsa 0.9.0, and had rawmidi working... -- Thomas Fjellstrom tfjellstrom@shaw.ca http://strangesoft.net