From: Anton Worshevsky <gbdj@linux.spb.org>
To: Takashi Iwai <tiwai@suse.de>
Cc: p z oooo <pzad@pobox.sk>, alsa-devel@lists.sourceforge.net
Subject: Re: VIA 8233A, 8235 with ALC650 codec
Date: Tue, 18 Feb 2003 07:43:26 +0300 [thread overview]
Message-ID: <10321.030218@linux.spb.org> (raw)
In-Reply-To: s5hel6g4hv0.wl@alsa2.suse.de
[-- Attachment #1: Type: text/plain, Size: 1827 bytes --]
Dear Takashi Iwai,
Monday, February 10, 2003, 12:14:59 PM, you wrote:
>> When I changed VIA_REV_8233A to TYPE_VIA8233A my onboard soundcard
>> (VIA8233A + ALC650) works (2 channel, 4 cannel).
>>
>> 5.1 has problem - swaped channels. (LF, RF, Center - OK, LS - Woofer,
>> RS - LS, Woofer - RS.
TI> which program are you using?
TI> please check the ac97 register 0x6a in /proc/asound/card0/ac97#0regs
TI> and whether the bits 30-31 (zero-based) are off.
Do you mean bit 14-15 ?
As i posted before, i have similar channel swapping with VIA8235 + ALC650.
If bits 14-15 (slot modify) set to 0 - channels has incorrect placement.
It can be fixed by exchanging Rear and Center/LFE jacks.
When i set bit 14 to 1 - OK
Surely via8235 transmit multi-channel data in AC-Link in 3,4,6,9,7,8 order,
instead of 3,4,7,8,6,9 as specified in AC97.
I switch codec to 3,4,6,9,7,8 mode by setting bit 14 with following patch
in attachment for ac97_patch.c.
Other option is to apply may old patch to via82xx.c like this:
812,813c812,815
< case 5: slots = (1<<0) | (2<<4) | (5<<8) | (3<<12) | (4<<16); break;
< case 6: slots = (1<<0) | (2<<4) | (5<<8) | (6<<12) | (3<<16) | (4<<20); break;
---
> // case 5: slots = (1<<0) | (2<<4) | (5<<8) | (3<<12) | (4<<16); break;
> // case 6: slots = (1<<0) | (2<<4) | (5<<8) | (6<<12) | (3<<16) | (4<<20); break;
> case 5: slots = (1<<0) | (2<<4) | (3<<8) | (4<<12) | (5<<16); break;
> case 6: slots = (1<<0) | (2<<4) | (3<<8) | (4<<12) | (5<<16) | (6<<20); break;
We can't do this if there are any positive reports for 5.1 playback on via82xx.
May be better to create a new ALC650 specific mixer switch for bit 14 of 0x6a register ?
By this way we can solve all such future problems too.
Please commit one of this solutions to cvs.
Sincerely yours
Anton Worshevsky
[-- Attachment #2: ac97_patch.c.diff --]
[-- Type: application/octet-stream, Size: 519 bytes --]
--- /usr/src/alsa/ac97_patch.c 2003-01-28 14:35:53.000000000 +0300
+++ /usr/src/alsa/alsa-20030210/alsa-kernel/pci/ac97/ac97_patch.c 2003-02-10 07:26:45.000000000 +0300
@@ -365,7 +365,8 @@
ac97->ext_id &= ~AC97_EI_SPDIF; /* disable extended-id */
val = snd_ac97_read(ac97, AC97_ALC650_MULTICH);
- val &= ~0xc000; /* slot: 3,4,7,8,6,9 */
+ // val &= ~0xc000; /* slot: 3,4,7,8,6,9 */
+ val |= 0x4000; /* slot: 3,4,6,9,7,8 */
snd_ac97_write_cache(ac97, AC97_ALC650_MULTICH, val | 0x03);
/* full DAC volume */
next prev parent reply other threads:[~2003-02-18 4:43 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-02-10 6:21 VIA 8233A p z oooo
2003-02-10 8:21 ` VIA 8233A - Patch included Tais M. Hansen
2003-02-10 9:14 ` VIA 8233A Takashi Iwai
2003-02-18 4:43 ` Anton Worshevsky [this message]
2003-02-18 17:03 ` VIA 8233A, 8235 with ALC650 codec Takashi Iwai
2003-02-20 2:51 ` Anton Worshevsky
2003-02-20 9:08 ` Takashi Iwai
2003-02-23 21:50 ` Anton Worshevsky
2003-02-25 17:00 ` Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2003-02-19 6:51 p z oooo
2003-02-19 9:22 ` Takashi Iwai
[not found] ` <000d01c2d7fb$4f521de0$8601a8c0@ZUBAJPNEW>
2003-02-19 10:04 ` Takashi Iwai
2003-02-20 6:19 p z oooo
2003-02-20 9:06 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10321.030218@linux.spb.org \
--to=gbdj@linux.spb.org \
--cc=alsa-devel@lists.sourceforge.net \
--cc=pzad@pobox.sk \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.