From mboxrd@z Thu Jan 1 00:00:00 1970 Subject: Re: [linux-lvm] Can someone _please_ tell me whats going on? From: Bradley Alexander In-Reply-To: References: Content-Transfer-Encoding: 7bit Message-Id: <1008610700.829.15.camel@defiant> Mime-Version: 1.0 Sender: linux-lvm-admin@sistina.com Errors-To: linux-lvm-admin@sistina.com Reply-To: linux-lvm@sistina.com List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: Date: Mon Dec 17 11:36:02 2001 List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-lvm@sistina.com On Mon, 2001-12-17 at 07:20, Friedrich Lobenstock wrote: > On 16 Dec 2001 22:43, Bradley Alexander wrote: > > > Its a standard IDE cable. I have a 40-pin/40-wire cable and a > > 40-pin/80-wire (I'm assuming this is an ATA66/100 cable). Originally, i > > had both drives on the ATA cable, but since I split them to different > > channels, I had to use a standard IDE cable on the second channel. > > However, I was getting the same errors when both were on the ATA cable > > as well. > > > > So please do yourself a favour and only use 80-wire cables nowadays. > That's why you are getting the > hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } > hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=211681280, sector=0 > messages. I was getting the same type of errors even when both drives were on an ATA cable. However, I will try to run out and get an ATA cable this afternoon. -- --Brad ============================================================================ Bradley M. Alexander, CISSP | Co-Chairman, Beowulf System Admin/Security Specialist | NoVALUG/DCLUG Security SIG Debian/GNU Linux Developer | storm [at] debian.org | storm [at] tux.org ============================================================================ No, just _a_ Zaphod Beeblebrox. Didn't you hear? I come in six-packs."