From: "John W. Linville" <linville@tuxdriver.com>
To: linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Cc: jgarzik@pobox.com, john.ronciak@intel.com,
ganesh.venkatesan@intel.com, mallikarjuna.chilakala@intel.com
Subject: [patch netdev-2.6] e1000: Driver version, white space, comments, device id & other
Date: Wed, 19 Oct 2005 10:40:08 -0400 [thread overview]
Message-ID: <10192005104008.17766@bilbo.tuxdriver.com> (raw)
In-Reply-To: <20051019143154.GA16830@tuxdriver.com>
From: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Driver version, white space, comments, device id & other
Originally posted on 8/31 (and perhaps before)...I think it has not
been committed because the patch from that posting was damaged. I'm
reposting to make sure it gets in... :-)
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
drivers/net/e1000/e1000_main.c | 13 +++++++++----
1 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -43,7 +43,7 @@ char e1000_driver_string[] = "Intel(R) P
#else
#define DRIVERNAPI "-NAPI"
#endif
-#define DRV_VERSION "6.0.60-k2"DRIVERNAPI
+#define DRV_VERSION "6.1.16-k2"DRIVERNAPI
char e1000_driver_version[] = DRV_VERSION;
char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
@@ -80,6 +80,9 @@ static struct pci_device_id e1000_pci_tb
INTEL_E1000_ETHERNET_DEVICE(0x1026),
INTEL_E1000_ETHERNET_DEVICE(0x1027),
INTEL_E1000_ETHERNET_DEVICE(0x1028),
+ INTEL_E1000_ETHERNET_DEVICE(0x105E),
+ INTEL_E1000_ETHERNET_DEVICE(0x105F),
+ INTEL_E1000_ETHERNET_DEVICE(0x1060),
INTEL_E1000_ETHERNET_DEVICE(0x1075),
INTEL_E1000_ETHERNET_DEVICE(0x1076),
INTEL_E1000_ETHERNET_DEVICE(0x1077),
@@ -88,10 +91,13 @@ static struct pci_device_id e1000_pci_tb
INTEL_E1000_ETHERNET_DEVICE(0x107A),
INTEL_E1000_ETHERNET_DEVICE(0x107B),
INTEL_E1000_ETHERNET_DEVICE(0x107C),
+ INTEL_E1000_ETHERNET_DEVICE(0x107D),
+ INTEL_E1000_ETHERNET_DEVICE(0x107E),
+ INTEL_E1000_ETHERNET_DEVICE(0x107F),
INTEL_E1000_ETHERNET_DEVICE(0x108A),
INTEL_E1000_ETHERNET_DEVICE(0x108B),
INTEL_E1000_ETHERNET_DEVICE(0x108C),
- INTEL_E1000_ETHERNET_DEVICE(0x1099),
+ INTEL_E1000_ETHERNET_DEVICE(0x109A),
/* required last entry */
{0,}
};
@@ -398,8 +404,7 @@ e1000_down(struct e1000_adapter *adapter
e1000_clean_all_tx_rings(adapter);
e1000_clean_all_rx_rings(adapter);
- /* If WoL is not enabled
- * and management mode is not IAMT
+ /* If WoL is not enabled and management mode is not IAMT
* Power down the PHY so no link is implied when interface is down */
if(!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
adapter->hw.media_type == e1000_media_type_copper &&
next prev parent reply other threads:[~2005-10-19 14:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-19 1:31 [patch 2.6.14-rc4] e1000: Driver version, white space, comments, device id & other John W. Linville
2005-10-19 2:24 ` Jeff Garzik
2005-10-19 14:31 ` John W. Linville
2005-10-19 14:40 ` John W. Linville [this message]
2005-10-20 14:07 ` [patch netdev-2.6] " Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10192005104008.17766@bilbo.tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=ganesh.venkatesan@intel.com \
--cc=jgarzik@pobox.com \
--cc=john.ronciak@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mallikarjuna.chilakala@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.