From: Jaehoon Chung <jh80.chung@gmail.com>
To: Mark Kettenis <mark.kettenis@xs4all.nl>,
Jaehoon Chung <jh80.chung@samsung.com>
Cc: kettenis@openbsd.org, u-boot@lists.denx.de, sjg@chromium.org
Subject: Re: [PATCH 0/3] Apple M1 power management controller support
Date: Wed, 22 Dec 2021 18:56:18 +0900 [thread overview]
Message-ID: <0c11af3c-b37f-cd7e-a200-e5f99d360c7a@gmail.com> (raw)
In-Reply-To: <d3cb676e798b8fd8@bloch.sibelius.xs4all.nl>
Hi Mark,
On 12/21/21 5:30 PM, Mark Kettenis wrote:
>> From: Jaehoon Chung <jh80.chung@samsung.com>
>> Date: Tue, 21 Dec 2021 08:00:38 +0900
> Hello Jaehoon,
>
>> Dear Mark,
>>
>> On 12/7/21 4:03 AM, Mark Kettenis wrote:
>>> This series adds support for the power management controller found on
>>> Apple SoCs based on the device tree bindings submitted to upstream
>>> Linux. This is needed to enable power domains for devices that
>>> haven't been enabled by earlier boot stages.
>> Is there any patch before applied this patchset?
> This is based on next, with the watchdog patch applied:
>
> https://patchwork.ozlabs.org/project/uboot/list/?series=271919
>
> The drivers are independent, but I suppose you get conflicts in
> Kconfig and maybe the device tree without that series applied.
Thanks for sharing information. I will check on next branch.
Best Regards,
Jaehoon Chung
>
> Cheers,
>
> Mark
>
>>>
>>> Mark Kettenis (3):
>>> arm: dts: apple: Update Apple M1 device trees
>>> arm: dts: apple: Add u-boot,dm-pre-reloc properties
>>> power: domain: Add Apple pmgr driver
>>>
>>> arch/arm/Kconfig | 4 +
>>> arch/arm/dts/Makefile | 5 +-
>>> arch/arm/dts/t8103-j274-u-boot.dtsi | 1 +
>>> arch/arm/dts/t8103-j274.dts | 122 +--
>>> arch/arm/dts/t8103-j293-u-boot.dtsi | 1 +
>>> arch/arm/dts/t8103-j293.dts | 92 +--
>>> arch/arm/dts/t8103-j313-u-boot.dtsi | 1 +
>>> arch/arm/dts/t8103-j313.dts | 57 ++
>>> arch/arm/dts/t8103-j456-u-boot.dtsi | 1 +
>>> arch/arm/dts/t8103-j456.dts | 71 ++
>>> arch/arm/dts/t8103-j457-u-boot.dtsi | 1 +
>>> arch/arm/dts/t8103-j457.dts | 59 ++
>>> arch/arm/dts/t8103-jxxx.dtsi | 140 ++++
>>> arch/arm/dts/t8103-pmgr.dtsi | 1136 +++++++++++++++++++++++++++
>>> arch/arm/dts/t8103-u-boot.dtsi | 25 +
>>> arch/arm/dts/t8103.dtsi | 585 +++++++-------
>>> drivers/mailbox/Kconfig | 9 +
>>> drivers/mailbox/Makefile | 1 +
>>> drivers/power/domain/Kconfig | 8 +
>>> drivers/power/domain/Makefile | 1 +
>>> drivers/power/domain/apple-pmgr.c | 113 +++
>>> 21 files changed, 2005 insertions(+), 428 deletions(-)
>>> create mode 100644 arch/arm/dts/t8103-j274-u-boot.dtsi
>>> create mode 100644 arch/arm/dts/t8103-j293-u-boot.dtsi
>>> create mode 100644 arch/arm/dts/t8103-j313-u-boot.dtsi
>>> create mode 100644 arch/arm/dts/t8103-j313.dts
>>> create mode 100644 arch/arm/dts/t8103-j456-u-boot.dtsi
>>> create mode 100644 arch/arm/dts/t8103-j456.dts
>>> create mode 100644 arch/arm/dts/t8103-j457-u-boot.dtsi
>>> create mode 100644 arch/arm/dts/t8103-j457.dts
>>> create mode 100644 arch/arm/dts/t8103-jxxx.dtsi
>>> create mode 100644 arch/arm/dts/t8103-pmgr.dtsi
>>> create mode 100644 arch/arm/dts/t8103-u-boot.dtsi
>>> create mode 100644 drivers/power/domain/apple-pmgr.c
>>>
>>
next prev parent reply other threads:[~2021-12-22 9:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20211206190321epcas1p4d6818c609bb81f779ec2e8b14a951c0b@epcas1p4.samsung.com>
2021-12-06 19:03 ` [PATCH 0/3] Apple M1 power management controller support Mark Kettenis
2021-12-06 19:03 ` [PATCH 1/3] arm: dts: apple: Update Apple M1 device trees Mark Kettenis
2021-12-06 19:03 ` [PATCH 2/3] arm: dts: apple: Add u-boot,dm-pre-reloc properties Mark Kettenis
2021-12-06 19:03 ` [PATCH 3/3] power: domain: Add Apple pmgr driver Mark Kettenis
2021-12-20 23:00 ` [PATCH 0/3] Apple M1 power management controller support Jaehoon Chung
2021-12-21 8:30 ` Mark Kettenis
2021-12-22 9:56 ` Jaehoon Chung [this message]
2021-12-23 21:37 ` Mark Kettenis
2021-12-29 1:50 ` Jaehoon Chung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0c11af3c-b37f-cd7e-a200-e5f99d360c7a@gmail.com \
--to=jh80.chung@gmail.com \
--cc=jh80.chung@samsung.com \
--cc=kettenis@openbsd.org \
--cc=mark.kettenis@xs4all.nl \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.