From mboxrd@z Thu Jan 1 00:00:00 1970 Subject: Re: [linux-lvm] Can someone _please_ tell me whats going on? From: Bradley Alexander In-Reply-To: References: Content-Transfer-Encoding: 7bit Message-Id: <1008560587.831.6.camel@defiant> Mime-Version: 1.0 Sender: linux-lvm-admin@sistina.com Errors-To: linux-lvm-admin@sistina.com Reply-To: linux-lvm@sistina.com List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: Date: Sun Dec 16 21:41:02 2001 List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-lvm@sistina.com On Sun, 2001-12-16 at 22:13, Friedrich Lobenstock wrote: > On 16 Dec 2001 21:57, Bradley Alexander wrote: > > > hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } > > hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=211681280, > > sector=0 > > hdc: DMA disabled > > hdd: DMA disabled > > ide1: reset: success > > This looks like a IDE-cable problem to me. Checked the length? > Is it really a ATA66/100 cable? Do you use a drive cage? Its a standard IDE cable. I have a 40-pin/40-wire cable and a 40-pin/80-wire (I'm assuming this is an ATA66/100 cable). Originally, i had both drives on the ATA cable, but since I split them to different channels, I had to use a standard IDE cable on the second channel. However, I was getting the same errors when both were on the ATA cable as well. -- --Brad ============================================================================ Bradley M. Alexander, CISSP | Co-Chairman, Beowulf System Admin/Security Specialist | NoVALUG/DCLUG Security SIG Debian/GNU Linux Developer | storm [at] debian.org | storm [at] tux.org ============================================================================ It's always a good idea to keep the pointy end going forward as much as possible. --Rules of the Air, #21