From: Ryan Bradetich <ryan_bradetich@uswest.net>
To: Aaron Macks <aaronm@cs.brandeis.edu.ml.to>
Cc: parisc-linux@lists.parisc-linux.org
Subject: Re: [parisc-linux] 755/125 problems
Date: 18 Nov 2001 11:24:53 -0700 [thread overview]
Message-ID: <1006107893.4898.5.camel@beavis> (raw)
In-Reply-To: <a05100316b81d8d1c41f3@[129.64.46.46]>
On Sun, 2001-11-18 at 09:11, Aaron Macks wrote:
> So I finally have a viable system in the form of a 755/125(384mb ram,
> internal FWscsi drive and 2 atm cards). I can get it to boot under
> the HPUX still installed on the HD, and it seems to work(not root
> pw). I tried booting it off the internal CD with the 0.92 disc and
> it seemed to freeze at the 'Branching to kernel address .....".
> Three questions:
> Is this common or an oddity with my system?
The 755 (and 735) are only partially supported at this time. The
fast-wide disks are behind an outfield card which is not supported yet,
so you can not use the FW disks. It has been a long time since I
installed the 0.9.2 iso, but I have tested tested the rc1 of the
upcoming 0.9.3 iso on the 755 and it installed fine :)
> It currently only allows a net boot off of the ATM cards, either the
> EISA or the slider. How can I force it to use the onboard 10 base
> T(AUI) or even 10 Base 2?
I have not run into this one yet, and I did a network install of the 755
using the built-in 10 base-T. I will see if I can find an additional
EISA network card to add to the machine and see if I can duplicate your
problem.
> The other might be slightly off topic, but is there an easy way to
> reset the root pw on the HPUX install?(I believe I have HPUX install
> media somewhere but I'm probably wrong.)
yeah, boot into the hpux isl menu:
boot pri isl
when in the isl menu
hpux -is
will put you in single user mode where you can change the root passwd.
- Ryan
> Aaron
> --
> _______________________________________________________
> Aaron Macks(aaronm@cs.brandeis.edu)
> My sheep has seven gall bladders, that makes me the King of the Universe!
>
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
>
next prev parent reply other threads:[~2001-11-19 13:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-11-18 16:11 [parisc-linux] 755/125 problems Aaron Macks
2001-11-18 18:24 ` Ryan Bradetich [this message]
2001-11-18 19:34 ` Aaron Macks
2001-11-19 5:18 ` Ryan Bradetich
2001-11-19 15:43 ` Aaron Macks
2001-11-19 17:06 ` Eric Schnoebelen
2001-11-19 9:30 ` Richard Hirst
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1006107893.4898.5.camel@beavis \
--to=ryan_bradetich@uswest.net \
--cc=aaronm@cs.brandeis.edu.ml.to \
--cc=parisc-linux@lists.parisc-linux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.