From: Shawn Starr <spstarr@sh0n.net>
To: Linux <linux-kernel@vger.kernel.org>
Subject: [PROBLEM]: 2.4.18-rc1 - Unable to mount CD-ROM/RW
Date: 21 Feb 2002 12:40:35 -0500 [thread overview]
Message-ID: <1014313262.8811.25.camel@unaropia> (raw)
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MPE3064AT, ATA DISK drive
hdb: WDC AC32500H, ATA DISK drive
hdc: YAMAHA CRW2100E, ATAPI CD/DVD-ROM drive <--------------------
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 12672450 sectors (6488 MB) w/512KiB Cache, CHS=788/255/63, (U)DMA
hdb: Disabling (U)DMA for WDC AC32500H
hdb: 4999680 sectors (2560 MB) w/128KiB Cache, CHS=620/128/63
Partition check:
hda: hda1 hda2
hdb: hdb1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:0c.0: 3Com PCI 3c900 Cyclone 10Mbps TPO at 0xe880. Vers LK1.1.16
PPP generic driver version 2.4.1
PPP Deflate Compression module registered
PPP BSD Compression module registered
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
<Adaptec 2902/04/10/15/20/30C SCSI adapter>
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
Vendor: HP Model: T4000s Rev: 1.10
Type: Sequential-Access ANSI SCSI revision: 02
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: YAMAHA Model: CRW2100E Rev: 1.0N <----------------
Type: CD-ROM ANSI SCSI revision: 02
st: Version 20020205, bufsize 32768, wrt 30720, max init. bufs 4, s/g
segs 16
Attached scsi tape st0 at scsi0, channel 0, id 4, lun 0
When i attempt to mount /dev/cdrom (symlink to /dev/scd0) I get
mount: /dev/cdrom is not a valid block device (or /dev/scd0).
What broke? :-(
Shawn.
next reply other threads:[~2002-02-21 17:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-02-21 17:40 Shawn Starr [this message]
2002-02-21 19:09 ` [PROBLEM]: 2.4.18-rc1 - Unable to mount CD-ROM/RW Matt Reppert
[not found] <LI5YSPXWYTY04431V32LFIF97042TP.3c7534b4@jss>
2002-02-21 18:31 ` Shawn Starr
2002-02-21 19:57 ` Dan Chen
2002-02-21 20:29 ` Shawn Starr
-- strict thread matches above, loose matches on Subject: below --
2002-02-21 19:19 Brenneke, Matthew Jeffrey (UMR-Student)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1014313262.8811.25.camel@unaropia \
--to=spstarr@sh0n.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.