From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Knecht Subject: Re: possible problems with rc6 aplay Date: 16 Dec 2002 17:44:44 -0800 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1040089485.1305.1.camel@Godzilla> References: <200212151910.18nLEb5ck3NZFjX0@robin> <3DFE5965.90F4A8B7@earthlink.net> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <3DFE5965.90F4A8B7@earthlink.net> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: patrick reardon Cc: Paul Davis , Alsa-Devel List-Id: alsa-devel@alsa-project.org Patrick, I believe the AI-3 operates at 48K if it is not receiving a clock via it's ADAT input. If the ADAT input is applied and provides 44.1K, then it is my understanding that the AI-3 operates at 44.1K. Mark On Mon, 2002-12-16 at 14:53, patrick reardon wrote: > > yes, thnx, it's much clearer now. my converter is external with no rate switches and from > the manual i just discovered it always operates at 48000 (Alesis AI-3). i'm still > uncertain how to change the card's configuration though. "alsactl" doesn't seem to > provide an obvious way to do this (looking at the man page). but my asound.state file has ------------------------------------------------------- This sf.net email is sponsored by: With Great Power, Comes Great Responsibility Learn to use your power at OSDN's High Performance Computing Channel http://hpc.devchannel.org/