From: Raymond Leach <raymondl@knowledgefactory.co.za>
To: louie miranda <lmiranda@chikka.com>
Cc: Netfilter Mailing List <netfilter@lists.netfilter.org>
Subject: Re: portfw on iptables 2.4 kernel problem.
Date: 11 Dec 2002 08:20:06 +0200 [thread overview]
Message-ID: <1039587605.1714.131.camel@rayw.knowledgefactory.co.za> (raw)
In-Reply-To: <00d301c2a0db$c8c2b240$0b00000a@nocpc3>
[-- Attachment #1: Type: text/plain, Size: 4277 bytes --]
Here are the rules I use for ftp outbound from my internal network :
IPTABLES="/usr/sbin/iptables"
NET_INT="10.0.0.0/24"
IFACE_INET="eth0"
IFACE_INT="eth2"
IFACE_DMZ="eth1"
IFACE_LOC="lo"
$ip="10.0.0.67" # My workstation ip
$IPTABLES -A FORWARD -i $IFACE_INT -p tcp --dport 20:21 -s $ip -m state
--state NEW,ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $IFACE_INT -p tcp --dport 1024: -s $ip
-m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $IFACE_INT -p udp --dport 1024: -s $ip
-m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $IFACE_INET -p tcp --sport 20:21 -d $ip -m state
--state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $IFACE_INET -p tcp --sport 1024: -d $ip
-m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $IFACE_INET -p udp --sport 1024: -d $ip
-m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -t nat -A POSTROUTING -o $IFACE_INET -p tcp --dport 20:21 -s
$ip -j SNAT --to-source $IP_INET
$IPTABLES -t nat -A POSTROUTING -o $IFACE_INET -p tcp --dport
1024: -s $ip -j SNAT --to-source $IP_INET
Enjoy!
Ray
On Wed, 2002-12-11 at 08:08, louie miranda wrote:
> Hi, thanks for all your replies, etc. But my problem is not yet solved. I
> dont know why?!
> Can someone give me how did they did it?
>
>
>
> --
> thanks,
> louie miranda
>
>
> ----- Original Message -----
> From: "Jozsef Kadlecsik" <kadlec@blackhole.kfki.hu>
> To: "Raymond Leach" <raymondl@knowledgefactory.co.za>
> Cc: <rsterenborg@xs4all.nl>; "'Paulo Andre'" <pandre@darkstar.nom.za>;
> "'louie miranda'" <lmiranda@chikka.com>; "'netfilter'"
> <netfilter@lists.netfilter.org>
> Sent: Tuesday, December 10, 2002 7:22 PM
> Subject: RE: portfw on iptables 2.4 kernel problem.
>
>
> > On 10 Dec 2002, Raymond Leach wrote:
> >
> > > Yes, you do. Port 20 (and/or any other) connections after the control
> > > connection are not 'RELATED, ESTABLISHED' to the control connection.
> > > They are new connections either from the client to the server or vice
> > > versa. You therefore need seperate rules for them.
> >
> > If we are speaking about the data channels of the supported protocols
> > (FTP, IRC and all the other protocols from p-o-m), then this is absolutely
> > false.
> >
> > > Remember connection tracking happens at a pakcet level, i.e all states
> > > relate to packets of a connection, not per protocol.
> >
> > In the case of the supported protocols with additional channels, again,
> > untrue. Please do no spread false info! Why would then the RELATED state
> > exist?
> >
> > > > However, I'm not sure if it's better to split them up into 2 rules :
> > > > iptables -A FORWARD -i eth0 -o eth1 -p tcp --dport 21 -m state --state
> > > > NEW -j ACCEPT
> > > > iptables -A FORWARD -i eth0 -o eth1 -m state --state
> ESTABLISHED,RELATED
> > > > -j ACCEPT
> >
> > Because the destination port of the data channels cannot be port 21,
> > therefore you must use two rules. And because you specify the
> > incoming/outgoing interfaces, you need a third rule for the reply packets
> > as well.
> >
> > Regards,
> > Jozsef
> > -
> > E-mail : kadlec@blackhole.kfki.hu, kadlec@sunserv.kfki.hu
> > PGP key : http://www.kfki.hu/~kadlec/pgp_public_key.txt
> > Address : KFKI Research Institute for Particle and Nuclear Physics
> > H-1525 Budapest 114, POB. 49, Hungary
> >
> >
> >
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
( Raymond Leach )
) Knowledge Factory (
( )
) Tel: +27 11 445 8100 (
( Fax: +27 11 445 8101 )
) (
( http://www.knowledgefactory.co.za/ )
) http://www.saptg.co.za/ (
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
o o
o o
.--. .--.
| o_o| |o_o |
| \_:| |:_/ |
/ / \\ // \ \
( | |) (| | )
/`\_ _/'\ /'\_ _/`\
\___)=(___/ \___)=(___/
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2002-12-11 6:20 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <FD8F124A387AD6119F7900A0D218B321561982@hslex01.hslbz.local>
2002-12-10 9:43 ` portfw on iptables 2.4 kernel problem Rob Sterenborg
2002-12-10 11:00 ` Raymond Leach
2002-12-10 11:22 ` Jozsef Kadlecsik
2002-12-10 11:32 ` Raymond Leach
2002-12-10 11:52 ` Jozsef Kadlecsik
2002-12-10 12:12 ` Raymond Leach
2002-12-11 6:08 ` louie miranda
2002-12-11 6:20 ` Raymond Leach [this message]
[not found] <96C102324EF9D411A49500306E06C8D1021AE462@eketsv02.cubis.de >
2002-12-12 8:51 ` Rasmus Reinholdt Nielsen
2002-12-12 14:25 ` Joel Newkirk
2002-12-12 8:09 Reckhard, Tobias
-- strict thread matches above, loose matches on Subject: below --
2002-12-12 7:33 Reckhard, Tobias
2002-12-12 7:31 Reckhard, Tobias
2002-12-11 9:00 Reckhard, Tobias
2002-12-11 14:25 ` Joel Newkirk
2002-12-11 7:32 Reckhard, Tobias
2002-12-11 8:05 ` Joel Newkirk
2002-12-10 8:56 louie miranda
2002-12-10 9:01 ` Raymond Leach
2002-12-10 9:11 ` louie miranda
2002-12-10 9:01 ` Paulo Andre
2002-12-10 9:12 ` louie miranda
2002-12-11 11:26 ` Andrea Rossato
2002-12-12 3:11 ` louie miranda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1039587605.1714.131.camel@rayw.knowledgefactory.co.za \
--to=raymondl@knowledgefactory.co.za \
--cc=lmiranda@chikka.com \
--cc=netfilter@lists.netfilter.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.